light Peugeot 607 Dag 2009 Owner's Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2009, Model line: 607 Dag, Model: Peugeot 607 Dag 2009Pages: 182, PDF Size: 10.7 MB
Page 32 of 182
1
32
Trip recorder zero reset button
Lighting rheostat button
With the ignition on, press the button
until the zeros appear.
With the headlamps on, press button B to
increase the brightness of the lighting of
the instruments and controls or button A to
reduce it.
As soon as the lighting reaches the required
l e v e l o f b r i g h t n e s s , r e l e a s e t h e b u t t o n .
7 seconds after the ignition is switched
on, the total distance recorder resumes
normal operation and the spanner re-
mains lit. The display shows the total
and trip distances.
Note: the spanner may also be lit if the
t w o - y e a r i n t e r v a l h a s b e e n e x c e e d e d .
Service indicator zero re-set
The service is overdue.
Each time the ignition is switched on
and for 7 seconds, the spanner and
t h e e x c e s s d i s t a n c e fl a s h .
Example: t h e s e r v i c e i s o v e r d u e b y
3 0 0 m i l e s / k m . T h e s e r v i c e s h o u l d b e
c a r r i e d o u t v e r y s h o r t l y .
When the ignition is switched on and
for 7 seconds, the display shows:
Your PEUGEOT dealer carries out this
o p e r a t i o n a f t e r e a c h s e r v i c e .
H o w e v e r , i f y o u c a r r y o u t t h e s e r v i c e
yourself, the re-set procedure is as fol-
lows:
Switch off the ignition,
Press and hold the trip recorder re-
set button,
Switch on the ignition.
The display begins a countdown.
When the display shows "=0" , release
the button; the spanner disappears.
After this operation, if you wish
to disconnect the battery, lock
t h e v e h i c l e a n d w a i t f o r a t l e a s t
fi v e m i n u t e s , o t h e r w i s e t h e z e r o
re-set will not be registered.
Page 36 of 182
2
36
DT COLOUR AND MAP
SCREEN
This displays the following informa-
tion, via the PC Com control pad:
- the time,
- the date,
- the exterior temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k
of ice),
- t h e a c c e s s e s c h e c k ,
- the vehicle functions warning or status messages, displayed tem-
porarily,
- the audio sources displays,
- the telematic systems displays (telephone, services, ...),
- the trip computer displays,
- t h e c o n fi g u r a t i o n d i s p l a y s ,
- the satellite navigation system dis- plays. Management of the displays
The
"AUDIO" , "NAV" , "TRIP" and
"TEL" buttons on the PC Com control
pad permit displaying in the main win-
dow. E x a m p l e : " C o n fi g u r a t i o n "
" C o n fi g u r a t i o n " m e n u
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
G e n e r a l m e n u
Press the
"MENU" button to gain
access to the g e n e r a l m e n u and
select one of the following functions:
- "Navigation-Guidance",
- "Audio functions",
- "Trip computer",
- " C o n fi g u r a t i o n " ,
- "Directory",
- "Telematics",
- "Map",
- "Video". This provides access to successive
c o n fi r m a t i o n w i n d o w s .
Example: "TRIP"
Page 40 of 182
3
40
AUTOMATIC AIR CONDITIONING (DUAL ZONE)
Press the "AUTO" button(s).
Note: when the visibility programme 9
or the air intake/recirculation 10 is se-
lected, the passenger's "AUTO" but-
ton is deactivated; the indicator light
o f t h e c o r r e s p o n d i n g b u t t o n fl a s h e s
temporarily.
3 - Adjustment of the driver's
temperature
4 - Adjustment of the passenger
temperature
Press the up or down
arrow to change the
temperature on the driv-
er's side 3 or passenger
side 4 .
The system is automatically set to the
value required.
Depending on the level of comfort se-
lected, the system controls the air dis-
t r i b u t i o n , fl o w , t e m p e r a t u r e a n d i n t a k e
of air in order to guarantee comfort
and an adequate circulation of air in
the passenger compartment. You do
not have to make any adjustments.
The "AUTO" symbol is displayed.
Dual zone: this is the differentiated
regulation of the temperature and air
distribution on the driver's side and the
front passenger side.
The driver and his front passenger can
each adjust the temperature and the
distribution of the air to suit their re-
quirements.
1 - Driver's automatic comfort
programme
2 - Passenger automatic comfort
programme
This is the usual air conditioning system
operating mode.
When the engine is cold, to
prevent too great a distribu-
t i o n o f c o l d a i r , t h e a i r fl o w w i l l
only reach its optimum level
progressively. On entering the vehicle, the
interior temperature may be
much colder (or warmer) than
is comfortable. There is no
need to change the temperature dis-
played in order to obtain rapidly the
level of comfort required.
The automatic regulation of the air con-
ditioning will use its maximum perform-
ance settings to correct the temperature
difference as quickly as possible.
The value indicated on the display cor-
responds to a level of comfort and not
to a temperature in degrees Celsius or
Fahrenheit, depending on the choice of
c o n fi g u r a t i o n v a l i d a t e d o n t h e d i s p l a y .
A setting around the
value 21 makes
it possible to obtain optimum comfort.
H o w e v e r , d e p e n d i n g o n y o u r r e q u i r e -
ments, a setting between 18 and 24
is usual.
Page 41 of 182
3
41
To limit the discomfort resulting from use of the manual controls, we recommend
the following settings:
Control via the manual controls
It is possible to adjust one or more
functions manually while leaving the
other functions in automatic mode.
The
"AUTO" button indicator light is
switched off.
Switching to manual mode may result
in discomfort (temperature, humidity,
odour, condensation) and is not ad-
vantageous for comfort.
To return to automatic mode, press the
"AUTO" button.
Exterior
temperatures
Air
distribution
Positions of
the vents (3) and (4)
Comfort in the
rear seats
Blower
(minimum)
Low
Vents closed. - Increase the
blower air
fl o w .
- Close the centre vents.
Average Four vents
open.
High Four vents
open. - Open the
vents.
- Increase the blower air
fl o w .
Page 42 of 182
3
42
9 - A u t o m a t i c v i s i b i l i t y p r o g r a m m e
In certain cases, the comfort
programme may not be suf-
fi c i e n t t o d e m i s t o r d e - i c e t h e
windows (humidity, several
passengers, ice).
In this case, select the visibility pro-
gramme and open the side vents in
order to clear the windows quickly.
It controls the air conditioning, air
fl o w a n d i n t a k e a n d d i s t r i b u t e s t h e
ventilation to the windscreen and
side windows.
The symbols "A/C" , "AUTO" and air
fl o w ( f a n ) a r e d i s p l a y e d .
Once the inconvenience has been
eliminated, pressing button 1 or 2 re-
turns the system to the comfort setting.
Press the OFF button.
7 - Adjustment of the driver's air
distribution
8 - Adjustment of the passenger air
distribution
Successive presses of these buttons
e n a b l e y o u t o d i r e c t t h e fl o w o f a i r o n
the driver's side or on the passenger
side alternately towards:
- the windscreen and footwells,
- the footwells,
- the centre vent, side vent and foot- wells,
- the centre vent and side vent,
- the windscreen.
6 - Deactivation of the air
conditioning (OFF)
5 - B l o w e r a n d a i r fl o w
Press buttons "+"
and "-" respectively
to increase or de-
c r e a s e t h e a i r fl o w .
T h e a i r fl o w s y m b o l ( f a n ) i s fi l l e d i n i n
relation to the value required.
To prevent condensation and dete-
rioration of the quality of the air in the
passenger compartment, ensure that
a n a d e q u a t e fl o w o f a i r i s m a i n t a i n e d .
This action switches off the display and
the indicator lights and deactivates all
of the functions of the system, with the
exception of the rear screen demisting.
The temperature-related comfort is no
longer controlled (temperature, humidity,
condensation).
Avoid driving for too long with the air
conditioning deactivated.
Pressing this button again or but-
tons 5 , 7 or 8 or one of the two
"AUTO" buttons reactivates the
system with the values set before
it was switched off.
Page 43 of 182
3
43
10 - Intake of exterior air/
Recirculation of interior air
This function enables you to
isolate the passenger com-
partment from exterior fumes
and odours.
11 - Rear screen and mirrors
demisting
Press this button, with the
engine running, to demist
the rear screen and the
exterior mirrors. The indi-
cator light comes on.
Demisting is switched off automatical-
ly to avoid an excessive consumption
of current and in relation to the exterior
temperature.
It may be stopped by pressing this
button again or when the engine is
switched off.
H o w e v e r , t h e d e m i s t i n g r e s u m e s i f t h e
engine is switched on again within one
minute.
Switch off the rear screen and exterior
mirrors demisting when you consider
this necessary as low current con-
sumption reduces fuel consumption.
12 - Air conditioning On/Off (A/C)
The deactivation of this func-
tion may result in tempera-
ture, humidity, odour and
smoke discomfort.
Press this button to switch off the
air conditioning.
The symbol "A/C" is switched off.
Press this button again to return to
automatic operation of the air con-
ditioning.
The symbol "A/C" is displayed.
Press this button to set the air
intake mode, the indicator light
comes on in recirculation mode.
Prolonged operation in interior air
recirculation mode may result in
the formation of condensation and
deterioration of the quality of the
interior air.
Do not drive in air recirculation mode for prolonged periods, except
in truly exceptional atmospheric
conditions.
The message associated with the control is displayed on the multi-
function display.
Press this button again to return to
automatic control of the air intake.
F o r y o u r c o m f o r t , w h e n t h e i g n i -
tion is switched off, the settings are
stored until it is switched on again.
Page 45 of 182
3
45
A u t o m a t i c d a y / n i g h t i n t e r i o r mirror Operation
Switch on the ignition and press switch 1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mirror
clears automatically when re-
verse gear is engaged.
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .
Adjust the height and depth of the
steering wheel.
Lock by pulling handle A fully.
Page 46 of 182
3
45
A u t o m a t i c d a y / n i g h t i n t e r i o r mirror Operation
Switch on the ignition and press switch 1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mirror
clears automatically when re-
verse gear is engaged.
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .
Adjust the height and depth of the
steering wheel.
Lock by pulling handle A fully.
Page 59 of 182
4
56
Unlocking, opening and stopping of the boot Deadlocking
T h i s r e n d e r s t h e e x t e r n a l a n d internal
d o o r c o n t r o l s i n o p e r a t i v e .
It also deactivates the internal central
l o c k i n g b u t t o n .
Pressing button B p e r m i t s c o m -
plete locking of the vehicle or
pressing button B for more than
2 seconds p e r m i t s a u t o m a t i c c l o s -
i n g o f t h e w i n d o w s a n d s u n r o o f i n
a d d i t i o n t o l o c k i n g .
W i t h i n fi v e s e c o n d s , a second
press permits deadlocking of the
v e h i c l e .
T h i s f u n c t i o n c a n b e c o n -
fi g u r e d b y m e a n s o f a p a r a -
meter, via the multifunction
display "Personalisation-
C o n fi g u r a t i o n " m e n u . E a c h a c t i o n i s c o n fi r m e d b y
fi x e d l i g h t i n g o f t h e d i r e c t i o n
i n d i c a t o r s f o r a p p r o x i m a t e l y
t w o s e c o n d s .
Key in ignition
A b u z z e r s o u n d s o n o p e n i n g t h e d r i v -
er's door, if the key has been left in the
i g n i t i o n .
Locating your vehicle
To locate your vehicle, if you have
locked it, in a car park:
press button B , the courtesy lights
c o m e o n a n d t h e d i r e c t i o n i n d i c a -
t o r s fl a s h f o r a f e w s e c o n d s .
If the permanent locking of the
boot is activated, unlocking is
only possible via button D on
t h e r e m o t e c o n t r o l .
Press button D to unlock and open
t h e b o o t .
T h i s a c t i o n a l s o u n l o c k s t h e d o o r s .
Press button D again to stop the
m o v e m e n t o f t h e b o o t i n a n i n t e r -
m e d i a t e p o s i t i o n .
Page 64 of 182
4
59
ALARM Setting the alarm
S w i t c h o f f t h e i g n i t i o n a n d g e t o u t
o f t h e v e h i c l e .
S e t t h e a l a r m b y l o c k i n g o r d e a d -
locking using the remote control
(button A i n d i c a t o r l i g h t fl a s h e s
o n c e p e r s e c o n d ) .
When the alarm is triggered, the siren
sounds and the direction indicators
fl a s h f o r t h i r t y s e c o n d s .
T h e a l a r m r e m a i n s s e t f o l l o w i n g e a c h
t r i g g e r i n g i n c i d e n t .
U n l o c k t h e v e h i c l e w i t h t h e r e m o t e
control key (button B indicator light
g o e s o u t ) .
Note: if the alarm has been triggered
w h i l e y o u w e r e a w a y f r o m y o u r c a r , t h e
r a p i d fl a s h i n g o f t h e i n d i c a t o r l i g h t w i l l
s t o p w h e n y o u s w i t c h o n t h e i g n i t i o n .
Automatic activation *
The alarm is activated automatically
t w o m i n u t e s a f t e r t h e l a s t c l o s i n g o f a
d o o r o r t h e b o o t .
In order to avoid accidental triggering
o f t h e a l a r m w h e n a d o o r o r t h e b o o t
is opened, it is essential to press the
r e m o t e c o n t r o l o p e n i n g b u t t o n fi r s t .
* A c c o r d i n g t o c o u n t r y .
T h i s p r o v i d e s t w o t y p e s o f p r o t e c t i o n :
-
exterior protection , it sounds if
a door, the boot or the bonnet is
o p e n e d .
- interior protection , it sounds if
the sensors detect a variation in
t h e a i r m o v e m e n t i n s i d e t h e v e -
h i c l e ( b r e a k i n g o f a w i n d o w o r a
m o v e m e n t i n s i d e t h e v e h i c l e ) .
Warning: if the alarm has
been triggered ten times in
succession, on the eleventh
t i m e i t b e c o m e s i n a c t i v e .
Note: if button A fl a s h e s r a p i d l y , t h e
a l a r m h a s b e e n t r i g g e r e d w h i l e y o u
w e r e a w a y f r o m y o u r v e h i c l e .
I f y o u w i s h t o l o c k y o u r v e h i c l e w i t h o u t
s e t t i n g t h e a l a r m , u s e t h e d o o r l o c k .