battery Peugeot Boxer Dag 2010 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2010, Model line: Boxer Dag, Model: Peugeot Boxer Dag 2010Pages: 167, PDF Size: 4.33 MB
Page 16 of 167
20
Access
KEY
T h i s l o c k s a n d u n l o c k s t h e l o c k s o n t h e
v e h i c l e a n d s t a r t s t h e e n g i n e .
REMOTE CONTROL BATTERY
R e f e r e n c e : C R 2 0 3 2 / 3 v o l t s .
Changing the remote control battery
- p r e s s t h e b u t t o n t o e j e c t t h e k e y ,
- t u r n t h e s c r e w 1 f r o m t h e c l o s e d p a d l o c k
t o t h e o p e n p a d l o c k u s i n g a s c r e w d r i v e r
w i t h a t h i n l i p ,
- u s e t h e s c r e w d r i v e r a s a l e v e r t o e x t r a c t t h e b a t t e r y h o l d e r h o u s i n g 2 , - r e m o v e t h e h o u s i n g a n d c h a n g e t h e
battery 3 o b s e r v i n g t h e p o l a r i t i e s ,
- p u t t h e b a t t e r y h o l d e r h o u s i n g 2 back
i n s i d e t h e k e y a n d s e c u r e i t b y t u r n i n g
t h e s c r e w 1 .
T h e r e i s a r i s k o f d a m a g e i f t h e
r e p l a c e m e n t b a t t e r y i s n o t o f t h e
correct type.
O n l y u s e b a t t e r i e s w h i c h a r e i d e n t i c a l o r o f
a n e q u i v a l e n t t y p e t o t h o s e r e c o m m e n d e d
b y a P E U G E O T d e a l e r . T a k e u s e d b a t t e r i e s
t o a n a p p r o v e d c o l l e c t i o n p o i n t .
Page 17 of 167
20
Access
KEY
T h i s l o c k s a n d u n l o c k s t h e l o c k s o n t h e
v e h i c l e a n d s t a r t s t h e e n g i n e .
REMOTE CONTROL BATTERY
R e f e r e n c e : C R 2 0 3 2 / 3 v o l t s .
Changing the remote control battery
- p r e s s t h e b u t t o n t o e j e c t t h e k e y ,
- t u r n t h e s c r e w 1 f r o m t h e c l o s e d p a d l o c k
t o t h e o p e n p a d l o c k u s i n g a s c r e w d r i v e r
w i t h a t h i n l i p ,
- u s e t h e s c r e w d r i v e r a s a l e v e r t o e x t r a c t t h e b a t t e r y h o l d e r h o u s i n g 2 , - r e m o v e t h e h o u s i n g a n d c h a n g e t h e
battery 3 o b s e r v i n g t h e p o l a r i t i e s ,
- p u t t h e b a t t e r y h o l d e r h o u s i n g 2 back
i n s i d e t h e k e y a n d s e c u r e i t b y t u r n i n g
t h e s c r e w 1 .
T h e r e i s a r i s k o f d a m a g e i f t h e
r e p l a c e m e n t b a t t e r y i s n o t o f t h e
correct type.
O n l y u s e b a t t e r i e s w h i c h a r e i d e n t i c a l o r o f
a n e q u i v a l e n t t y p e t o t h o s e r e c o m m e n d e d
b y a P E U G E O T d e a l e r . T a k e u s e d b a t t e r i e s
t o a n a p p r o v e d c o l l e c t i o n p o i n t .
Page 25 of 167
Instruments and controls
28
Warning
lamp is indicates Solution - action
C o o l a n t
temperature o n w i t h t h e
n e e d l e i n t h e r e d
zone.
an abnormal increase.
P a r k a n d s w i t c h o f f t h e i g n i t i o n , a l l o w t h e s y s t e m
t o c o o l .
Visually check the level.
o n H i n t h e r e d
zone. a coolant temperature. R e f e r t o t h e " L e v e l s " s e c t i o n o f c h a p t e r 7 . C o n s u l
t a
P E U G E O T d e a l e r .
Engine oil
pressure o n w h i l e d r i v i n g . t h a t t h e p r e s s u r e i s t o o l o w .
P a r k a n d s w i t c h o f f t h e i g n i t i o n , a l l o w t h e l u b r i c
a t i o n
s y s t e m t o c o o l i n o r d e r t o c h e c k i t s l e v e l . R e f e r t o t h e
" L e v e l s " s e c t i o n o f c h a p t e r 7 .
c o n t i n u o u s l y o n ,
even though the
level is correct. a m a j o r f a u l t . C o n s u l t a P E U G E O T d e a l e r .
f l a s h i n g , f o r a
f e w s e c o n d s ,
w i t h a m e s s a g e
on the screen. t h a t a s e r v i c e w i l l s o o n b e d u e .
R e f e r t o t h e l i s t o f c h e c k s i n t h e s e r v i c i n g b o o k l
e t t h e n
carry out the PEUGEOT service.
Battery charge on.
a f a u l t i n t h e c h a r g i n g c i r c u i t . C h e c k t h e b a t t e r y t e r m i n a l s … R e f e r t o t h e " B a t t e r y
"
s e c t i o n o f c h a p t e r 8 .
c o n t i n u o u s l y o n ,
f i x e d o r f l a s h i n g
i n s p i t e o f t h e
checks. a c i r c u i t f a u l t , a n i g n i t i o n o r
i n j e c t i o n m a l f u n c t i o n .
C o n s u l t a P E U G E O T d e a l e r .
Door or bonnet
o p e n d e t e c t i o n on. t h a t a d o o r o r t h e b o n n e t i s n o t
c l o s e d c o r r e c t l y . C h e c k t h a t t h e c a b d o o r s , t h e r e a r a n d s i d e d o o r s
a n d
t h e b o n n e t a r e c l o s e d .
Page 40 of 167
42
Steering mounted controls
HEADLAMP BEAM
You are advised to adjust the height of the
headlamp beams in accordance with the load in
your vehicle.
This function works in the dipped and main
beam headlamps position. Press these controls, located
on the dashboard, several times
in succession to adjust the
headlamps.
An indicator lamp on the screen
indicates the adjustment position
selected (0, 1, 2, 3).
SIDE/PARKING LAMPS
This system enables you to leave the
sidelamps on when parked; with the
ignition off, key in the STOP position or key
removed.
Move the ring on the lighting stalk to position
O then to sidelamps, dipped or main beam
headlamps.
The warning
lamp
on the
instrument panel comes on.
The sidelamps will remain on
while you are parked.
Leaving the lighting on for long periods
may significantly reduce the charge of your
vehicle's battery.
Page 78 of 167
Tachograph
80
TACHOGRAPH
If your vehicle is fitted with a tachograph,
this permits storing of all of the data relating
to the vehicle in the unit and on a card
inserted in it.
Example: at the beginning of each journey
or change of team. When the card is inserted, all of the data
can be:
- displayed on the tachograph screen,
- printed,
- transferred to external storage media via
an interface. For further information, refer to the
documents supplied by the manufacturer of
the tachograph.
If your vehicle is fitted with a tachograph,
disconnection of the negative (-) terminal of
the battery (located under the floor on the
left-hand side, in the cab) is recommended if
the vehicle is not to be used for a period of
more than 5 days.
Page 87 of 167
89
4
TECHNOLOGY ON BOARD
Introduction
KEY
Indicates that a maintained press is required to start the action described.
Voice mode Press the control to start the voice recognition, an audible signal confirms that the function has be en activated, do not speak until
you hear this signal.
For further information regarding the voice comman ds, say "Help" or refer to the tables at the end of this document.
INTRODUCTION
This equipment chiefly enables you to:
- connect your Bluetooth®
mobile telephone to your vehicle leaving your hand s free,
- play audio sources (mp3, wma, wav) from a port able player,
- use the voice commands.
Recommendations
If the battery is disconnected, the equipment can operate for a further 15 minutes
(approximately).
The buttons "F1, F2, NAV, SOS" on the equipment's control panel are not active.
HANDS-FREE SYSTEM
Page 127 of 167
125
7
CHECKS
Under the bonnet
DIESEL ENGINES
1. Windscreen/headlamp wash reservoir.
2. Fusebox.
3. Coolant reservoir.
4. Brake and clutch fluid reservoir.
5. Air filter.
6. Dipstick.
a : 2.2 Iitre 100
b : 2.2 Iitre 120
c : 3.0 Iitre 160
7. Engine oil filler cap.
a : 2.2 Iitre 100
b : 2.2 Iitre 120
c : 3.0 Iitre 160
8. Power steering reservoir. Battery connections:
+ Positive metal point.
- Negative metal point (earth).
UNDER THE BONNET
Page 130 of 167
Checks
CHECKS
Air filter and passenger compartment filter
A clogged passenger compartment filter
may reduce the performance of the
air conditioning system and generate
undesirable odours. The replacement
intervals for these components are indicated
in the servicing booklet.
Depending on the environment (dusty
atmosphere...) and the use of the vehicle
(urban driving...), change them twice as
often if necessary, refer to the "Under the
bonnet" section of chapter 7.
Manual gearbox
Have the level checked in accordance with
the manufacturer's servicing schedule. To check the main levels and certain
components, in accordance with the
manufacturer's servicing schedule, refer to
the pages of the servicing booklet which
correspond to your vehicle's engine.
Only use products recommended by
PEUGEOT or products of equivalent quality
and specification.
In order to optimise the operation of units as
important as the braking system, PEUGEOT
selects and offers specific products.
In order to avoid damaging the electrical
units, high pressure washing to clean the
engine compartment is strictly prohibited.
Parking brake
Where the parking brake travel is too great
or there is a reduction in the performance
of the system, the parking brake should be
adjusted, even between services.
Have the system checked by a PEUGEOT
dealer.
Bleeding the water contained in the Diesel filter
If this warning lamp comes on,
bleed the filter, otherwise bleed
regularly each time the engine oil
is changed.
To drain the water out, unscrew the bleed
screw or the water in Diesel sensor, located
at the base of the filter. Leave open until
all of the water has been drained out. Then
tighten the bleed screw or the water sensor.
HDi engines use advanced technology. All
work requires a special qualification which is
guaranteed by a PEUGEOT dealer.
Battery
At the start of winter, have your battery
checked by a PEUGEOT dealer.
Brake pads
Brake pad wear depends on the style of
driving, in particular for vehicles which are
used in town, over short distances. It may
be necessary to check the thickness of the
pads, even between services.
Unless there is a leak on the system, a drop
in the brake fluid level indicates that the
brake pads are worn.
Brake disc/drum wear status
For any information relating to checking
the brake disc/drum wear status, contact a
PEUGEOT dealer.
Oil filter
Change the filter regularly, in accordance
with the servicing schedule.
Page 131 of 167
130
Fuel
Low fuel level
When the fuel tank level E
(Empty) is reached, this warning
lamp comes on. At this moment,
you have enough fuel left to
drive approximately 30 miles (50 km) ,
depending on the driving conditions, the
engine and the profile of the road. Fill up
without delay to avoid running out of fuel. The fuel tank must be filled
with the engine
off.
- Open the fuel filler flap.
- Support the cap with one hand.
- With the other hand, insert the key, then turn it anticlockwise.
- Remove the cap and hook it onto the clip located on the inside of the flap.
A label affixed to the inside of the flap
reminds you of the type of fuel to be used.
When filling the fuel tank, do not continue
after the 3rd cut-off of the nozzle. This could
cause malfunctions.
The capacity of the fuel tank is
approximately 90 litres.
- After filling the fuel tank, lock the cap and close the flap.
Fuel tanks of different capacities, 60 and
125 litres, may be fitted.
FUEL SYSTEM
CUT-OFF
In the event of a serious collision, a device
automatically cuts off the fuel supply to the
engine and the vehicle's electrical supply.
FILLING WITH FUEL
Check that there is no smell or leak of fuel
outside the vehicle.
Restore the supply by pressing:
- the first button, located under the glove box.
- the second button, located in the battery compartment under the driver's floor.
In low temperatures
In mountainous and/or cold areas, it is
advisable to use a "winter" type fuel suited
to low or minus temperatures.
Page 132 of 167
131
QUICK HELP
8
A. Positive metal point on your vehicle
B. Slave battery
C. Earth on your vehicle
Charging the battery using a charger
- disconnect the battery located in the
front left floor,
- follow the instructions for use given by the battery charger manufacturer,
- reconnect starting with the negative (-) terminal,
- check that the terminals and connectors are clean. If they are covered with
sulphate (white or greenish deposit),
disconnect them and clean them. The charging operation must be carried
out in a ventilated area away from naked
flames or any possible sources of sparks to
eliminate the risk of explosion and fire.
Do not attempt to charge a frozen battery: it
must first be thawed to eliminate the risks of
explosion. If the battery has frozen, before
charging it have it checked by a specialist
who will check that the internal components
have not been damaged and that the
container is not cracked, which could mean
that there is a risk of a leak of toxic and
corrosive acid.
BATTERY
Starting from another battery
- connect the red cable to the metal
point A then to the positive (+) terminal
of the slave battery B ,
- connect one end of the green or black cable to the negative (-) terminal of the
slave battery B ,
- connect the other end of the green or black cable to the earth point C on your
vehicle,
- operate the starter, let the engine run,
- wait for the engine to return to idle, then disconnect the cables.
Battery