Peugeot iOn 2015 Owner's Guide

29
Ion_en_Chap02_ouvertures_ed01-2014
1. Driver's electric window.
2. Passenger's electric window.
3.
R

ear right electric window.
4.
R

ear left electric window.
5.
D

eactivating the passenger and rear
electric window switches.
Electric windows
Operation
Deactivating the passenger and
rear electric window switches
F For the safety of your children, press switch 5 to prevent operation of the
passenger and rear electric windows
irrespective of their position.
When the button is pressed down, the switches are deactivated.
When the button is raised, the switches are activated.
System which opens or closes a window manually or automatically. It is fitted with a deactivation system to prevent misuse of the rear controls.
The electric window switches remain
operational for approximately
30 seconds after the ignition is switched
of f.
The windows can no longer be opened
or closed after the driver's door is
closed.
With the ignition on:
F

P
ress the switch gently to open or pull it
gently to close. The window stops as soon
as the switch is released.
Always remove the key from the ignition
when leaving the vehicle, even for a
short time.
In the event of contact during operation
of the windows, you must reverse the
movement of the window. To do this,
press the switch concerned.
When the driver operates the
passenger electric window switches,
they must ensure that no one is
preventing correct closing of the
windows.
The driver must ensure that passengers
use the electric windows correctly.
Be aware of children when operating
the windows.
Automatic one-touch mode (driver's side)
F

P
ress the switch fully to open. The driver's
window opens completely when the switch
is released.
F

P
ressing the switch again stops the
movement of the window.
2
Access

30
Ion_en_Chap02_ouvertures_ed01-2014
Charging flaps
F Pull control A locate at the bottom of the
dashboard, driver's side, to release the
charging flap,
Normal charging
F Pull control C located alongside the driver's seat, outer side, to release the flap,
Fast charging*
For more information on charging
procedures, refer to the "Practical
information" section.
F

O

pen the flap on the right of the vehicle,
F

P

ress latch B to open the socket cover. * Depending on equipment.
F

O

pen the flap on the left of the vehicle,
F

P

ress latch D to open the socket cover.
Access

31
Ion_en_Chap03_confort_ed01-2014
Front seats
Manual adjustments
1. Adjustable head restraint
2. Adjustment of the backrest angle
O

perate the control lever and adjust the
position of the backrest to the front or to
the rear.
3.
A

djustment of the driver's seat height
R

aise or lower the control lever the number
of times required to obtain the desired
position.
4.
F

orwards-backwards adjustment of the
seat position
L

ift the control bar and slide the seat
forwards or backwards.
3
Comfort

32
Ion_en_Chap03_confort_ed01-2014
Head restraint height adjustment
F To raise it, pull upwards.
F T o lower it, push it downwards, pressing
the height adjustment button at the same
time.
F

T
o remove it, raise it to the high position,
then remove it pressing the height
adjustment button at the same time.
F

T
o refit it, engage the rods of the head
restraint in the apertures, pressing the
height adjustment button at the same time. Never drive with the removed head
restraints in the vehicle as they could
be thrown around the vehicle on sharp
braking. They must always be in place
and adjusted correctly.
After installing the head restraint, check
that the height adjustment button has
engaged correctly.
The adjustment is correct when the top
of the head restraint is aligned with the
top of the head of the seated person.Press the control switch, located on the
dashboard, to switch on the driver's seat
heating.
The warning lamp in the switch comes on.
The temperature is controlled automatically.
Pressing a second time stops operation.
Heated seat control
Comfort

33
Ion_en_Chap03_confort_ed01-2014
Rear seatsRear seat comprising two adjustable, foldable backrests and a fixed cushion.
Rear head restraints
These have a high position (comfort and best
safety) and a low position (best rear vision for
the driver).
They can also be removed.
To remove a head restraint:
F
p
ull the head restraint fully upwards,
F

t
hen, press the lug.When carrying rear passengers, never
drive with their head restraints removed;
ensure that they are in place and in the
high position.
Adjusting the backrest
angle
To adjust the backrest:
F p ull the control for wards to release the
backrest,
F

a
djust the backrest then release the
control.
The backrest can be adjusted to one of seven
positions.
Always ensure that the backrest has
engaged correctly.
3
Comfort

34
Ion_en_Chap03_confort_ed01-2014
Returning the seat backrest to its original position
F Push the seat backrest in position and secure it,
F

r
efit the head restraints or put them back
in


place.
1.
P

lace the head restraints in the low
position or remove them if necessary,
2.
p

ull the control for wards to release
backrest,
3.
f

old the backrest for ward.
Folding the backrest
When returning the backrest to its
original position, take care not to trap
the seat belts.
Comfort

35
Ion_en_Chap03_confort_ed01-2014
Mirrors
Adjustment
The mirrors can be adjusted when the ignition
switch is in the "ON" or "ACC" position.
F
M
ove control A to the right or to the left to
select the corresponding mirror.
F

D
irect control B in all four directions to
adjust the mirror.
When adjustment is complete, return control A
to the central position.
Door mirrors
The mirrors can also be folded
manually.
However, you must never unfold them
manually , otherwise the mirrors may
not remain in place correctly when
driving.
Always use control C to unfold them.
Electric folding / unfolding*
F With the ignition switch in the "ON" or "ACC" position: press control C to unfold
them.
F

W
ith the ignition switch in the "LOCK"
position: press control C within
30


seconds to fold them.
* Depending on version.
3
Comfort

36
Ion_en_Chap03_confort_ed01-2014
Rear view mirror
Adjust the mirror by moving it up or down and/
or to the left or right.
The rear view mirror has two positions:
-
d
ay (normal),
-

n
ight (anti-dazzle).
To change from one to the other, push or pull
the lever on the lower edge of the mirror.
Comfort

37
Ion_en_Chap03_confort_ed01-2014
Interior fittings
1. Glove box
2. Retractable cup holder
P

ress the cover to open the cup holder
3.
1 2

V accessory socket (120 W )
O

bserve the maximum power rating to
avoid damaging your accessory
4.
O

pen storage
5.
P

EUGEOT Connect USB
6.
Doo

r pocket
3
Comfort

38
Ion_en_Chap03_confort_ed01-2014
12 V accessory socket
F To connect a 12 V accessory (max power: 120 W), lift the cover and
connect a suitable adaptor.
Mats
To prevent any risk of jamming under
the pedals:
-

o
nly use mats suited to the fixings
already present in the vehicle; it is
imperative that these fixings are
used.
-

n
ever fit one mat on top of another.
When removing the mat on the driver's side,
move back the seat as far as possible and
remove the fixings.
When refitting, position the mat correctly on the
pins and clip the fixings. Check that the mat is
secured firmly.
The sun visors fold for wards, and to the side
when they are unhooked.
They are fitted with a vanity mirror and a ticket
h o l d e r.
Sun visor
Comfort