Lights Peugeot 307 CC 2003 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2003, Model line: 307 CC, Model: Peugeot 307 CC 2003Pages: 173, PDF Size: 2.12 MB
Page 3 of 173
22-09-2003
3YOUR 307 CC AT A GLANCE
1 -Speaker (tweeter).
2 - Windscreen demisting vents.
3 - Alarm button.
4 - Multi-function display.
5 - Central locking button.
6 - Hazard warning lights switch.
7 - Electronic stability control(ESP/ASR) button.
8 - Central adjustableheating/ventilation ventsand air flow regulation.
9 - Instrument panel.
10 - Windscreen wash-wipe/tripcomputer stalk.
11 - Driver's air bag. Horn.
12 - Audio remote control stalk.
13 - Headlamp height adjustment. 14 -
Electric mirror controls. Window controls.Rear window disarming control.
15 - Steering lock and ignition.
16 - Lights and directionindicators stalk.
17 - Cruise control.
18 - Steering wheel adjustmentcontrol.
19 - Gear lever.
20 - 12 V accessories socket.
21 - Can holder.
22 - Retractable roof control.
23 - Simultaneous control of all4 windows.
24 - Storage compartment.
25 - Coin storage. Passenger air bag disarming switch*.
26 - Handbrake.
27 - Rear footwell heating vent. 28 -
Side air bags.
29 - Front ashtray.
30 - Heating/automatic air conditioning controls.
31 - CD changer.
32 - Audio RD3 or
audio/telephone RT3.
33 - Passenger air bag.
34 - Glove box.
35 - Fuse box.
36 - Bonnet opening control.
37 - Side adjustableheating/ventilation vent andair flow regulation.
38 - Side window demisting vent.
* According to destination.
Page 6 of 173
22-09-2003
102104
6YOUR 307 CC AT A GLANCE
Front and rear lights (ring A)Lights off. Side lights.
Dipped/main beam headlamps. Automatic switching onof the lights.
Automatic switchingon of the lights
To activate or deactivate the function, place the key in theaccessories position, the lightsstalk in position 0and press the
end of the lights stalk for morethan four seconds. WINDSCREEN WIPERS
2 Rapid wipe(heavy rain).
1 Normal wipe(moderate rain).
I Intermittent wipe.
or
AUTO Automatic wipe.
0 Off.
Single wipe.
Windscreen wash-wipe: pull the stalk towards you. Automatic wipe In the AUTO position, the wiper
operates automatically and adjusts its speed to the intensityof the rainfall.
Front fog lamps/Rearfog lamp (ring B)
Front fog lamps (first rota-tion of the ring forwards)
Front fog lampsand rear fog lamp(second rotation ofthe ring forwards)
Switching off: rotation of the ringbackwards.
STEERING WHEEL STALKS LIGHTING
Page 23 of 173
PEUGEOT SERVICING25
TYPE A AND C SERVICES AND THE INTERMEDIATE VISIT
Level
Operations Operation descriptions1st service visitA C Intermediate
DRAIN AND REFILLÐ Engine oil
Ð Oil filter Ð Fuel filter* REPLACEÐ Air filter element Ð Spark plugs Ð Engine oil (check + top-up) Ð Manual gearbox oil (check + top-up) Ð Battery (check + top-up) if removable cap LEVELSÐ Front windscreen wash (check + top-up) Ð Coolant (check + top-up) Ð Brake fluid (check + top-up) Ð Power steering fluid (check + top-up according to specification) Ð Operation of lights and indicators Ð Condition of glass, headlamp and light lenses and mirrors Ð Horn Ð Windscreen jets Ð Condition of wiper blades Ð Condition and tension of the ancillary drive belts Ð Handbrake Ð Condition of hydraulic circuits (hoses and covers) and check for leaks CHECKÐ Condition of rubber boots and gaiters Ð Brake pad wear Ð Play in hubs, link rods, ball joints, flexible mountings Ð Shock absorbers: check for leaks Ð Rear drum brake lining wear Ð Condition and pressure of tyres (including spare tyre) Ð Emission control check according to current legislation Ð Passenger compartment filter (according to specification) Ð Visual check of the whole vehicle by a PEUGEOT dealer
SERVICE*Ð Courtesy vehicle
ROAD TEST
: All driving conditions : If there are specific conditions * According to destination.22-09-2003
Page 28 of 173
22-09-2003
INSTRUMENTS AND CONTROLS
30
INSTRUMENTS AND CONTROLS
A permanently lit warning light or one that flashes with the engine run-ning, indicates an operating fault inthe relevant unit. Some warninglights may be linked to buzzers anda message on the multi-function dis-
play. Do not ignore this warning:contact a PEUGEOT dealer as soonas possible.
If the Central STOP warning light comes on when you are driving,stop immediately where it is safeto do so.
Central STOP warning light
This light comes on each time the ignition is switched on. It is linked to the "engine oil pres- sure", ''coolant level low'', ''brakefluid level'' and "electronic brakeforce distribution fault'' warning lightsand the ''coolant temperature'' and"engine oil temperature" gauges. Stop immediately if it flashes with the engine running.
Contact a PEUGEOT dealer. Engine oil pressure warning light
Linked to the central STOPwarning
light. If it comes on with the engine running, it is accompanied by an audible signaland the message "Oil pressure
insufficient" or "Top up engine oil
level" on the multi-function display.
Stop immediately. If there is a lack of oil in the lubrication circuit, top up the level.
Contact a PEUGEOT dealer without
delay.
Low coolant level warning light*
Linked to the central STOPwarning
light. This comes on for approximately
3 seconds each time the ignition isswitched on. This warning light is accompanied by an audible signal and the message
"Top up engine coolant level" on
the multi-function display.
Stop immediately.
* According to engine. Warning:
Allow the engine to cool
before topping up. The cooling system is pressurised.
To prevent the risk of scalding, unscrew the cap by two turns toallow the pressure to drop. Once the pressure has dropped, remove the cap and top up the level.
Contact a PEUGEOT dealer.
Handbrake and low brake fluid levelwarning light Linked to the central STOP
warning light. This comes on each time the ignition is switched on. Illumination of this light is accompa- nied by an audible signal and a mes-sage on the multi-function displayindicating the cause of the warning: Ð "Handbrake on" , if the handbrake
is applied or has not been released
correctly,
Ð "Brake fluid level low" if there is
an excessive drop in the brake fluid(if the light remains on even with thehandbrake released),
Ð "Braking fault" is displayed simul-
taneously with the ABS light, indi-cating a malfunction of the elec-tronic brake force distribution.
Stop immediately.
Contact a PEUGEOT dealer.
Page 32 of 173
INSTRUMENTS AND CONTROLS33
"SPORT" indicator light This comes on when the
"SPORT"programme on
the automatic gearbox is selected. "SNOW" indicator light This comes on when the "SNOW"programme on
the automatic gearbox is selected.
Operating fault This is displayed when an operating fault occurs, accompanied by the message "Automatic gear
fault" on the multi-function display, an audible signal
and flashing of the Sport and Snow indicator lightson the instrument panel.
Examples: "SPORT"programme and
Park position.
"SNOW" programme and
Drive position.
Park ReverseNeutral Drive
Manual mode: 1st gear engaged 2nd gear engaged3rd gear engaged 4th gear engaged
Selector lever positions on the automatic gearbox display
Automatic gearbox indicator lights
22-09-2003
Page 33 of 173
22-09-2003
Lighting rheostat With the lights on, press the button tovary the intensity of thelighting of the instru-ments and controls.
When the lighting reaches the mini-mum (or maximum) setting, release thebutton then press it again to increase(or reduce) the brightness. As soon as the lighting is of the required brightness, release the button.
Trip recorder zero reset With the ignition on, press the button.
Instrument panel display After switching on the ignition, three functions are shown in succession:
Ð service indicator (see corresponding section),
Ð engine oil level indicator,
Ð total distance recorder (total and trip distances).Note:
the total and trip distances are displayed for 30 seconds when the ignition
is switched off, on opening the driver's door, as well as on locking and unlocking the vehicle. Engine oil level indicator When the ignition is switched on, the engine oil level is indicated for approxi- mately 10 seconds, after the servicing information.
Surplus oil Flashing indicates a surplus of oil which can cause damage to the engine. If the surplus of oil is confirmed by checking using the dipstick,
contact a PEUGEOT dealer without delay. No oil Flashing indicates a lack of oil which can cause damage to the engine. If the lack of oil is confirmed by checking using the dipstick, it is essential to top up the level. Oil level gauge fault Check the oil level using the dipstick. If the level is correct, the flashing indicates a true engine oil level gauge fault.
Contact a PEUGEOT dealer.
INSTRUMENTS AND CONTROLS
34
The value obtained by checking the level using the dipstick is only correct if the vehicle has been on level ground, with the engine off, for more than 10 min
utes.
Page 65 of 173
22-09-2003
YOUR 307 CC IN DETAIL
66
Services*
Press button Eto display the "Services"menu and select one of the following services:
¥ "Customer Contact Centre" which enables you to contact the PEUGEOT Customer Contact Centre directly and
access the services offered (this type of call is suspended if an emergency or breakown call is made).
¥ "PEUGEOT Assistance" which enables you to contact the call centre which controls the PEUGEOT breakdown
service directly and receive rapid assistance (you have 6 seconds within which to cancel the call when it is made). During the breakdown call phase it is not possible to make any other calls with the exception of emergency calls.
¥ "Operator services" which gives access to the list of services specific to the operator (e.g.: customer service, consump-
tion monitoring, news, stock market, weather, travel, games, etc) if they are available.
Emergency call*
In an emergency, press button Vuntil a signal is heard and a call validation / deletion screen is displayed (delay of
6 seconds) or enter 11 2directly.
In the absence of a specific service contract, the parameters of the SOSbutton are set so that a call is made to 11 2- unique
number made available by the worldwide GSM network, reserved for emergency calls. Before making a call of this kind, the audio/telephone must detect a cellular network. No security mode is required and, depending on the network, you do not need to insert your SIM card or enter your PIN. If you have signed the specific contract, refer to its general conditions.
"PEUGEOT Assistance"/Emergency call
During a connection to "PEUGEOT Assistance" or an emergency call, it is not possible to send or receive calls or SMS messages; these will be transferred to your voice mail.
In this case, a green diode flashes on the RT3 audio/telephone panel, when the emergency call or "PEUGEOT Assistance" call procedure begins, then lights continuously when the call is taken by the services concerned.
* If option and service available.
Page 66 of 173
22-09-2003
YOUR 307 CC IN DETAIL67
Voice commands The voice commands make it possible to use pre-recorded words or phrases to control a certain number of functions of the
RT3 audio/telephone. Activation of the voice commands Press the button on the end of the lights stalk to activate this function. Example: to recall the radio station stored on button 3, the key words are: "Radio" "Memory" "3" .
To use these key words, you must say the word "Radio", wait for the audible confirmation signal, then say the word
"Memory" , wait for the audible confirmation signal, then end with the word "3", wait for the audible confirmation signal which
will carry out the action requested. Notes: Ð between two key words, a screen indicates the time remaining and the key word recognised,
Ð in the absence of any voice commands, this function will be switched off after approximately five seconds,Ð if a command is not understood, the system transmits "Pardon"and displays "Word not recognised" on the screen.
Saying the phrase "Help"or "What can I say" displays all of the commands available on the screen.
List of commands available
Ð For the radio, say "RADIO", then: "PREVIOUS"/"FOLLOWING"/"MEMORY" + 1...6/"AUTOSTORE"
Ð For the CD, say "CD PLAYER", then: "PREVIOUS TRACK"/"FOLLOWING TRACK"/"TRACK NUMBER" + 1..20/"SHUFFLE"/"SCAN"/"REPEAT"
Ð For the CD changer, say "CHANGER", then: "PREVIOUS TRACK"/"FOLLOWING TRACK"/"TRACK NUMBER" + 1...20/"PREVIOUS DISC"/"FOLLOWING DISC"/
"DISC NUMBER" + 1...5/"SHUFFLE"/"SCAN"/"REPEAT"
Ð For the telephone, say "TELEPHONE", then: "LAST NUMBER"/"DIRECTORY" + DESCRIPTION/"SERVICES"
Ð For navigation, say "NAVIGATION", then: "STOP"/"RE-START"/"DIRECTORY" + DESCRIPTION
Ð To change the permanent application, say "DISPLAY", then: "AUDIO"/"TELEPHONE"/"NAVIGATION"/"TRIP COMPUTER"
Ð To call someone recorded in the directory directly, say "CALL" + DESCRIPTION
Ð To be guided to the address of someone recorded in the directory, say "GUIDE TO" + DESCRIPTION.
Ð Various:
"CANCEL"/"HELP"/"WHAT CAN I SAY"
Page 69 of 173
22-09-2003
YOUR 307 CC IN DETAIL
70
SATELLITE NAVIGATION SYSTEM Introduction The satellite navigation system guides you, by means of
vocal and
visual instructions (graphics), to
your chosen destination.
The heart of the system lies in the useof a map data base and GPS (Global
Positioning System) . With this sys-
tem you can fix the position of yourvehicle by means of a satellite net-work.
The system uses the following ele-ments:
Ð the CD-Rom drive,
Ð the configuration CD-Rom,
Ð the navigation CD-Rom,
Ð the last voice message recall con- trol,
Ð the control keypad,
Ð the CT monochrome screen or the DT colour screen. The CD-Rom drive
This is part of the RT3 radio/telephone. 1.
Ejection button on CD-Rom.
2. CD-Rom housing.
The navigation CD-Rom This contains all the map data. It must be inserted in the drive, printed face upwards.
Use only CD-Roms approved by PEUGEOT. In the cabriolet position, remember to remove the CD-Rom from the drive (risk of theft). The last voice message recall control. Pressing for more than two seconds on the button at the end of the lights stalk repeats the last voice information.
Certain functions or services
described may vary depending
on the version of CD-Rom or the
country where the vehicle is sold.
For safety reasons, the inputting of navigationinformation by the drivermust be carried out when
the vehicle is stationary.
Page 83 of 173
22-09-2003
YOUR 307 CC IN DETAIL83
5. Air distribution
Successive presses of this button allow the air flow tobe directed alternately to:
Ð the windscreen (demisting or de-icing),
Ð the windscreen and the footwells,
Ð the footwells,
Ð the central and side vents and the footwells,
Ð the central and side vents.
7. Air intake
Press this button to recycle
the interior air. Recirculation,
shown on the display, pre-ventsthe entry of unpleasant
odours and fumes from the outside.
Avoid prolonged recirculation of the
interior air. To do this, press again toreturn the system to automatic pro-cessing of the air intake. Note: To prevent condensation on
the inside of the vehicle in cold or
wet weather, you are advised toavoid using this mode.
4. Air conditioning
Press this button to stop
cooling of the air. The"ECO"symbol lights up.
Press again to return to
automatic operation of the air condi-tioning. The "A/C"symbol is dis-
played. 8. Switching the system off
The
OFF button enables the
entire system to be switched off.
Temperature-related com-fort is no longer guaranteed
but a minimal flow of air is main-tained to prevent misting and to
renew the air. Pressing the OFF, AUTO or "visibility"
button again reactivates the system with the values set before it was
switched off.
Note: if you wish to cut off the flow of air
completely, press the air intake button 7.
9. De-icing the rear window and
the mirrors
Press this button to de-icethe rear screen and the mir-
rors. The de-icing system
switches off automatically.
It is possible to stop the de-icing
before it switches off automaticallyby pressing the button again. Note: this function is disarmed when
the roof is stored in the boot. Important precaution Operate the air conditioning system for 5 to 10 minutes, once or twice amonth, to keep it in perfect working
order. If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Manual operation
If you wish you can make a different
choice from the one offered by the
system, by changing a setting. Theother functions will still be managed
automatically. Press the
AUTObut-
ton to return to completely automaticoperation.
6. Air flowThe air flow may beincreased or reducedby pressing the buttons+or Ðrespectively.
Notes The condensation created by the air conditioning causes a normal flow ofwater under the vehicle when sta-
tionary.
To prevent condensation on the inside of the vehicle in cold or wet
weather, you are advised to avoidusing the "ECO"mode.