Peugeot 308 2016 Owner's Manual

359
308_en_Chap10c_SMegplus_ed02-2015
Settings
QUESTIONANSWER SOLUTION
In changing the setting
of treble and bass the
equalizer setting is
deselected.
the
selection of an equalizer setting imposes the balance settings.
Modifying one without the other is not possible. Modify the balance or equalizer settings to obtain
the desired musical ambience.
In changing the equalizer
setting, treble and bass
return to zero.
When changing the
balance settings, the
distribution setting is
deselected.
the se

lection of a distribution setting imposes the balance settings.
Modifying one without the other is not possible. Modify the balance or distribution settings to
obtain the desired musical ambience.
When changing an
distribution setting,
the balance setting is
deselected.
.
Audio and telematics

360
308_en_Chap10c_SMegplus_ed02-2015
QUESTIONANSWER SOLUTION
the

re is a difference in
sound quality between the
different audio sources. For optimum sound quality, the audio settings for Volume, Bass,
tre

ble,
equ
alizer and Loudness can be adapted to the different
sound sources, which may result in audible differences when
changing source. Check that the audio settings for (Volume, Bass,
tre

ble,
equ
alizer, Loudness) are adapted to the
sources listened to. It is advisable to set the
Audio functions (Bass,
tre

ble, Fr-Re balance,
Le-Ri balance) to the middle position, select the
"Linear", musical ambience and set the loudness
correction to the "Active" position in CD mode or
to the "Inactive" position in radio mode.
With the engine off, the
system switches off after a
few minutes of use. When the engine is switched off, the system's operating time
depends on the state of charge of the battery.
the s

witch-off is normal: the system switches to economy mode and
switches off to prevent discharging of the vehicle's battery. Start the vehicle's engine to increase the battery
charge.
Audio and telematics

361
308_en_Chap10c_SMegplus_ed02-2015
Telephone
QUESTIONANSWER SOLUTION
I cannot connect my
Bluetooth telephone.
the t
elephone's Bluetooth function may be switched off or the
telephone may not be visible. -
Ch

eck that your telephone's Bluetooth
function is switched on.
-
Ch

eck in the telephone settings that it is
"visible to all".
the B

luetooth telephone is not compatible with the system. You can check the compatibility of your telephone
at www.peugeot.co.uk (services).
the v

olume of the
telephone connected
in Bluetooth mode is
inaudible.
the v

olume depends both on the system and on the telephone. Increase the volume of the audio system, to maximum if required, and increase the volume of
the telephone if necessary.
the a

mbient noise level has an influence on the quality of telephone
communication. Reduce the ambient noise level (close the
windows, reduce the booster fan speed, slow
down, ...).
Some contacts are
duplicated in the list.
the o

ptions for synchronizing contacts are synchronizing the
contacts on the SIM card, the contacts on the telephone, or both.
When both synchronizations are selected, some contacts may be
duplicated. Select "Display SIM card contacts" or "Display
telephone contacts".
Contacts are not shown in
alphabetical order. Some telephones offer display options. Depending on the settings
chosen, contacts can be transferred in a specific order. Modify the display setting in the telephone
di r e c to r y.
the s

ystem does not receive
SMS text messages.
the B

luetooth mode does not permit sending SMS text messages to
the system.
.
Audio and telematics

363
308_en_Chap10d_RD45_ed02-2015
PeugeOt C onnect Sound (RD5)
Audio system / Bluetooth®
Contents
First steps 36 4
Steering mounted controls
36

5
Menus
3

66
Radio
36

6
DAB (Digital Audio Broadcasting) radio
36

8
Media
37

0
tele

phone
3
74
Screen menu map(s)
37

6
Frequently asked questions
37

9
Your P
eu

ge
Ot C

onnect Sound (RD5) is coded in such a way
that it will only operate in your vehicle. As a safety measure, the driver must only carry out operations
which require prolonged attention while the vehicle is stationary.
When the engine is switched off and to prevent discharging of the
battery, the audio equipment may switch off after a few minutes.
.
Audio and telematics

364
308_en_Chap10d_RD45_ed02-2015
First steps
On/off, volume setting.
Display the list of local stations.
Long press: CD tracks or MP3 folders
(CD /
uSB
).
Select source:
Radio; audio CD / MP3 CD;
uSB

;
Jack connection; Streaming; A
uX.
S

elect wavebands FM, DAB and AM. Audio settings: front/rear fader, left/
right balance, bass/treble, loudness,
audio ambiences.
tA (tra

ffic Announcements) on/off. Select the screen display mode:
date, audio functions, telephone,
Bluetooth, personalisation-
configuration.
Select next frequency down/up.
Select previous/next MP3 folder.
Select previous/next folder / genre /
artist / playlist (
uSB

).
Abandon the current operation. Confirm.
Buttons 1 to 6:
Select a pre-set radio station.
Long press: pre-set a station. Automatic frequency search down/up.
Select previous/next CD, MP3 or
uSB t

rack.
Display main menu.
Audio and telematics

365
308_en_Chap10d_RD45_ed02-2015
Steering mounted controls
Radio: select the previous/next
pre-set station.
uSB
: select genre / artist / folder
from the classification list.
Select the previous/next item in a
menu.
Volume decrease.
Radio: automatic search for a higher
frequency.
CD / MP3 /
uSB

: select the next
track.
CD /
uSB

: continuous press: fast
forward.
Move in the list.
Mute: press the volume increase and
decrease buttons simultaneously.
the s

ound is restored by pressing
one of the two volume buttons. Radio: automatic search for a lower
frequency.
CD / MP3 /
uSB

: select the previous
track.
CD /
uSB

: continuous press: fast
back.
Move in the list.
Change audio source.
Confirm a selection.
Call/end call on the telephone.
Press for more than 2 seconds:
telephone main menu. Volume increase.
.
Audio and telematics

366
308_en_Chap10d_RD45_ed02-2015
Menus
Screen C
Multimedia
Media parameters, Radio
parameters.
Telephone
Call, Directory management,
tel
ephone management, Hang up.
Bluetooth connection
Connections management, Search
for a device.
Personalisation-configuration
Define the vehicle parameters,
Choice of language, Display
configuration, Choice of units, Date
and time adjustment. For a detailed global view of the menus
available, refer to "Screen menu map"
section.
Radio
Selecting a station
Press the SRC
button repeatedly and
select the radio.
Press the BAND button to select a
waveband.
Briefly press one of the buttons to
carry out an automatic search of the
radio stations.
Press one of the buttons to carry out
a manual search up / down for radio
frequencies.
Press the LIST button to display the
list of stations received locally
(30 stations maximum).
to up

date this list, press for more
than two seconds.
Screen A
Audio and telematics

367
308_en_Chap10d_RD45_ed02-2015
RDS
the external environment (hills,
b uildings, tunnels, basement car
parks,
.

..) may block reception,
including in RDS mode.
thi

s is a
normal effect of the way in which radio
waves are transmitted and does not
indicate any failure of the audio system.
Press the MENU button.
Select " Audio functions ".
Press OK.
Select the " FM waveband
preferences " function.
Press OK. Select "
Activate RDS ".
Press OK , RDS is displayed in the
screen.
In " Radio " mode, press OK directly to activate /
deactivate RDS mode.
RDS, if displayed, enables you to continue
listening to the same station by automatic
retuning to alternative frequencies.
However, in certain conditions, coverage
of an RDS station may not be assured
throughout the country as radio stations
do not cover 100 % of the territory.
thi

s
explains the loss of reception of a station
that can occur during a journey.
Receiving TA messages
Press the TA button to activate or
deactivate traffic messages.
the tA (tra
ffic Announcement)
function gives priority to
tA al
ert
messages.
to op
erate, this function
needs good reception of a radio station
transmitting this type of message.
When a traffic report is transmitted, the
current audio source (Radio, CD, ...)
is interrupted automatically to play the
tA me
ssage. Normal playback of the
audio source resumes at the end of the
transmission of the message.
.
Audio and telematics

368
308_en_Chap10d_RD45_ed02-2015
DAB (Digital Audio Broadcasting) radio
Display options:
if active but not available, the display will be
struck out.Preset stations, buttons 1 to 6.
Short press: select the preset radio
station.
Long press: preset a radio station.
Display the name of the multiplex
service being used.
Represents the signal strength for the
band being listened to. Display of Radio
tex

t (
tXt) fo
r the
current radio station. Display the name of the current
station.
If the "DAB" station being listened to
is not available on "FM", "DAB
F

M" is
struck out.
Audio and telematics