ignition Peugeot iOn 2018 Owner's Guide

92
2.Sealant bottle for the temporary repair of
a tyre.
3. Injection hose.
4. Suction hose, to extract the sealant if
necessary.
5. Bag containing a spare valve core, a tool
for removing/refitting the valve core, and
a speed limit sticker.
The speed limit sticker must be affixed to
the vehicle's steering wheel to remind you
that a wheel is in temporary use.
Do not exceed a speed of 50
mph
(80
km/h) when driving with a tyre repaired
using this type of kit.
Repair procedure
Sealing
F Switch off the ignition.
F M ake a mark on the provided speed limit
sticker to identify which wheel needs
repairing, and affix it to the vehicle's
steering wheel to remind you that a wheel is
in temporary use.
Avoid removing any foreign bodies which
have penetrated into the tyre.
F

S
hake the bottle of sealant, remove the cap
and screw on the injection hose. F

R
emove the valve cap from the tyre to be
repaired.
F

U
nscrew the valve core using the removing/
refitting tool, and keep it in a clean place.
F

C
onnect the injection hose to the valve of
the tyre to be repaired.
F

P
ress on the sealant bottle (turned upside
down) several times with the hand in order
to inject the entire content into the tyre.
In the event of a breakdown

93
Take care, this product is harmful if
swallowed and causes irritation to the
eyes.
Keep this product out of the reach of
children.
The use-by date is marked on the bottle.
After use, do not discard the bottle by the
roadside, take it to a PEUGEOT dealer or
an authorised waste disposal site.
Do not forget to obtain a new sealant
bottle, available from a PEUGEOT dealer
or a qualified workshop.
Inflation
F Check that switch A of the compressor is in the " OFF" position.
F

Un
coil the compressor hose B fully.
F

C
onnect the hose to the sealed tyre's valve.
F

C
onnect the compressor's electrical
connector to the vehicle's 12V socket
(ignition switch in "ON" or "ACC" position).
F

S
witch on the compressor by setting
switch
A in the "ON" position.
F

A
djust the pressure using the compressor in
accordance with the vehicle's tyre pressure
label located on the driver's door aperture.
A significant loss of pressure indicates that
the puncture has not been fully sealed;
contact a PEUGEOT dealer or qualified
workshop for your vehicle to be repaired.
F

R
emove the compressor and stow the kit.
F

D
rive immediately at reduced speed
(50
mph (80 km/h) max) limiting the
distance travelled to approximately
120
miles (200 km).
If after approximately five to seven
minutes, the required pressure is not
reached, this indicates that the tyre is not
repairable; contact a PEUGEOT dealer or
a qualified workshop for your vehicle to be
recovered.
F
R
emove the injection hose.
F
R
eplace the valve core using the tool. As soon as possible, go to a PEUGEOT
dealer or a qualified workshop.
You must inform the technician that you
have used this kit. After inspection, the
technician will let you know if the tyre can
be repaired or if it must be replaced.
Spare wheel
Scan the QR code on page 3 to view
explanatory videos.
Parking the vehicle
Park the vehicle where it does not block
traffic: the ground must be level, stable
and non-slippery.
Apply the parking brake, switch off the
ignition and put the drive selector in
position P in order to block the wheels.
If necessary, place a chock under the
wheel diagonally opposite to the wheel to
be changed.
Make absolutely certain that all the
occupants have left the vehicle and are
waiting in a safe area.
Never go underneath a vehicle raised
using a jack; use an axle stand.
8
In the event of a breakdown

101
Changing a fuse
Access to the tools
The extraction tweezers are fitted to the back
of the dashboard fusebox cover.
To access them:
F
U
nclip the protective cover and remove it
completely by pulling it towards you.
F

P
ull out the tweezers.
Changing a fuse
Good Failed
Tw e e z e r s
Before changing a fuse, the cause of the fault
must be found and rectified.
F

M

ake sure that the ignition switch is set to
the " LOCK " position.
F

I

dentify the failed fuse by checking the
condition of its filament.
F

U

se the special tweezers to extract the fuse
from its housing.
F

A

lways replace the faulty fuse with a fuse of
the same rating.
F

C

heck that the number marked on the
fusebox, the rating marked on the fuse and
the following tables all agree. Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your vehicle,
contact a PEUGEOT dealer or a qualified
workshop.
PEUGEOT accepts no responsibility for
the cost incurred in repairing your vehicle
or for rectifying malfunctions resulting
from the installation of accessories
not supplied and not recommended by
PEUGEOT and not installed in accordance
with its specifications, in particular when
the combined power consumption of all
of the additional equipment connected
exceeds 10
mil

liamperes.
F

T

urn the bulb holder and remove it.
F

R

emove the bulb and replace it.
To refit, carry out these operations in reverse
o r d e r.
8
In the event of a breakdown

3
Select or deselect "RDS " to switch
RDS on or off.
Confirm with " OK" to save the
setting.
Receiving TA messages
The TA (Traffic Announcement) function
gives priority to TA alert messages.
To operate, this function needs good
reception of a radio station transmitting
this type of message. When a traffic
report is transmitted, the current audio
source (radio, CD, USB, etc.) is interrupted
automatically to play the TA message.
Normal playback resumes at the end of
the transmission of the message.
Press MENU .
Select "Radio ".
Select or deselect " TA" to activate
or deactivate the reception of traffic
messages.
Confirm with " OK" to save the
setting.
Displaying RADIO TEXT
Radio Text is information transmitted by
the radio station related to the current
programme or song.
With the radio displayed on the
screen, press MENU .
Select " Radio".
Select or deselect " TXT" to activate
or deactivate the display of Radio
Te x t .
Confirm with " OK" to save the
setting.
Media
USB port
This unit comprises a USB port and a jack
socket, depending on model. The system constitutes playlists (in
temporary memory), whose creation time
can be from a few seconds to several
minutes at the first connection.
Limiting the number of non-music files and
the number of folders reduces this waiting
time. The playlists are updated every
time the ignition is switched off or a USB
memory stick is connected.
The lists are memorised: if there is no
change in the lists, the next loading time
will be shorter.
Connect a USB memory stick to the USB port
or connect a USB device to the USB port using
a suitable cable (not supplied). To protect the system, do not use a USB
hub. Press SRC/TEL repeatedly to select
" USB ".
Press one of these buttons to select
the previous or next track in the list.
.
Bluetooth® audio system

6
Telephone
Pairing a Bluetooth®
telephone
As a safety measure and because it
requires sustained attention by the
driver, the pairing of a Bluetooth mobile
telephone with the Bluetooth hands-free
system of your audio system must be done
with the vehicle stationary and the ignition
on.
Visit www.peugeot.co.uk for more information
(compatibility, more help, etc).
Activate the telephone's Bluetooth function and
ensure that it is set as visible to all (refer to the
telephone user guide). Press the MENU button.
Select "Bluetooth ".
Select "Search ".
A window is displayed with " Searching
device ". The services available depend on
the network, the SIM card and the
compatibility of the Bluetooth telephone
used.
Check the instructions for your telephone
and with your ser vice provider for the
ser vices to which you have access.
In the list, select a telephone to pair.
Confirm with " OK".
Only one telephone can be paired at a time.
In some cases, the Bluetooth address of the
telephone may appear instead of the name of
the telephone. A virtual keypad is displayed on the
screen: choose a 4-digit code.
Confirm with " OK".
A message is displayed on the screen of the
telephone: enter the same code and confirm.
If pairing fails, the number of attempts is not
restricted.
A message appears in the screen to confirm
the result of the connection.
Pairing can also be initiated from the
telephone by searching for detected
Bluetooth devices. The directory and the call list can
be accessed after the necessary
synchronisation period (if the telephone is
compatible).
Automatic connection must be configured
in the telephone to allow the connection
each time the vehicle is started.
Managing connections
Press the MENU
button.
Select " Bluetooth ".
Select "Manage connections " or
" BT
management " and confirm. The
list of paired telephones is displayed.
Indicates connection of the audio
profile.
Indicates the hands-free telephone
profile.
In the list, select a telephone to pair.
Confirm with " OK".
Bluetooth® audio system

8
Pressing and holding the back
button
or SRC/TEL also rejects an incoming
call.
Managing calls
Hang up
In the contextual menu, select
" Hang up " to end the call.
Pressing and holding SRC/TEL also
ends the call.
Secret – Mute
(so that the other person cannot hear)
In the contextual menu:
Select "Micro OFF " to switch off the
microphone.
Select " Micro OFF " to switch the
microphone on again.
Combined/telephone mode
(to leave the vehicle without ending the call)
In the contextual menu:
Select "Combined/Telephone
mode " to transfer the call to the
telephone.
Select " Combined/Telephone
mode "
to transfer the call to the
vehicle.
In some cases, the combined/telephone
mode has to be activated from the telephone.
The Bluetooth connection will be restored
automatically if the ignition has been
switched off, then on again (depending on
the compatibility of the telephone).
Audio settings
Press ¯ to display the audio
settings menu.
Press ¯ to go to the next setting.
The settings available are:
-

A

MBIANCE: BASS, TREBLE and
LOUDNESS.
-

B

ALANCE (left /right balance), FADER
(front/rear balance). The distribution, or spatialisation of sound,
is an audio process which allows the
sound quality to be improved according to
the setting chosen, corresponding to the
position of the listeners in the vehicle.
The AMBIANCE, TREBLE and
BASS


audio settings are different and
independent for each sound source.
-
S
OUND DIST. (driver or passenger).
-
A
UTO VOLUME.
Configuration
Display and language settings
Press the MENU
button.
Select "Config. ".
Select " Displaying "
to activate or
deactivate scrolling text.
Select " Language " to modify the
display language.
Bluetooth® audio system