height adjustment Peugeot 607 Dag 2009 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2009, Model line: 607 Dag, Model: Peugeot 607 Dag 2009Pages: 182, PDF Size: 10.7 MB
Page 4 of 182
9. Deactivation of the interior alarm.
Deactivation of the ESP/ASR system.
10. Adjustable and closing side vent.
11. Driver's side window de-icing and
demisting vent.
12. Driver's seat electric controls.
13. Driver's heated seat control.
14. Bonnet release.
15. Deactivation of the parking assistance.
SPORT suspension control.
Sunroof control.
Rear blind control.
16. Armrest with storage compartment.
17. Rear ashtray.
18. Rear lighter (100 W max.).
19. Rear heated seat controls.
1. Cruise control/speed limiter switches.
2. Steering wheel height and depth
adjustment.
3. Lights and direction indicators
controls.
4. Instrument panel.
5. Driver's air bag.
Horn.
6. Gear lever.
7. Driver's footwell air outlet.
8. Fascia fuse box.
Page 7 of 182
A. Forwards-backwards adjustment.
Electric front seat adjustment
D. Seat back angle adjustment.
E. Head restraint height adjustment.
B. Seat cushion angle adjustment.
F. Heated seat adjustment.
C. Height adjustment.
M. Adjustments memorisation.
1. R e c a l l o f t h e fi r s t p o s i t i o n .
2. Recall of the second position.
46
Page 8 of 182
Electric mirror adjustment Steering wheel adjustment
44 45
A. Steering wheel height and depth
adjustment locking and release
control.
1. Locked position.
2. Released position.
B. Exterior mirrors selection, adjustment
and folding control.
1. Selection of the driver's mirror.
2. C e n t r a l p o s i t i o n "
Page 9 of 182
Front seat belts
61
Electric window controls
1. Driver's electric window control.
2. Passenger electric window control.
3. Rear right electric window control.
4. Rear left electric window control.
Also...
5. Deactivation of the electric
window controls located in
the rear (child safety).
80
1. Fastening.
2. Height adjustment.
Mirrors with automatic tilting in reverse gear
Initial setting of the function
(memorisation)
With the engine running, engage
reverse gear.
Select and adjust the left and right
mirrors in succession using button B .
44
Tilting the mirror to the parking
position (use)
Turn control B to the right or to the
left, then engage reverse gear.
Returning the mirror to the normal
position
Exit reverse gear or place button B
i n t h e c e n t r a l p o s i t i o n "
Page 45 of 182
3
45
A u t o m a t i c d a y / n i g h t i n t e r i o r mirror Operation
Switch on the ignition and press switch 1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mirror
clears automatically when re-
verse gear is engaged.
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .
Adjust the height and depth of the
steering wheel.
Lock by pulling handle A fully.
Page 46 of 182
3
45
A u t o m a t i c d a y / n i g h t i n t e r i o r mirror Operation
Switch on the ignition and press switch 1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mirror
clears automatically when re-
verse gear is engaged.
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .
Adjust the height and depth of the
steering wheel.
Lock by pulling handle A fully.
Page 47 of 182
3
46
FRONT SEATS
B - Seat cushion angle adjustment C - Seat height adjustment
A - Forwards-backwards
adjustment
Push the control forwards or back-
wards to slide the seat. Tilt the front of the control upwards or
downwards to obtain the required angle.
Tilt the rear part of the control upwards
or downwards to obtain the required
height.
Electric front seats
The electric functions of the
driver's seat are deactivated
one minute after the ignition is
switched off.
The operation of the electric
seats will be deactivated tem-
porarily if the energy economy
mode is activated.
Page 48 of 182
3
47
E - Head restraint height and angle adjustment F - Lumbar adjustment
(manual adjustment)
D - Seat back angle adjustment
Never drive with the head re-
straints removed; they must be
in place and adjusted correctly.
Tilt the control to the front or the rear to
obtain the correct angle.
Tilt the control upwards or push it down-
wards to obtain the correct height. Raise or lower the lever to obtain the
required position.
The setting is correct when
the upper edge of the head
restraint is level with the top
of the head.
The head restraint angle can also be
adjusted manually.
To remove the head restraint, tilt the
seat back to 45° and place the head
restraint in the high position, then pull
with both hands.
Page 80 of 182
5
70
AUTOMATIC HEADLAMP
ADJUSTMENT
In cases of malfunction , the
warning light comes on on
the instrument panel display,
accompanied by an audible
signal and a message on the
multifunction display. The system places
your headlamps to the low position.
Do not touch the xenon bulbs. Consult
a PEUGEOT dealer.
When stationary with the ignition
on , the system automatically corrects
the height of the beam, whatever the
load of the vehicle. The driver is then
assured of having optimum lighting
and not causing a nuisance to other
road users.
WINDSCREEN WIPER STALK
Windscreen wipers
2 Fast wipe (heavy rain).
1 Normal wipe (moderate rain).
I Intermittent wipe
0 Off
Automatic wipe then single sweep.
In the Intermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In the AUTO position, no further action
on your part is required.
The automatic wiping must
be reactivated if the ignition
has been switched off for more
than one minute, by pressing
the stalk down .
Maintenance position
This position enables the wiper blades
to be removed.
In the minute following switching off of
the ignition, any action on the wipers
stalk positions the wipers at the top
of the windscreen (parking in winter,
cleaning, replacement of the blades).
To reposition the wipers after this has
been done, switch on the ignition and
operate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk to-
wards you. The windscreen wash then
the windscreen wipers operate for a
fi x e d p e r i o d .
The headlamp wash is also activated,
if the headlamps are on.
Screenwash/headlampwash low When the minimum level of
the reservoir is reached, this
warning light comes on, ac-
companied by an audible
signal and a message on the
multi-function display.
N e x t t i m e y o u s t o p , fi l l t h e s c r e e n -
wash/headlamp wash reservoir.
If the reservoir is empty, the warning
light comes on when the ignition is
switched on, or every time the stalk is
o p e r a t e d , u n t i l t h e r e s e r v o i r i s fi l l e d .
Page 81 of 182
5
70
AUTOMATIC HEADLAMP
ADJUSTMENT
In cases of malfunction , the
warning light comes on on
the instrument panel display,
accompanied by an audible
signal and a message on the
multifunction display. The system places
your headlamps to the low position.
Do not touch the xenon bulbs. Consult
a PEUGEOT dealer.
When stationary with the ignition
on , the system automatically corrects
the height of the beam, whatever the
load of the vehicle. The driver is then
assured of having optimum lighting
and not causing a nuisance to other
road users.
WINDSCREEN WIPER STALK
Windscreen wipers
2 Fast wipe (heavy rain).
1 Normal wipe (moderate rain).
I Intermittent wipe
0 Off
Automatic wipe then single sweep.
In the Intermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In the AUTO position, no further action
on your part is required.
The automatic wiping must
be reactivated if the ignition
has been switched off for more
than one minute, by pressing
the stalk down .
Maintenance position
This position enables the wiper blades
to be removed.
In the minute following switching off of
the ignition, any action on the wipers
stalk positions the wipers at the top
of the windscreen (parking in winter,
cleaning, replacement of the blades).
To reposition the wipers after this has
been done, switch on the ignition and
operate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk to-
wards you. The windscreen wash then
the windscreen wipers operate for a
fi x e d p e r i o d .
The headlamp wash is also activated,
if the headlamps are on.
Screenwash/headlampwash low When the minimum level of
the reservoir is reached, this
warning light comes on, ac-
companied by an audible
signal and a message on the
multi-function display.
N e x t t i m e y o u s t o p , fi l l t h e s c r e e n -
wash/headlamp wash reservoir.
If the reservoir is empty, the warning
light comes on when the ignition is
switched on, or every time the stalk is
o p e r a t e d , u n t i l t h e r e s e r v o i r i s fi l l e d .