seat adjustment Peugeot 508 2011 Owner's Manual

.
Contents
Instrument panel 20
Indicator and warning lamps 21
Gauges and indicators 31
Tr i p c o m p u t e r 3 6
Instruments and controlsFamiliarisation
Remote control key 39
Alarm 48
Electric windows 50
Boot 52
Motorised tailgate (SW) 53
Panoramic sunroof (SW) 56
Fuel tank 58
Diesel misfuel prevention 59
Access
Front seats 61
Rear seats 66
Mirrors 68
Steering wheel adjustment 70
Interior fi ttings 71
Boot fi ttings (Saloon) 74
Boot fi ttings (SW) 75
Heating and Ventilation 80
Manual air conditioning 82
Dual-zone digital air conditioning 84
Quad-zone digital air conditioning 87
Rear screen demist - defrost 92
Programmable Heating/ Ventilation 93
Comfort
Star ting-switching off the engine 94
Electric parking brake 96
Manual parking brake 103
Manual gearbox 104
Gear shift indicator 105
Automatic gearbox 106
6 -speed electronic gear control gearbox 110
Stop & Start 114
Hill start assist 117
Head-up display 118
Speed limiter 121
Cruise control 123
Parking sensors 125
Parking space sensors 127
Driving
Lighting controls 129
Automatic illumination of headlamps 134
Headlamp adjustment 137
Directional lighting 138
Wiper controls 140
Automatic rain sensitive wipers 142
Cour tesy lamps 144
Interior mood lighting 145
Visibility

.
9
Familiarisation
Sitting comfortably


Front seats


61




Manual adjustments



1.
Head restraint height and angle
adjustment.

2.
Backrest angle adjustment.

3.
Seat cushion height adjustment.

4.
Lumbar support adjustment.

5.
Seat forwards-backwards adjustment.


Electrical adjustment



1.
Angle, seat height and seat for wards-
backwards adjustment.

2.
Backrest angle adjustment.

3.
Lumbar support adjustment.

62




6.
Adjusting the cushion.

12
!
Familiarisation
Sitting comfortably


Head restraint adjustment


64



1.
Release the adjustment mechanism.

2.
Adjust for height and reach.

3.
Lock the adjustment mechanism.


Steering wheel adjustment


70

For reasons of safety, these operations
must only be carried out with the
vehicle stationary.

Heated seats control


0
: off.

1
: low.

2
: medium.

3
: high. To lower it, press button A
.
To raise it, guide the head restraint upwards to
the desired position.
To incline it, swivel the lower part backwards or
forwards.

64

.
13
i
Familiarisation
Sitting comfortably


Door mirrors


Adjustment



1.
Selection of the mirror.

2.
Adjusting the position of the mirror glass.

3.
Deselection of the mirror.

68



Other functions...

Folding/Unfolding.


Rear view mirror


Manual day/night type



1.
Selecting the "day" position of the rear view
mirror.

2.
Rear view mirror adjustment.



Automatic day/night type


70




1.
Automatic detection of day/night mode.

2.
Rear view mirror adjustment.

1.
Fitting the belt.

2.
Fastening.

3.
Check that the belt is correctly fastened by
pulling on the belt webbing.


Front seat belts


163

3
61
Comfort

















Front seats


Manual adjustments


1.
Adjustments to the height and angle of
the head restraint

To raise it, pull upwards.
To lower it, hold the button in and press on
the head restraint (pushing to go past the
stiff point of the button).

2.
Adjustment of the backrest angle

Operate the control lever and adjust the
position of the backrest to the front or to the
rear.

3.
Adjustment of the seat height

Raise or lower the control lever the number
of times required to obtain the desired
position.

4.
Adjustment of the lumbar suppor t

This system allows the height and depth of
the lumbar suppor t to be adjusted separately.


)
For wards or backwards to increase or
decrease the lumbar suppor t.

)
Upwards or downwards to raise or lower
the lumbar contact zone.

5.
Forwards-backwards adjustment of the
seat position

Lift the control bar and slide the seat
for wards or backwards.




6. Adjusting the cushion

Pull the handle to adjust the length of the
cushion.

62
i
Comfort








Electric adjustments


Switch on the ignition or star t the engine if the vehicle has gone into economy mode.

1.
Adjustment of the seat cushion angle
and height, and forwards-backwards
adjustment



)
Raise or lower the front of the control to
adjust the seat cushion angle.

)
Raise or lower the rear of the control to
raise or lower the seat.

)
Simultaneously raise or lower the front
and rear of the control in order to raise or
lower the entire seat.

2.
Adjustment of the backrest angle


Move the control for wards or backwards to
adjust the backrest angle.

3.
Adjustment of lumbar support


This function allows you to independently
adjust the height and level of lumbar
support.
The electric functions of the driver's seat are active for about a minute after opening the
front door. They are deactivated about a minute after switching off the ignition and in
economy mode.
To reactivate them, switch on the ignition.
Move the control:


)
For wards or backwards to increase or
reduce the lumbar suppor t.

)
Upwards or downwards to raise or lower
the lumbar suppor t zone.

3
63
Comfort











Storing driving positions

System which stores the electrical settings of
the driver's seat and door mirrors as well as
the head-up display settings. It enables you to
store up to two positions using the buttons on
the side of the driver's seat.

Storing a position
using buttons M/1/2



)
Switch on the ignition.

)
Adjust your seat, the door mirrors and the
head-up display.

)
Press button M
, then press button 1
or 2

within four seconds.
An audible signal indicates that the position
has been stored.
Storing a new position cancels the previous
position.


Recalling a stored position

Ignition on or engine running



)
Briefly press button 1
or 2
to recall the
corresponding position.
An audible signal indicates the end of the
adjustment.
You can interrupt the current movement by
pressing button M
, 1
or 2
or by using one of the
seat controls.
A stored position cannot be recalled while
driving.
Recalling stored positions is deactivated
45 seconds after switching off the ignition.








Welcome function

The welcome function assists entry and leaving
the vehicle.
After switching off the ignition and opening
the driver’s door, the seat moves back
automatically and then stays in this position,
ready for the next entry to the vehicle.
When switching on the ignition, the seat moves
for ward to the stored driving position.
When moving the seat, take care that no
person or object hinders the automatic
movement of the seat.
To activate or deactivate this function, contact
a PEUGEOT or a qualified workshop.

64
!
Comfort










Head restraint height and angle
adjustment


)
To lower the head restraint, press the lug A

and, going beyond the stiff point, guide the
head restraint downwards, then release the
button at the desired position.

)
To raise the head restraint, guide it
upwards to the desired position.

)
To adjust the angle of the head restraint, tilt
its lower part for wards or rear wards.

)
To remove the head restraint, press the two
lugs B
and pull the head restraint upwards.

)
To put the head restraint back in place, engage
the head restraint stems in the openings
keeping them in line with the seat back. Check
that it has engaged by pulling it upwards.

The head restraint is fitted with a
locking mechanism which prevents it
from lowering; this is a safety device in
case of impact.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.

Never drive with the head restraints
removed; they must be in place and
adjusted correctly.












Heated seats control

With the engine running, the front seats can be
heated separately.


)
Use the adjustment dial, placed on the
centre console, to switch on and select the
level of heating required:
0:

Off.

1

: Low.

2

: Medium.

3

: High.

3
87
Comfort





Quad-zone digital air conditioning
The air conditioning system operates when the engine is running.


Automatic operation


1. Automatic comfort programme

The Soft /Auto/Fast modes allow the driver
and front seat passenger to select their
desired comfor t settings for the passenger
compartment:

2. Activating/deactivating the
rear air conditioning
3 - 4. Driver-passenger side
adjustment
The driver and front passenger can each adjust
the temperature to their requirements.
The value indicated on the display corresponds
to a level of comfor t and not to a temperature in
degrees Celsius or Fahrenheit.
Favours optimum gentle and silent
operation by limiting the air flow.
Offers the best compromise between
thermal comfor t and silence of
operation.
Favours dynamic and effective air
flow. Press this button to deactivate the
rear air conditioning and lock the
system. A padlock appears in the
LCD screen. When the rear system
is reactivated, automatic mode is selected with
the last temperature settings used.

)
Turn control 3
or 4
to the left
(blue) or to the right (red)
respectively to decrease or
increase this value.
A setting around the value 21 provides
optimum comfor t. However, depending on
your requirements, a setting between 18 and
24 is normal.
It is recommended that the difference between
left and right should not be greater 3.

5
137
i
!
Visibility






Manual adjustment
of halogen
headlamps







Automatic adjustment of xenon headlamps


To avoid causing a nuisance to other road
users, the height of the halogen headlamps
should be adjusted according to the load in the
vehicle.

0.
1 or 2 people in the front seats.

-.
5 people.

1
Intermediate setting.
5 people + maximum authorised load in the
boot.

2
Driver + maximum authorised load in the
boot.

-
Not used.

3
Not used.
If a fault occurs, this
warning lamp is displayed
in the instrument panel,
accompanied by an audible signal and a
message in the instrument panel screen.
The system then places your headlamps in the
lowest position. In order to avoid causing a nuisance to other
road users, this system corrects the height of the
xenon headlamps beam automatically and when
stationary, in relation to the load in the vehicle.
If a fault occurs, do not touch the xenon
bulbs. Contact a PEUGEOT dealer or a
qualified workshop.


The initial setting is position "0"
.