maintenance Peugeot 607 Dag 2002 Owner's Manual

YOUR AT A GLANCE10
AUTOMATIC GEARBOX
'PORSCHE TIPTRONIC system'
The four speed automaticgearbox offers a choice between the comfort
of integral automatic operation, enhanced by a sport programme and
a snow programme, or the pleasure of manual gear changing.
Gear selection gate  Move the lever in the gate to select one of the functions.
Once the function is selected, the indicator light for that function is dis
played on the instrument panel screen.
S: sport programme.
: snow programme.
P ark: to immobilise the vehicle and to start the
engine, with the handbrake on or off.
R everse: to engage reverse; select this function
with the vehicle stationary and the engine at idle.
N eutral: to start the engine and to park, with the
handbrake on.
Note : if position Nis engaged by mistake while
the car is moving, allow the engine to return to
idling speed before engaging function Dto accel
erate.
D rive: for automatic gear changing
M anual: for manualgear changing.
To change the four gears manually:
 Push the lever to the + symbol to change up to
the next gear and pull it towards the symbol to
change down a gear.
Note: the S (sport) and
(snow) programmes do
not operate in manual mode.
Moving Off
With the engine running, to move
off from position P:
 it is essential to press the
brake pedal to exit position
P,
 select function R, D or M, then
gradually release the pressure
on the brake pedal; the vehi
cle will move off immediately.
You can also move off from posi
tion N:
 release the handbrake, with
your foot on the brake,
 select function R, D or M, then
gradually release the pressure
on the brake pedal; the vehi
cle will move off immediately.
WARNING
When the engine is idling with
the brakes not applied, if function
R , D or M is selected, the vehicle
moves without the accelerator
being pressed.
For this reason, do not leave
children unsupervised inside
the vehicle, with the engine
running.
When maintenance operations
have to be carried out with the
engine running, apply the hand
brake and select posi
tion P.
122

PEUGEOT SERVICING
The maintenance cycle of your 607 is based on level A(including the replacement of the engine oil, the oil fi lter and a
set of checks) and level Cservices [service level A+ workshop operations carried out every 40,000 miles (60 000 km)] in
accordance with the tables on the following pages.
So that the driving conditions and your style of driving may be taken into account, your 607 is fitted with a service indica
tor which programmes the intervals for the level A servic e:
• every 20,000 miles (30 000 km) maximum or 2 years for petrol engines,
• every 12,000 miles (20 000 km) maximum or 2 years for direct injection diesel engines,
The frequency of level Aservices specific to your vehicle will be determined by three elemen ts:
• the number of engine revolutions,
• the engine oil temperature,
• prolonged periods of the vehicle not being used.
Depending on these elements, the service indicator will suggest a time which is more or less the same as the initia l plan.
Depending on the conditions of use, one or more level Aservices can be carried out between two level C services.
Depending on the mileage recorded, your dealer may offer to ca rry out the level Cservice to avoid the visits being too close
together.
PEUGEOT SERVICING
18

The extension of the service intervals means that the engine oil level must be checked regularly: topping up of the
oil between two oil changes is normal.
It is for this reason that your Peugeot dealer will invite you to an intermediate visit between services. The date o f
this visit is not shown by the service indicator.
It is to be carried out between two services.
A Peugeot professional will carry out a quick check and will top up the levels if necessary (oil, coolant, screen wash up to
2 litres).
If the oil level is too low, there is a risk of significa nt damage to the engine: check the engine oil level at le ast every
3,000 miles (5 000 km).
This maintenance frequency is the result of developments to our vehicles and to the lubricants:
THUS IT IS ESSENTIAL THAT YOU ONLY USE ENGINE LUBRICANTS THAT ARE APPROVED AND RECOMMENDED
BY THE MANUFACTURER (see pages on 'Lubricants').
PEUGEOT SERVICING 19

PEUGEOT SERVICING 21
Zero reset
Your Peugeot dealer carries out this
operation after each service. Howev
er, if you carry out the service your
self, the reset procedure is as fol
lows: 
Switch off the ignition,
 Press and hold the trip recorder
reset button,
 Switch on the ignition.
The display begins a countdown.
When the display shows 0, release
the button; the service symbol disap
pears.
Important: after this operation, if
you wish to disconnect the battery,
lock the vehicle and wait for at least
five minutes, otherwise the zero re
set will not be registered.MAINTENANCE OF PARTS SUBJECT TO WEAR AND A CHECK OF CON
SUMABLES
Certain essential components on your vehicle are subject to checks a t specific
frequencies.
•The brake fluid is to be replaced at a maximum of every 36,000/40,000 miles
(60 000km) or every two years;
•The pollen filter must be checked at each serviceby a PEUGEOT dealer
(services and intermediate visits) or more often, depending on the environ
ment (dust, pollution, etc.);
•For HDI turbo diesel engines with particulate emission filter , maintenance
of the filterand topping up of the additive reservoirmust be carried out
every 48,000 miles (80 000 km) by a PEUGEOT dealer;
• Replacement of the timing belt: contact a PEUGEOT dealer.
• Air bags and pretensioning parts on seat belts must be replaced every
10 years.
• Tyre pressure sensors are to be replaced every 10 years.
• The check on tyre inflation presure must be carried out cold at least once a
month.

PEUGEOT SERVICING
22
THE SERVICE LEVELS
Each vehicle has its own servicing cycle, defined by th
e manufacturer in terms of its technical specification.
This cycle consists of alternating 2 types of service A and C, inte rmediate visits and a few additional operations specific to
your vehicle; these correspond to key stages in the life of your 6 07.
At your first and each subsequent service, your dealer will advise you of the type and content of the next service
due.
Intermediate topup
visit.
MAINTENANCE CYCLE FOR YOUR PETROL ENGINE 607
2 litre 16 V and 2.2 litre 16V petrol engines : service e very 2 years or 20,000 miles (30 000 km) maximum (unless the
service indicator shows it is required before this)
1st service at 6,000 miles
(10 000 km) or 6 months*.
This is necessary in order to benefit from the warranty.
MILES (KM) 40,000 (60 000) 80,000 (120 000) 120,000 (180 000)
injection engine: service every 2 years or 20,000 mil es (30 000 km) maximum (unless the service indicator shows it is
required before this)
1st service at 6,000 miles
(10 000 km) or 6 months*.
This is necessary in order to benefit from the warranty.
MILES (KM) 40,000 (60 000) 80,000 (120 000) 120,000 (180 000)
Automatic gearbox oil level every 40,000 miles (60 000 km).
Replacement of brake fluidevery 2 years or 40,000 miles (60 000 km)
These fixed operations are carried out with synthetically based oil. Fuel economy oil
or synthetic oil may also be used (except for the 2.2 litre 16 V petrol engine).
+ replacement of air filter
+ replacement of
24V V6 petrol
+ replacement of air filter + replacement of fuel filterfuel filter
* Whichever comes first.

PEUGEOT SERVICING 23
Intermediate topup
visit.
MAINTENANCE CYCLE FOR YOUR 607 TURBO DIESEL HDI
Turbo diesel HDI: service every 2 years or 12,000 mi les (20 000 km) (unless the service indicator shows it is required
before this).
1st service
at 6,000 miles (10 000 km) or 6 months*.
This is necessary in
order to benefit from the warranty.
MILES (KM) 36,000 (60 000)
72,000 (120 000) 108,000 (180 000)
+ maintenance of particu
late emission filter at
48,000 miles (80 000 km)
+ maintenance of
particulate emission filter at 96,000 miles
(160 000 km)
Automatic gearbox oil every 36,000 miles (60 000 km).
Replacement of brake fluidevery 2 years or 36,000 miles (60 000 km).
These fixed operations are carried out:
– with synthetically based oil, Fuel Economy oil or synthetic oil ;
– with 5W 40 oil for Turbo Diesel HDI engines fitted with a particulate emi ssion filter.
* Whichever comes first.

27
Recommendation for
approved lubricants
The oils which appear in the table
opposite are suitable for most pur
poses.
The diagram opposite states the
optimum range of viscosity depend
ing on the temperatures at which the
oils are to be used.
It is also possible to use synthetic
oils of 'superior quality'.
In the absence of semisynthetic or
synthetic oils, oils of API SH/SJ qual
ity (for petrol engines) or CD/CF
quality (for diesel engines) can be
used by following the 'Arduous con
ditions' servicing schedule, which
specifies shorter intervals.
Do not hesitate to ask for advice
from a PEUGEOT dealer to maintain
driving pleasure and to minimise the
maintenance cost of your vehicle.
For countries outside Europe, please
contact a local PEUGEOT dealer.
TOTAL
ONLY ONLY
Manual ESSO GEAR OIL BV TOTAL TRANSMISSION BV
gearbox 75W 80 Part no. 9736.41 75W 80
Automatic ONLY
gearbox ATF 4HP20AL4
4HP20 Part no. 9736.22
Power steering ESSO ATF D TOTAL FLUIDE AT42 Part no. 9730.94
Power steering FLUIDE DA Part no. 9730. A1*
Brake fluid PEUGEOT DOT 4
Coolant PROCORTM108/GLYSANTIN G33 or REVKOGEL 2000 ONLY.Protection to 35°C
*Only in very cold climates. Other approved products
PEUGEOT SERVICING

110
Screenwash/headlamp wash lowWhen the minimum level of
the reservoir is reached,
this warning light comes on,
accompanied by an audible
signal and the message
'Screenwash low' on the multi
function display.
Next time you stop, fill the screen
wash / headlamp wash reservoir.
If the reservoir is empty, the warning
light comes on when the ignition is
switched on, or every time the stalk
is operated, until the reservoir is
filled.
YOUR 607 IN DETAIL
WINDSCREEN
WIPER STALK
Windscreen wipers
3 Fast wipe
2 Normal wipe
1 Intermittent or automatic wipe
0 Off
When the ignition has been
switched off for more than a
minute with the control in a wipe
position (1, 2 or 3), it is necesary
to reactivate this function. To d o
this, move the stalk to any position,
then move it back to the required
position. Windscreen and headlamp wash
Pull the windscreen wiper stalk
towards you.
The windscreen wash then the wind
screen wipers operate for a fixed
period. The windscreen wash and
headlamp wash operate simultane
ously for a few seconds,
only if the
dipped beam or main beam head
lamps are on. Do not cover the rain
sensor located on the
windscreen behind the
interior mirror.
When using an automat
ic car wash, switch off the ignition
or check that the wiper stalk is not
in the automatic position.
In winter, it is advisable to wait
until the windscreen is completely
free of ice before operating the
automatic wipe.
Maintenance position
This position enables the wiper
blade to be removed.
In the minute following switching off
of the ignition, any action on the stalk
positions the wipers in the centre of
the windscreen so that they may be
cleaned or replaced.
To park the wipers after this has
been done, switch on the ignition
and operate the stalk.

YOUR 607 IN DETAIL
122
The
four speed automatic gearbox offers a choice between the comfort of inte
gral automatic operation , enhanced by a sportand a snow programme, or the
pleasure of manual gear changing .
Gear selection gate  Move the lever in the gate to select a function.
Once the function is selected, the corresponding indicator lig ht appears on the
instrument panel screen.
S: sport programme.
: snow programme.
P ark: to immobilise the vehicle and to start the
engine , with the handbrake on or off.
R everse: to reverse(select this function with the vehi
cle stationary, engine at idle).
N eutral: to start the engine and to park, with the hand
brake on.
Note: if position Nis inadvertently engaged while dri
ving, allow the engine to return to idle before engagin g
function Dto accelerate.
D rive: for driving in automatic mode.
M anual: for drivingin manual mode.
PORSCHE TIPTRONIC system' AUTOMATIC GEARBOX Moving Off
With the engine running, to move off
from position
P:
 it is essential to press the brake
pedal to exit position P,
 select function R, D or M, then
gradually release the pressure on
the brake pedal; the vehicle
moves off immediately.
You can also move off from position N:
 release the handbrake, with your
foot on the brake,
 select function R, D or M, then
gradually release the pressure on
the brake pedal; the vehicle
moves off immediately.
WARNING
When the engine is at idle, brakes not
applied, if function R, D or Mis select
ed, the vehicle moves even without
the accelerator being pressed. For
this reason, do not leave children
unsupervised inside the vehicle,
with the engine running.
When maintenance operations need
to be carried out with the engine run
ning, apply the handbrake and select
position P.

Aflat battery prevents
the engine from starting.
PRACTICAL INFORMATION
150
CHANGING A WINDSCREEN
WIPER BLADE
Placing the wiper blades in the
maintenance position
 Less than one minute after switch
ing off the ignition, activate the
windscreen wiper stalk to position
the blades in the centre of the
windscreen (maintenance posi
tion).
Replacing a blade  Lift the arm, then unclip the blade
and remove it.
 Fit the new blade and fold down
the arm.
To park the blades, switch on the
ignition and operate the wind
screen wiper stalk.
ECONOMY MODE FUNCTION
After the engine has stopped, certain
functions (windscreen wiper, electric
windows, sunroof, rear electric blind,
electric seats, audio equipment, tele
phone etc) can only be used for thir
ty minutes, to prevent discharging
the battery.
Once the thirty minutes are over, the
message "Economy mode active"
appears on the multi–function dis
play and the active functions are put
on standby.
REMOVING A MAT
When removing a mat on the driver's
or passenger's side, push back the
seat as far as possible and remove
the clips.
To remove a rear mat, push the cor
responding front seat forward and
remove the clip.
On refitting, position the mat and
press firmly to refit the securing clips.
LOAD REDUCTION
When driving, certain functions
(heated rear screen, heating system
for passenger compartment of diesel
vehicles, etc.) may be switched off
temporarily, depending on the level
of battery charge.
Reactivation of the functions on
standby is automatic, as soon as the
battery permits.
These functions are automatically
reactivated next time the vehicle is
driven.
Note:
if the telephone is being used
when economy mode starts, it will
still be possible to finish the call.