ECO mode Peugeot 406 2002.5 Owner's Manual

29-07-2002
TRADE NAMES OF APPROVED AND RECOMMENDED LUBRICANTS IN EUROPE(1)
PETROL
PETROL
24
(1) Minimum quality standard: Petrol engines ACEA A3 and API SH/SJ; Diesel engines ACEA B3 and API CF/CD ACEA= Association des Constructeurs Européens Automobiles (Association of Europ ean Automobile Manufacturers).
API = American Petroleum Institute If oil is used which does not con form to the ACEA A3B3 standards, this requires the "Arduous Condition s" servicing schedule to be followed, which involves shorter intervals between services.
*This Fuel Economy oil can only be used in engines designed f or its use (from 2000 Model Year).
Use only 5W40 oil for the 2.2 litre HDI engine.
Fuel economy oil cannot be used for the 2.2 litre 16V petrol engine.DIESEL DIESEL

29-07-2002
Display BThis enables the following information to be displayed:
– the time,
– the date,
– the outside temperature (the °C symbol flashes when there is a risk of ice),
– the radio displays,
– the status of the doors. The display shows you whether a doo r, the boot or the
bonnet is open and if the fuel filler cap is missing.
– the warning messages (e.g. ''battery low'') or information messa ges (e.g. "top
up fuel tank''), displayed temporarily, can be cleared by pressin g button 1or 2
– the trip computer.
Setting the parameters
Press button 1for two seconds to access the settings. The information flashes
to show it is ready to be modified.
Then, individual presses on button 1 allow you to scroll through the various data
in the following sequence:
– language in which the information is displayed,
– unit of distance (kms or miles),
– unit of temperature (Celsius or Fahrenheit),
– time format (12 then 24 hour mode)
– hour,
– minutes,
– year,
– month,
– day,
Pressing button 2allows you to change the information selected. Maintain the
pressure for rapid scrolling.
After ten seconds without action, the display returns to the ma in screen and the
modified data are recorded.
YOUR 406 IN DETAIL 135

YOUR 406 IN DETAIL63
Button
Function
A ON VOL Radio on/off. Adjustment of volume.
B RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
CTATraffic information priority on/off.
D Press fully: cassette rewind.
EPress fully: cassette fast forward.
D+ E   Press halfway: reversal of direction of play of the cassette.
  Press fully: ejection of the cassette.
F Increasing the bass/treble setting.
G Decreasing the bass/treble setting.
H AUDIO Adjustment of bass, treble, loudness and sound distribution.
I SRC Source selection: radio, cassette or CD changer.
Press for more than 2 seconds: CD shuffle.
J Automatic search of higher frequency.
Selection of next CD track.
K Automatic search of lower frequency.
Selection of previous CD track.
L MAN
Manual/automatic operation of buttons Iand Jin radio mode.
M BND Selection of FM1, FM2, FMast and AM wavebands.
ASTPress for more than 2 seconds: storing of a station in the memory (au tostore).
1 to 6 12 34 56 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a CD.
29-07-2002

29-07-2002
GENERAL FUNCTIONS
On / offWith the ignition key in the ACCESSORIES or IGNITION position , press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ign ition being switched on.
Antitheft system
The set is coded in such a way that it can operate only on yo ur vehicle. It would not function if fitted to another vehicle.
The antitheft system is automatic and requires no action on your part.
VOLUME SETTING
Adjusting the volume Turn button Ato increase or reduce the volume.
AUDIO SETTINGS Press the "AUDIO" button several times to access the bass (BASS), treble (TREB), loudness (LOUD), fader
(FAD) and balance (BAL).
Exit from audio mode is automatic after a few seconds without p ressing any button, or by pressing the
"AUDIO" button after adjusting the balance.
Note: bass and treble settings are specific to each source. It is possibl e to set them differently for radio, cas
sette or CD changer.
YOUR 406 IN DETAIL
64

29-07-2002
YOUR 406 IN DETAIL
68
RDS
Using the RDS (Radio Data System) function on FM Radio Data System allows you to continue listening to the sa me station, whatever frequency it is using for the
region you are going through.
Briefly press the " RDS" button to switch the function on or off.
RDS station following
The display indicates the name of the station selected. The radio is continually searching for the station which has the best
reception and which is transmitting the same programme.
Traffic information programme
Press the "TA" button to switch the function on or off.
Any traffic information flash will be given priority, whatever source you are listening to (radio, cassette or CD
changer).
If you wish to interrupt a message, press the " TA" button; this switches the function off.
Note: the volume of traffic information announcements is inde pendent of the volume of normal radio listening. You
can adjust it using the volume button. The setting will be stored and will be used when the next messages are
broadcast.
Regional following mode
When they are part of a network, certain stations broadcast regi onal programmes in the various areas they serve. With
regional following mode, you can keep listening to the same programme.
Press the " RDS" button for more than two seconds to switch the function on or off.

29-07-2002
YOUR 406 IN DETAIL69
CASSETTE
Selecting cassette mode When a cassette is inserted, the cassette player will start auto matically.
If a cassette is already inserted, press the " SRC" button until cassette mode is selected.
Ejecting the cassette
Fully press buttons Dand Eto eject the cassette from the player.
Direction of play The player will play sides 1 and 2 of the cassette alternate ly, by automatically reversing the direction of play
at the end of a side.
To manually reverse the direction of play, press buttons Dand Ehalfway.
Fast forward/rewind
Fully press button Dor Eto fast forward or rewind the cassette. At the end of the fa st forward/rewind, the set plays the cur
rent side.
Recommendations regarding the use of cassettes
Use good quality cassettes.
Do not use cassettes which play for more than 90 minutes.
Never expose the cassettes to heat or direct sunlight.
Retension the tape if necessary before inserting the cassette in the player.
Regularly clean the playing heads with a humid type cleani ng cassette.

29-07-2002
YOUR 406 IN DETAIL
70
CD CHANGER
Selecting CD changer mode Press the "SRC"button until CD changer mode is selected.
Selecting a disc Press buttons "1" to " 6" to select the corresponding disc.
Selecting a track Press button Jto select the next track.
Press button Kto return to the start of the current track or to select the previ ous
track.
Accelerated play
Press the " MAN" button.
Press and hold button Jor Kfor forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Buttons Jand Kresume the "track selection" function when the " MAN" button is pressed again.
Shuffle When the CD changer is selected, keep the " SRC" button pressed for two seconds. The tracks will be played
in random sequence. Pressing the " SRC" button again for two seconds returns you to normal play.

29-07-2002
ButtonFunction
A ON/VOL Radio on/off. Adjustment of volume.
B Radio selection. Selection of FM1, FM2, FMast and AM wavebands.
Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
C Cassette selection. Reversal of the direction of play of the cassette.
Press for more than 2 seconds: noise reduction.
D CD changer selection.
Press for more than 2 seconds: shuffle.
EEjection of the cassette.
FT ATraffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
G RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
H Increase bass/treble setting.
I Decrease bass/treble setting.
J AUDIO Adjustment of bass, treble, loudness ,sound distribution and
automatic volume correction.
K Automatic search of higher frequency.
Selection of next track cassette and CD.
L Automatic search of lower frequency.
Selection of previous track cassette and CD.
L MAN Manual/automatic operation of buttons Kand Lin radio mode.
1 to 6 12 34 56 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a CD.
YOUR 406 IN DETAIL 73

29-07-2002
GENERAL FUNCTIONS
On/offWith the ignition key in the ACCESSORIES or IGNITION position , press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ign ition being switched on.
Antitheft system
The audio system is coded in such a way that it can operate on ly on your vehicle. It would not function if fitted to another
vehicle.
The antitheft system is automatic and requires no action on your part.
VOLUME SETTING
Adjusting the volume Turn button Ato increase or decrease the volume.
AUDIO SETTINGS Press the "AUDIO" button several times to access the bass (BASS), treble(TREB), loudness (LOUD), fader
(FAD) , balance (BAL)and automatic volume correction (CAV).
Exit from audio mode is automatic after a few seconds without p ressing any button, or by pressing the
" AUDIO " button after configuration of the automatic volume correction .
Note: bass and treble settings are specific to each source. It is possibl e to set them differently for radio,
cassette or CD changer.
YOUR 406 IN DETAIL
74

Regional following modeWhen they are part of a network, certain stations broadcast regi onal programmes in the various areas they
serve. With regional following mode you can keep listening t o the same programme.
Press the " RDS" button for more than two seconds to switch the function on or off.
PTY function This allows you to listen to stations broadcasting a specific t ype of programme (news, culture, sport, rock
etc.).
With FM selected, press the " TA" button for two seconds to switch this function on or off.
To search for a PTYprogramme:
select the PTYfunction,
briefly press button Kor Lto scroll down the list of the various types of pro
grammes offered.
when the programme of your choice is displayed, keep button Kor Lpressed for two seconds to carry out an automatic
search (after an automatic search the PTYfunction is switched off).
In PTY mode the different types of programmes can be stored in the
memory. To do this, press the preselection buttons " 1" to " 6" for more
than two seconds.
To recall the type of programme stored in the memory, briefly press
the corresponding button.
EON system
This connects stations which are part of the same network. It en ables the broadcast of traffic information by a station, which
is part of the same network as the station to which you are li stening.
This service is available when you have selected the TA traffic i nformation programme or the PTYfunction.
YOUR 406 IN DETAIL 79
29-07-2002