6 - Head restraint height andangle adjustment Adjustment is correct when the top of the head restraint is levelwith the top of the head.
To raise the head restraint, pull it upwards.
To lower the head restraint, it isnecessary to push simultaneously:
Ð the button located on the left
guide on top of the seat back,
Ð the head restraint downwards. The head restraint has a frame with notches which prevent itfrom dropping down (safetydevice in case of impact).
To remove the head restraint, press the tab. 7 - Lumbar adjustment
To obtain better back support,turn the knob.
Passenger seat
To gain access to the rear seats, there are two ways to tilt the seatback:
Ð pull the handle at the top right of the seat, or
Ð lift the handle at the bottom left of the seat.
91
YOUR 406 COUPE IN DETAIL
SEATS Manual adjustment of the front seats
1 - Forwards-backwards adjust- ment Lift the lever and slide the seat forwards or backwards.
2 - Adjusting the seat cushion angle Lift the lever to set the best angle.
3 - Adjusting the driver's seat height Pull the telescopic handle for- wards and pivot it up or down.
4 - Adjusting the seat back angle Turn the knob to obtain the bestangle.
5 - Tilting the seat back To gain access to the rear seats,pull the handle, tilt the seat backas much as possible, and movethe seat forwards. On reposition-ing, the seat will resume its origi-nal settings.
Note: never reposition the seat
using the forwards-backwards adjustment control. Never drive with thehead restraints removed;they must be in placeand correctly adjusted.
01-07-2002
