phone PEUGEOT BOXER 2015 Owner's Manual

228"navigation" voice commands
these voice commands can be issued from any main screen page after pressing the voice recognition button on the steering wheel, as long as
t here is no telephone call in progress.
Level 1 Level 2Level 3
com

ment
Go home Displays the route home.
2
d m

ode Changes to 2D mode.
3
d m

ode Changes to 3D mode.
dele

te route Deletes the route displayed.
Add a favourite Displays the favourites screen page.
repe

at instruction Repeats the last voice message spoken.
touch Screen Audio - telematic System

229"test message" voice commands
these voice commands can be issued from any main screen page after pressing the telephone button on the steering wheel, as long as there
is no telephone call in progress.
Level 1 Level 2Level 3
com

ment
Send a text to 0123456789
Starts the voice procedure for sending a pre-
defined text message using the system.
Send a text to Henri
dup

ontMobile phone
di

splay text Henri
dup

ontMobile phone Displays the message box downloaded from the
telephone.
touch Screen Audio - telematic System
AuDIO and teLeMAtICS
10

230"Hands-free calls" voice commands
Commands available during a call.these voice commands can be issued from any main screen page during a call after pressing the telephone button on the steering wheel, as
long as there is no telephone call in progress.
Level 1 Level 2Level 3
com

ment
Send 0123456789
the s

election tones for 0123456789 are sent.
Send "Voicemail
password"
the s

election tones for the numbers saved in
"Voicemail password" are sent.
Activate speakers
tra

nsfers the call to the telephone or the system.
Activate / deactivate mikeSystem mike ON / OFF.
touch Screen Audio - telematic System

231Audio system
Multimedia audio system - Bluetooth® telephone
Contents
First steps 232
St
eering mounted controls
233
R

adio
2
34
Media
23

6
tele

phone
23
8
Settings
23

9
Voice commands
24

0
the s

ystem is coded in such a way that it will only operate in
your
v

ehicle. As a safety measure, the driver must only carry out operations
which require prolonged attention while the vehicle is stationary.
When the engine is not running and to prevent discharging of the
battery, the audio system may switch off following activation of
energy economy mode.
Audio System
AuDIO and teLeMAtICS
10

232First steps
On/off, volume setting.
Select FM and AM wavebands.
Display the list of connected
telephones.Rotate: scroll through a list or adjust
radio station.
Press: confirm the option displayed in
the screen.
Select
uSB o

r A
uX so
urce. Information on the current radio
station or media. Repeat play.
Select preset stations:
FM-A, FM-B, FM- C, AM-A, AM-B,
AM-C. Mute / restore sound. Radio buttons 1 to 6:
Select a pre-set radio station.
Long press: pre-set a station.
Random (shuffle) play
Automatic frequency search up.
Select the next
uSB t

rack.
Press and hold: fast for ward.
Display the menu and adjust options. Automatic frequency search down.
Select the previous
uSB t

rack.
Press and hold: fast back.
Abandon the current operation.
go up o

ne level (menu or folder).
Audio System

233Steering mounted controls
Pause / restore the CD, uSB/iPod,
Bluetooth® sources.
Mute / restore sound from the radio.
Switch the microphone off / on during
a telephone call.
Switch voice recognition on.
Interrupt a voice message to start a
new voice command.
Interrupt voice recognition. Push up or down: increase or
decrease the volume for voice
announcements and music sources,
hands-free and speaking texts. Accept an incoming call.
Accept a second incoming call and
put the current call on hold.
Switch on voice recognition for the
telephone function.
Interrupt a voice message to issue
another voice command.
Interrupt voice recognition.
Radio, push up or down: select the
next / previous station.
Radio, hold up or down: sweep
frequencies up / down until the button
is released.
Media, push up or down: select the
next / previous track.
Media, hold up or down: fast for ward
/
b

ack until the button is released.
Reject the incoming call.
end t

he call in progress.
Audio System
AuDIO and teLeMAtICS
10

238telephone
Pairing a Bluetooth®
telephone
As a safety measure and because they
require prolonged attention on the part
of the driver, the operations for pairing
the Bluetooth mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary.
Switch on the Bluetooth function of your
telephone and ensure that it is "visible to all"
(telephone configuration).
Select "
con

nect tel" to start the
pairing procedure, and search for the
name of the system in the telephone. When the pairing procedure has
finished successfully, a screen page
with "
con

nection successful"
appears:
Confirm to display the menus.
the t

elephone menu gives access to
the following functions in particular:
"
call

log", "
co

ntacts" *, "Keypad ".
When pairing, a screen page is displayed
showing progress in the operation.
usi

ng the telephone's keypad, enter the PIN
displayed in the screen of the system or
confirm in the telephone the PIN displayed. Press "
Phone".
If no telephone has yet been paired
in the system, a special page is
displayed in the screen. If the operation fails, we recommend
switching the function Bluetooth of
your telephone off and then on again.
* If your telephone is fully compatible.
receiving a call
An incoming call is announced by a ring and a
superimposed display in the screen. Press this button to accept the
incoming call.
Or press this button to reject the call.
Ending a call
to reject a call, press this button at
t he steering mounted controls.
Making a call
Select "call log" for access to the
recent calls made.
Select "
co

ntacts" to display your
contacts and use the dial to scroll
through the list.
to di

al a number, use the system's
" Keypad ".
Audio System

240Voice commands
Steering mounted controls
Information - using the system
Instead of touching the screen, you can
use your voice to issue commands to
the system. Voice interaction can be quickly used
if these buttons are pressed during
a voice message from the system; It
allows a voice command to be issued
di r e c t l y.
For example, if the system is speaking
a voice help message and if you want
to know the command to give the
system, by pressing these buttons, the
voice message is interrupted and the
desired voice command can be spoken
directly (so avoiding the need to listed
to the complete voice help message).
When the system is waiting for a voice
command from the user, pressing these
buttons closes the voice session.
to en

sure that your voice commands
are always recognised by the system,
we recommend that you follow the
advice below:
-
sp

eak with a normal tone of voice,
-
be

fore speaking, always wait for
the "beep" (audible signal),
-
th

e system is able to recognise
the voice commands delivered,
independent off gender, tone and
inflexion of the voice of the person
speaking,
-
ke

ep the noise level inside the
vehicle as low as possible,
-
be

fore speaking a voice command,
ask other passengers not to speak.
As the system recognizes voice
commands whatever is said, when
more than one person speaks
at the same time, it is possible
that the system will recognise
commands different or additional to
the one intended,
eve

ry time a button is pressed, a
"beep" (audible signal) is produced
and the screen displays a page of
suggestions asking the user to speak a
command.
- fo
r best operation, it is
recommended that the windows
and opening roof (for versions/
markets where it is available) be
closed to avoid inter ference from
extraneous noises.
thi

s button switches on the
"
tele

phone" voice recognition mode,
which makes it possible to start calls,
view the log of recent /received/made,
display contacts, etc.
thi

s button switches on the "Radio/
Media" voice recognition mode,
which makes it possible to tune to a
specific radio station radio or specific
AM/FM radio frequency, play a track
or an album on a
uSB m

emory stick /
iPod/MP3 CD.
Audio System

241
Global voice commands
these commands can be made from any screen page after pressing the voice recognition or telephone button located on the steering wheel,
a s long as there is no telephone call in progress.
Level 1 Level 2Level 3
com

ment
Help Provides generic help to the user by suggesting
certain available commands.
canc

el Closes the current voice session.
repe

at Repeats to the user the last voice message spoken.
Voice tutorial Provides the user with detailed description of how
to use the voice system.
Audio System
AuDIO and teLeMAtICS
10

242
Level 1Level 2Level 3com ment
ca

ll * Henri
dup

ont Dials the telephone number associated with contact
Henri Dupont.
ca

ll* Henri
dup

ontMobile phone Dials the telephone number labelled mobile phone
associated with contact Henri Dupont.
cal

l number 0123456789 Calls the telephone number 0123456789.
call

again Calls the number or contact of the last call made.
cal

l back Calls the number or contact of the last call received.
rec

ent calls* Displays the list of recent calls: outgoing, missed
and incoming.
cal

ls made* Displays the list of outgoing calls.
Missed calls* Displays the list of missed calls.
*


t
hi

s function is available only if the telephone connected to the system supports downloading of contacts and recent calls and if the
download has been done.
"telephone" voice commands
If a telephone is connected to the system, these voice commands can be issued from any main screen page after pressing the telephone
button on the steering wheel, as long as there is no telephone call in progress.
If there is no telephone connected, a voice message announces: "No telephone connected. Connect a telephone and try again" and the voice
session will be closed.
Audio System