driver seat adjustment Peugeot 607 Dag 2009 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2009, Model line: 607 Dag, Model: Peugeot 607 Dag 2009Pages: 182, PDF Size: 10.7 MB
Page 4 of 182
9. Deactivation of the interior alarm.
Deactivation of the ESP/ASR system.
10. Adjustable and closing side vent.
11. Driver's side window de-icing and
demisting vent.
12. Driver's seat electric controls.
13. Driver's heated seat control.
14. Bonnet release.
15. Deactivation of the parking assistance.
SPORT suspension control.
Sunroof control.
Rear blind control.
16. Armrest with storage compartment.
17. Rear ashtray.
18. Rear lighter (100 W max.).
19. Rear heated seat controls.
1. Cruise control/speed limiter switches.
2. Steering wheel height and depth
adjustment.
3. Lights and direction indicators
controls.
4. Instrument panel.
5. Driver's air bag.
Horn.
6. Gear lever.
7. Driver's footwell air outlet.
8. Fascia fuse box.
Page 9 of 182
Front seat belts
61
Electric window controls
1. Driver's electric window control.
2. Passenger electric window control.
3. Rear right electric window control.
4. Rear left electric window control.
Also...
5. Deactivation of the electric
window controls located in
the rear (child safety).
80
1. Fastening.
2. Height adjustment.
Mirrors with automatic tilting in reverse gear
Initial setting of the function
(memorisation)
With the engine running, engage
reverse gear.
Select and adjust the left and right
mirrors in succession using button B .
44
Tilting the mirror to the parking
position (use)
Turn control B to the right or to the
left, then engage reverse gear.
Returning the mirror to the normal
position
Exit reverse gear or place button B
i n t h e c e n t r a l p o s i t i o n "
Page 47 of 182
3
46
FRONT SEATS
B - Seat cushion angle adjustment C - Seat height adjustment
A - Forwards-backwards
adjustment
Push the control forwards or back-
wards to slide the seat. Tilt the front of the control upwards or
downwards to obtain the required angle.
Tilt the rear part of the control upwards
or downwards to obtain the required
height.
Electric front seats
The electric functions of the
driver's seat are deactivated
one minute after the ignition is
switched off.
The operation of the electric
seats will be deactivated tem-
porarily if the energy economy
mode is activated.
Page 49 of 182
3
48
Memorising driving and mirror positions
Memorising using the controls on
the driver's door
To memorise:
Place the key in the ignition on po-
sition,
Adjust your seat and mirrors,
Press button M , then button 1 " fi r s t
driving position" or button 2 "sec-
ond driving position" within four
seconds.
A n a u d i b l e s i g n a l c o n fi r m s t h a t a p o s i t i o n
has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
I g n i t i o n o n , v e h i c l e s t a t i o n a r y
B r i e fl y p r e s s b u t t o n 1 or 2 to recall
the corresponding memorised po-
sition. The end of the setting is in-
dicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
G - Heated seats adjustment
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0
: Off.
1
: Low.
2
: Medium.
3
: H i g h . The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons
M/1 and M/2 . Vehicle moving
Keep button 1 or 2 pressed down
until the bleep indicates that set-
ting of the corresponding memo-
rised position is complete.
Page 50 of 182
3
48
Memorising driving and mirror positions
Memorising using the controls on
the driver's door
To memorise:
Place the key in the ignition on po-
sition,
Adjust your seat and mirrors,
Press button M , then button 1 " fi r s t
driving position" or button 2 "sec-
ond driving position" within four
seconds.
A n a u d i b l e s i g n a l c o n fi r m s t h a t a p o s i t i o n
has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
I g n i t i o n o n , v e h i c l e s t a t i o n a r y
B r i e fl y p r e s s b u t t o n 1 or 2 to recall
the corresponding memorised po-
sition. The end of the setting is in-
dicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
G - Heated seats adjustment
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0
: Off.
1
: Low.
2
: Medium.
3
: H i g h . The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons
M/1 and M/2 . Vehicle moving
Keep button 1 or 2 pressed down
until the bleep indicates that set-
ting of the corresponding memo-
rised position is complete.
Page 92 of 182
7
80
SEAT BELTS
T h e r e a r s e a t s a r e a l l fi t t e d w i t h a
three-point inertia reel seat belt with
force limiter.
Safety in the event of a frontal
impact has been improved by
the introduction of seat belts
with pre-tensioner and force
limiter connected to the front air bags.
Depending on the seriousness of the
impact, the pre-tensioning system in-
s t a n t l y t i g h t e n s t h e s e a t b e l t s fi r m l y
against the bodies of the occupants.
The pre-tensioning seat belts are
armed when the ignition is on.
The force limiter reduces the pressure
of the seat belt on the body of the oc-
cupant in the event of an accident.
With the vehicle sta-
tionary, when the
ignition is switched
on, the warning light
comes on if the driver
and/or the front pas-
senger has not fas-
tened his seat belt.
Front seat belts with pre-tensioner
and force limiter Front seat belt not fastened/
unfastened warning
Front seat belt height adjustment
To lower the attachment point,
squeeze control 1 and slide it
downwards.
To raise the attachment point, slide
control 1 upwards.
Rear seat belts
To lock the seat belts
Pull the strap, then insert the end
into the buckle.
Check that it is fastened correctly
by pulling the strap.
To unlock the seat belts
Press the red button on the buckle,
then remove the end. Seat belt warning light
Before moving off, the driver
must ensure that all passen-
gers have fastened and use
the seat belts correctly.
When the vehicle is station-
ary, ignition on, if the driver
and/or the front passenger has
not fastened his seat belt, the
warning light on the instrument
panel comes on, then from approximately
12 mph (20 km/h) and for two minutes, this
w a r n i n g l i g h t fl a s h e s a c c o m p a n i e d b y a n
audible signal which increases in volume.
Once these two minutes have elapsed, the
warning light remains on until the driver or
front passenger fastens his seat belt.
This warning light is always accompanied
by a message on the multifunction display.
When the vehicle is moving, the warning
light comes on if the driver or front pas-
senger unfastens his seat belt.
Note: a bag or a pet placed on the front
passenger seat may trigger the lighting of
this warning light.