mirror Peugeot 607 Dag 2009 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2009, Model line: 607 Dag, Model: Peugeot 607 Dag 2009Pages: 182, PDF Size: 10.7 MB
Page 8 of 182
Electric mirror adjustment Steering wheel adjustment
44 45
A. Steering wheel height and depth
adjustment locking and release
control.
1. Locked position.
2. Released position.
B. Exterior mirrors selection, adjustment
and folding control.
1. Selection of the driver's mirror.
2. C e n t r a l p o s i t i o n "
Page 9 of 182
Front seat belts
61
Electric window controls
1. Driver's electric window control.
2. Passenger electric window control.
3. Rear right electric window control.
4. Rear left electric window control.
Also...
5. Deactivation of the electric
window controls located in
the rear (child safety).
80
1. Fastening.
2. Height adjustment.
Mirrors with automatic tilting in reverse gear
Initial setting of the function
(memorisation)
With the engine running, engage
reverse gear.
Select and adjust the left and right
mirrors in succession using button B .
44
Tilting the mirror to the parking
position (use)
Turn control B to the right or to the
left, then engage reverse gear.
Returning the mirror to the normal
position
Exit reverse gear or place button B
i n t h e c e n t r a l p o s i t i o n "
Page 11 of 182
1. Driver's automatic comfort
programme.
2. Passenger automatic
comfort programme.
3. Driver's temperature
adjustment.
4. Passenger temperature
adjustment.
5. A i r fl o w a d j u s t m e n t .
6. System off.
7. Driver's air distribution
adjustment.
8. Passenger air distribution
adjustment.
9. Automatic visibility
programme (demisting).
10. Air intake/Air recirculation.
11. Rear screen and exterior
mirrors demisting.
12. Air conditioning On/Off (A/C).
40
Dual zone automatic air conditioning
Use of the automatic regulation
of the air conditioning is recom-
mended.
Page 43 of 182
3
43
10 - Intake of exterior air/
Recirculation of interior air
This function enables you to
isolate the passenger com-
partment from exterior fumes
and odours.
11 - Rear screen and mirrors
demisting
Press this button, with the
engine running, to demist
the rear screen and the
exterior mirrors. The indi-
cator light comes on.
Demisting is switched off automatical-
ly to avoid an excessive consumption
of current and in relation to the exterior
temperature.
It may be stopped by pressing this
button again or when the engine is
switched off.
H o w e v e r , t h e d e m i s t i n g r e s u m e s i f t h e
engine is switched on again within one
minute.
Switch off the rear screen and exterior
mirrors demisting when you consider
this necessary as low current con-
sumption reduces fuel consumption.
12 - Air conditioning On/Off (A/C)
The deactivation of this func-
tion may result in tempera-
ture, humidity, odour and
smoke discomfort.
Press this button to switch off the
air conditioning.
The symbol "A/C" is switched off.
Press this button again to return to
automatic operation of the air con-
ditioning.
The symbol "A/C" is displayed.
Press this button to set the air
intake mode, the indicator light
comes on in recirculation mode.
Prolonged operation in interior air
recirculation mode may result in
the formation of condensation and
deterioration of the quality of the
interior air.
Do not drive in air recirculation mode for prolonged periods, except
in truly exceptional atmospheric
conditions.
The message associated with the control is displayed on the multi-
function display.
Press this button again to return to
automatic control of the air intake.
F o r y o u r c o m f o r t , w h e n t h e i g n i -
tion is switched off, the settings are
stored until it is switched on again.
Page 44 of 182
3
44
MIRRORS
A u t o m a t i c a l l y a d j u s t a b l e m i r r o r s
for parking
These allow you to see the ground
(kerb, wall...) when carrying out park-
ing manoeuvres in reverse gear. The end of the driver and pas-
senger mirrors is convex in or-
der to reduce the "blind spot"
( a r e a a t e d g e d e fi n e d b y a
dotted line).
As a result, objects observed in the
driver and passenger mirrors are, in
reality, closer than they appear.
This must be taken into account to
judge correctly the distance of vehi-
cles approaching from behind.
Tilting the mirror to the parking
position
Turn control A to the right or to the
left.
Engage reverse gear.
The exterior mirror corresponding to
the side on which you are parking tilts
downwards.
Exterior mirrors
- from outside:
Lock the vehicle using the re-
mote control.
When the vehicle is parked, the exterior
m i r r o r s c a n b e f o l d e d b a c k m a n u a l l y .
Adjustment
Turn knob A to the right or to the
left to select the corresponding
mirror.
Move knob A in all four directions
to adjust.
Folding back the mirrors
e l e c t r i c a l l y
- from inside:
With the ignition on, turn knob A
rearwards.
If the mirrors are folded back using
knob A , they will not unfold when the
vehicle is unlocked using the remote
control. You must turn knob A again. A u t o m a t i c d a y / n i g h t e x t e r i o r
mirrors
These darken automatically depending
on the brightness from the rear.
They are linked with the automatic
day/night interior mirror (see para-
graph "Automatic day/night interior
mirror").
To ensure maximum visibility during
manoeuvres, the mirror clears au-
tomatically when reverse gear is en-
gaged.
Initial setting of the function
Engage reverse gear.
Select and adjust the left and right
mirrors in succession.
These settings will be stored when the
vehicle is locked. Returning the mirror to the normal
position
Change out of reverse gear.
After a few seconds, the glass of the
corresponding mirror resumes its nor-
mal position.
You can deactivate the function by return-
ing control A t o t h e c e n t r a l p o s i t i o n "
Page 45 of 182
3
45
A u t o m a t i c d a y / n i g h t i n t e r i o r mirror Operation
Switch on the ignition and press switch 1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mirror
clears automatically when re-
verse gear is engaged.
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .
Adjust the height and depth of the
steering wheel.
Lock by pulling handle A fully.
Page 46 of 182
3
45
A u t o m a t i c d a y / n i g h t i n t e r i o r mirror Operation
Switch on the ignition and press switch 1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mirror
clears automatically when re-
verse gear is engaged.
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .
Adjust the height and depth of the
steering wheel.
Lock by pulling handle A fully.
Page 49 of 182
3
48
Memorising driving and mirror positions
Memorising using the controls on
the driver's door
To memorise:
Place the key in the ignition on po-
sition,
Adjust your seat and mirrors,
Press button M , then button 1 " fi r s t
driving position" or button 2 "sec-
ond driving position" within four
seconds.
A n a u d i b l e s i g n a l c o n fi r m s t h a t a p o s i t i o n
has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
I g n i t i o n o n , v e h i c l e s t a t i o n a r y
B r i e fl y p r e s s b u t t o n 1 or 2 to recall
the corresponding memorised po-
sition. The end of the setting is in-
dicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
G - Heated seats adjustment
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0
: Off.
1
: Low.
2
: Medium.
3
: H i g h . The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons
M/1 and M/2 . Vehicle moving
Keep button 1 or 2 pressed down
until the bleep indicates that set-
ting of the corresponding memo-
rised position is complete.
Page 50 of 182
3
48
Memorising driving and mirror positions
Memorising using the controls on
the driver's door
To memorise:
Place the key in the ignition on po-
sition,
Adjust your seat and mirrors,
Press button M , then button 1 " fi r s t
driving position" or button 2 "sec-
ond driving position" within four
seconds.
A n a u d i b l e s i g n a l c o n fi r m s t h a t a p o s i t i o n
has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
I g n i t i o n o n , v e h i c l e s t a t i o n a r y
B r i e fl y p r e s s b u t t o n 1 or 2 to recall
the corresponding memorised po-
sition. The end of the setting is in-
dicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
G - Heated seats adjustment
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0
: Off.
1
: Low.
2
: Medium.
3
: H i g h . The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons
M/1 and M/2 . Vehicle moving
Keep button 1 or 2 pressed down
until the bleep indicates that set-
ting of the corresponding memo-
rised position is complete.
Page 82 of 182
5
71
Automatic windscreen wiper
The automatic wiping is controlled by a
r a i n s e n s o r , fi t t e d o n t h e w i n d s c r e e n .
In AUTO mode, the wipers operate
automatically and adjust their speed
to the intensity of the rainfall .
Activation
Deactivation This warning light comes on
on the instrument panel, ac-
companied by a message
on the multifunction display,
when the driver presses the
wipers stalk down in
AUTO
mode.
This warning light comes on on
the instrument panel when the
driver moves the wipers stalk to
position I , 1 or 2 .
In the event of a malfunction , the
driver is informed of this by a message
on the multifunction display.
In AUTO mode, the wipers will then
operate in intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Do not cover the rain sensor,
located on the windscreen be-
hind the interior mirror.
When using a car wash, switch
off the ignition.
In winter, it is advisable to wait until the
windscreen is completely clear of ice
before activating the automatic wipers.
When parking in snowy weather, position
the blades at the top of the windscreen
(maintenance position) to prevent the ac-
cumulation of snow.