engine PEUGEOT 4007 2010 User Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2010, Model line: 4007, Model: PEUGEOT 4007 2010Pages: 215, PDF Size: 15.37 MB
Page 31 of 215
2
COMFORT
AUTOMATIC AIR
CONDITIONING
Automatic operation
S e t t h e t e m p e r a t u r e c o n t r o l d i a l 3 to
t h e t e m p e r a t u r e r e q u i r e d .
P l a c e t h e a i r fl o w c o n t r o l d i a l 2 in
the "AUTO" p o s i t i o n .
Place the air distribution adjustment
dial 1 in the "AUTO" p o s i t i o n . When the engine is cold, to avoid
an excessive distribution of cold
air, the ventilation will reach its
o p t i m u m l e v e l g r a d u a l l y .
On entering the vehicle, the in-
t e r i o r t e m p e r a t u r e m a y b e m u c h
c o l d e r ( o r w a r m e r ) t h a n t h e
c o m f o r t t e m p e r a t u r e . T h e r e i s
n o n e e d t o c h a n g e t h e t e m p e r a -
t u r e d i s p l a y e d i n o r d e r t o r e a c h
t h e c o m f o r t r e q u i r e d r a p i d l y .
The automatic regulation of the
a i r c o n d i t i o n i n g w i l l o p e r a t e t o
c o r r e c t t h e t e m p e r a t u r e d i f f e r -
e n c e a s q u i c k l y a s p o s s i b l e .
1. Air distribution adjustment
2. A i r fl o w a d j u s t m e n t
3. T e m p e r a t u r e a d j u s t m e n t
4. Rear screen demisting/defrosting
5. Air conditioning On/Off
6. Intake of exterior air/Recirculation
of interior air
In automatic mode:
w h e n t h e t e m p e r a t u r e i s s e t t o m a x -
i m u m ( R a p i d h e a t i n g ) , t h e i n t a k e o f
exterior air is activated and the air
c o n d i t i o n i n g s t o p s .
w h e n t h e t e m p e r a t u r e i s s e t t o
m i n i m u m ( R a p i d c o o l i n g ) , t h e a i r
recirculation is activated and the air
c o n d i t i o n i n g o p e r a t e s .
The system controls the air distribu-
t i o n , a i r fl o w , t e m p e r a t u r e a n d a i r i n t a k e
to ensure the level of comfort and ad-
e q u a t e a i r c i r c u l a t i o n i n t h e p a s s e n g e r
c o m p a r t m e n t . N o f u r t h e r a c t i o n o n y o u r
p a r t i s r e q u i r e d .
Page 38 of 215
2
COMFORT
Head restraint height adjustment Front armrest
Heated seats adjustment
The adjustment is correct when
t h e t o p o f t h e h e a d r e s t r a i n t i s
a l i g n e d w i t h t h e t o p o f t h e h e a d
o f t h e s e a t e d p e r s o n .
N e v e r d r i v e w i t h t h e r e m o v e d
head restraints in the vehicle as
they could be thrown around the
v e h i c l e o n s h a r p b r a k i n g . T h e y
m u s t b e i n p l a c e a n d a d j u s t e d
c o r r e c t l y .
After installing the head restraint,
check that the height adjustment
b u t t o n i s l o c k e d c o r r e c t l y .
You can move the console housing cover
i n o r d e r t o u s e i t a s a n a r m r e s t .
With the engine running , tilt the but-
t o n t o t h e p o s i t i o n r e q u i r e d .
T h e t e m p e r a t u r e o f t h e s e a t i s r e g u l a t -
e d a u t o m a t i c a l l y .
T h e r e a r e t w o s e t t i n g p o s i t i o n s :
- " H I " : H i g h h e a t i n g
- "LO": Low heating
When the button is in the intermediate
p o s i t i o n , t h e h e a t i n g i s s w i t c h e d o f f .
T h e i n d i c a t o r l a m p s A come on when
t h e s y s t e m i s a c t i v a t e d . T o r a i s e t h e h e a d r e s t r a i n t , p u l l i t u p -
w a r d s .
T o l o w e r t h e h e a d r e s t r a i n t , p u s h i t
d o w n w a r d s p r e s s i n g t h e h e i g h t a d j u s t -
m e n t b u t t o n a t t h e s a m e t i m e .
To remove the head restraint, bring it to
t h e u p p e r m o s t p o s i t i o n t h e n r e m o v e i t
p r e s s i n g t h e h e i g h t a d j u s t m e n t b u t t o n
a t t h e s a m e t i m e .
T o r e fi t t h e h e a d r e s t r a i n t , e n g a g e t h e
stems of the head restraint in the holes
p r e s s i n g t h e h e i g h t a d j u s t m e n t b u t t o n
a t t h e s a m e t i m e .
Page 47 of 215
2
COMFORT
DOOR MIRRORS DOOR MIRRORS
Electric folding/unfolding
- from inside, with the ignition switch i n t h e " O N " o r " A C C " p o s i t i o n :
b y p r e s s i n g t h e c o n t r o l C .
- from inside, with the ignition switch i n t h e " L O C K " p o s i t i o n :
b y p r e s s i n g t h e c o n t r o l C, w i t h i n
30 seconds.
- from outside using the remote control:
b y p r e s s i n g t h e " c l o s e d p a d -
l o c k b u t t o n b r i e fl y 3 t i m e s t o f o l d
them,
b y p r e s s i n g t h e " o p e n p a d l o c k "
b u t t o n b r i e fl y 3 t i m e s t o u n f o l d
t h e m .
Adjustment
The mirrors can be adjusted when the
i g n i t i o n s w i t c h i s i n t h e " O N " o r " A C C "
p o s i t i o n .
Move control A to the right or to the left
t o s e l e c t t h e c o r r e s p o n d i n g m i r r o r .
Direct control B in all four directions
t o a d j u s t t h e m i r r o r .
W h e n a d j u s t m e n t i s c o m p l e t e , r e t u r n
control A t o t h e c e n t r a l p o s i t i o n . If you switch the engine off then
re-start it with the mirrors fol-
ded, they will unfold automati-
cally when the vehicle reaches
2 0 m p h ( 3 0 k m / h ) .
If the mirrors have been folded
manually or electrically after
starting the engine, they are not
u n f o l d e d a u t o m a t i c a l l y .
In this case:
Press the control C to unfold
t h e m .
If you have folded the mirrors
using the control
C , you must
use this control to unfold them,
otherwise the mirrors will not be
l o c k i n p l a c e c o r r e c t l y .
The folding and unfolding of
the door mirrors can be con-
fi g u r e d v i a t h e c o l o u r s c r e e n
" E q u i p m e n t " m e n u o r d e a c t i v a t -
e d b y a P E U G E O T d e a l e r .
T h e m i r r o r s c a n a l s o b e f o l d e d m a n u a l l y .
Page 52 of 215
2
COMFORT
A r m r e s t w i t h s t o r a g e c o m p a r t m e n t s
12 volt socket (120 W max)
Upper storage compartment
P u l l t h e r i g h t - h a n d l e v e r t o o p e n t h e
s t o r a g e c o m p a r t m e n t l i d , w h i c h s e r v e s
a s a n a r m r e s t .
T o c l o s e , f o l d d o w n t h e l i d u n t i l i t l o c k s .
12 volt socket (120 W max)
L o w e r s t o r a g e c o m p a r t m e n t
P u l l t h e l e f t - h a n d l e v e r t o o p e n t h e l i d .
T o c l o s e , f o l d d o w n t h e l i d u n t i l i t l o c k s .
T h i s i s o p e r a t i o n a l w h e n t h e i g n i t i o n
s w i t c h i s i n t h e " L O C K " , " O N " o r " A C C "
p o s i t i o n .
C h e c k t h a t t h e e l e c t r i c a l e q u i p m e n t o p -
erates on 12 volts and that its electrical
p o w e r i s 1 2 0 W m a x i m u m .
T h e p r o l o n g e d u s e o f e l e c t r i -
c a l e q u i p m e n t w i t h o u t r u n n i n g
the engine may discharge the
b a t t e r y .
Page 60 of 215
3
ACCESS
The vehicle will relock automati-
cally after thirty seconds unless
a door or the tailgate is opened.
This function prevents inadvert-
ent unlocking.
The duration which precedes
the automatic relocking of the
v e h i c l e c a n b e c o n fi g u r e d v i a
the colour screen "Equipment"
menu.
Folding the key
First press button A to fold the key. Electronic engine immobiliser
The key contains an electronic chip
which has a special code. When the igni-
tion is switched on, this code must be
recognised to permit starting.
This electronic engine immobiliser locks
the engine management system a few
moments after the ignition is switched
off and prevents starting of the engine
by anyone who does not have the key.
Anti-theft protection
In the event of a malfunction and if
your vehicle does not start; contact a
PEUGEOT dealer as soon as possible.
Page 61 of 215
3
ACCESS
Starting the vehicle
Insert the key in the ignition switch.
Operate the starter by turning the
key to position 4 (START) .
When the engine turns over, release
the key. The ignition switch is placed
in position 3 (ON) automatically. Switching the vehicle off
Park the vehicle.
While pressing the key, turn it to-
wards you to position 1 (LOCK) .
Remove the key from the ignition
switch. Changing the battery
Battery reference: CR1616/3 volts.
Unclip the casing using a coin at the
notch.
S l i d e t h e fl a t b a t t e r y o u t o f i t s h o u s i n g .
Slide the new battery into its housing
observing the original direction.
Clip the casing.
Key in ignition
A buzzer sounds on opening the
driver's door, if the key has been
left in the ignition.
Page 63 of 215
3
ACCESS
The vehicle will relock automati-
cally after thirty seconds unless
a door or the tailgate is opened.
This function prevents inadvert-
ent unlocking.
The duration which precedes
the automatic relocking of the
v e h i c l e c a n b e c o n fi g u r e d v i a
the colour screen "Equipment"
menu.
Folding the key
First press button A to fold the key. Electronic engine immobiliser
The key contains an electronic chip
which has a special code. When the igni-
tion is switched on, this code must be
recognised to permit starting.
This electronic engine immobiliser locks
the engine management system a few
moments after the ignition is switched
off and prevents starting of the engine
by anyone who does not have the key.
Anti-theft protection
In the event of a malfunction and if
your vehicle does not start; contact a
PEUGEOT dealer as soon as possible.
Page 65 of 215
3
ACCESS
Starting the vehicle
Insert the key in the ignition switch.
Operate the starter by turning the
key to position 4 (START) .
When the engine turns over, release
the key. The ignition switch is placed
in position 3 (ON) automatically. Switching the vehicle off
Park the vehicle.
While pressing the key, turn it to-
wards you to position 1 (LOCK) .
Remove the key from the ignition
switch. Changing the battery
Battery reference: CR1616/3 volts.
Unclip the casing using a coin at the
notch.
S l i d e t h e fl a t b a t t e r y o u t o f i t s h o u s i n g .
Slide the new battery into its housing
observing the original direction.
Clip the casing.
Key in ignition
A buzzer sounds on opening the
driver's door, if the key has been
left in the ignition.
Page 76 of 215
3
ACCESS
FUEL TANK Opening the cap may cause an inrush
of air. This vacuum, which is completely
normal, is caused by the sealing of the
fuel system.
T o fi l l t h e t a n k s a f e l y :
the engine
must be
switched off,
pull the control A located at the bot-
tom right of the driver’s seat to re-
l e a s e t h e f u e l fi l l e r fl a p ,
o p e n t h e f u e l fi l l e r fl a p B ,
t u r n t h e fi l l e r c a p C to the left,
W h e n y o u h a v e fi l l e d t h e t a n k :
r e fi t t h e fi l l e r c a p , i n s e r t i n g t h e u p -
p e r p a r t fi r s t ,
s c r e w i n t h e fi l l e r c a p t o t h e r i g h t ,
c l o s e t h e fl a p .
E n s u r e t h a t t h e f u e l fi l l e r fl a p i s c l o s e d
correctly.
r e m o v e t h e fi l l e r c a p C ,
fi l l t h e t a n k , b u t do not continue af-
ter the 3rd cut-off of the nozzle ;
this could cause malfunctions.
Low fuel level
Filling
A l a b e l , a f fi x e d o n t h e i n s i d e o f t h e fl a p ,
reminds you of the type of fuel to be
used according to your engine.
More than 5 litres of fuel must be add-
ed in order to be registered by the fuel
gauge. When the low fuel level is
reached, this indication ap-
pears on the instrument
p a n e l s c r e e n . W h e n i t fi r s t
comes on, approximately
10 litres of fuel remain.
The symbol fl a s h e s s l o w l y (approxi-
mately once per second).
When the symbol begins to
fl a s h r a p i d l y (approximately
twice per second), there is not
much fuel remaining in your tank
(approximately 5 litres).
Y o u m u s t fi l l t h e t a n k t o a v o i d
running out of fuel.
This symbol indicates that the
fuel tank cap is located on the
left-hand side of the vehicle.
Location of the cap
1. Opening.
2. Closing.
Capacity of the tank: approximately
60 litres.
Page 77 of 215
3
ACCESS
Quality of the fuel used for
petrol engines
The petrol engines are perfectly com-
patible with E10 type petrol biofuels
(containing 10 % ethanol), conforming
to European standards EN 228 and
EN 15376.
E85 type fuels (containing up to 85 %
ethanol) are reserved exclusively for ve-
hicles marketed for the use of this type
of fuel (BioFlex vehicles). The quality of
the ethanol must comply with European
standard EN 15293.
For Brazil only, special vehicles are
marketed to run on fuels containing up
to 100 % ethanol (E100 type). Quality of the fuel used for
Diesel engines
The Diesel engines are perfectly com-
patible with biofuels which conform to
current and future European standards
(Diesel fuel which complies with stan-
dard EN 590 mixed with a biofuel which
complies with standard EN 14214)
available at the pumps (containing up
to 7 % Fatty Acid Methyl Ester).
The B30 biofuel can be used in cer-
tain Diesel engines; however, this use
is subject to strict application of the
special servicing conditions. Consult a
PEUGEOT dealer.
The use of any other type of (bio)fuel
(vegetable or animal oils, pure or diluted,
domestic fuel...) is strictly prohibited
(risk of damage to the engine and fuel
system).