ECU Peugeot iOn 2018 Owner's Manual

28
Mats
To take out the driver's side mat, move the seat
back as far as possible and remove the fixings.
To re-install, position it correctly on the pins
and snap on the fixings. Check that the mat is
secured correctly.To avoid any risk of jamming the pedals:
-

O
nly use mats which are suited to the
fixings already present in the vehicle;
these fixings must be used.
-

N
ever place one mat on top of another.
12 V accessory socket
F To connect a 12 V accessory (max. power:
120 W), lift the cover and connect a suitable
adaptor.
The connection of an electrical device
not approved by PEUGEOT, such as a
USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor radio
reception or inter ference with displays in
the screens.
Sun visor
Glove box
Never drive with the glove box open when
a passenger is at the front – risk of injury
in the event of sharp deceleration!
The sun visors fold for wards and sideways
when unhooked.
They are fitted with a vanity mirror and ticket
h o l d e r. 4.
Open storage compartment
5. Peugeot Connect USB – USB Player
6. Door pocket
Ease of use and comfort

53
Advice
The driver must ensure that passengers use
the seat belts correctly and that they are all
restrained securely before setting off.
Wherever you are seated in the vehicle,
always fasten your seat belt, even for short
journeys.
Do not interchange the seat belt buckles as
they will not completely fulfil their role.
The seat belts are equipped with an
inertia reel which allows the strap length
to automatically adjust to your shape. The
seat belt returns to its storage position
automatically when it is not used.
Before and after use, ensure that the seat belt
is reeled in correctly.
The lower part of the strap must be positioned
as low as possible on the pelvis.
The upper part must be positioned in the
hollow of the shoulder.
The inertia reels are fitted with a device which
automatically locks the strap in the event
of a collision or emergency braking or if the
vehicle rolls over. You can release the device
by pulling the strap firmly and then releasing it
so that it reels in slightly.In order to be effective, a seat belt:
-
M ust be tightened as close to the body as
possible,
-

M
ust be pulled in front of you with a
smooth movement, ensuring that it is not
twisted,
-

M
ust only be used to secure one person,
-

M
ust not show signs of tearing or fraying,
-

M
ust not be changed or modified, in order
to avoid affecting its performance.
In accordance with current safety regulations,
for all repairs on your vehicle's seat belts, go
to a qualified workshop with the skills and
equipment needed, which a PEUGEOT dealer
is able to provide.
Have your seat belts checked regularly by a
PEUGEOT dealer or by a qualified workshop,
particularly if the straps show signs of
damage.
Clean the seat belt straps with soapy water or
a textile cleaning product, sold by PEUGEOT
dealers.
After folding or moving a seat or a rear bench
seat, ensure that the seat belt is positioned
and reeled in correctly. Instructions for children
Use a suitable child seat, if the passenger is
less than 12
years old or shorter than one and
a half metres.
Never use the same seat belt to secure more
than one person.
Never allow a child to travel on your lap.
For more information on Child seats , refer to
the corresponding section.
In the event of an impact
Depending on the nature and seriousness
of the impacts , the pyrotechnic device may
trigger before and independently of airbag
deployment. Deployment of the pretensioners
is accompanied by a slight discharge of
harmless smoke and a noise, due to the
activation of the pyrotechnic cartridge
incorporated in the system.
In all cases, the airbag warning lamp comes
on.
After an impact, have the seat belt system
checked and, if necessary, replaced
by a PEUGEOT dealer or a qualified
workshop.
5
Safety

56
Advice
For the airbags to be fully effective,
observe the safety recommendations
below.
Adopt a normal and upright sitting position.
Wear a correctly adjusted seat belt.
Do not leave anything between the occupants
and the airbags (a child, pet, object, etc.), nor
fix or attach anything close to or in the way of
the airbag release trajectory; this could cause
injuries during their deployment.
Never modify the original definition of your
vehicle, particularly in the area directly
around the airbags.
After an accident or if the vehicle has been
stolen, have the airbag systems checked.
All work on the airbag systems must be
carried out by a PEUGEOT dealer or a
qualified workshop.
Even if all of the precautions mentioned
are obser ved, a risk of injury or of minor
burns to the head, chest or arms when an
airbag is deployed cannot be ruled out. The
bag inflates almost instantly (within a few
milliseconds) then deflates within the same
time discharging the hot gas via openings
provided for this purpose.Front airbags
Do not drive holding the steering wheel by its
spokes or resting your hands on the centre
part of the wheel.
Passengers must not place their feet on the
dashboard.
Do not smoke as deployment of the airbags
can cause burns or the risk of injury from a
cigarette or pipe.
Never remove or pierce the steering wheel or
hit it violently.
Do not fit or attach anything to the steering
wheel or dashboard, this could cause injuries
in case of airbag deployment.
Lateral airbags
Use only approved covers on the seats,
compatible with the deployment of the lateral
airbags. For information on the range of seat
covers suitable for your vehicle, contact a
PEUGEOT


dealer.
Do not attach anything to or hang anything
from the seat backrests (clothes, etc.) as
this could cause injuries to the thorax or arm
when the lateral airbag is deployed.
Do not sit with the upper part of the body any
nearer to the door than necessary. Curtain airbags
Do not attach anything or hang anything to
the roof, as this could cause head injuries
when the curtain airbag is deployed.
If fitted to your vehicle, do not remove the
grab handles installed on the roof, they play a
part in securing the curtain airbags.
Safety

62
Recommended child seats
Range of recommended child seats which are
secured using a three-point seat belt.
Installing a child seat attached with the seat belt
In accordance with European regulations, this table indicates the options for installing child seats
secured using a seat belt and universally approved (a) according to the weight of the child and the
seating position in the vehicle.
Weight of the child/indicative age
Seat position Under 13
kg
(groups 0 (b)
and 0+)
Up to about 1
year old9 -18


kg
(g r o u p 1)
From about 1 to 3
years old15 -25


kg
(group 2)
From about 3 to 6
years old22-36
kg
(group 3)
From about 6 to 10
years old
Front
passenger
seat (c) (e) L1RÖMER Duo
Plus ISOFIX (secured
using the seat belt) X
X
Outer rear seats (d) U
UUU
Group 0+: from bir th to 13

kg
L1
"RÖMER Baby-Safe Plus"
Installed in the rearward facing position.
Groups 2 and 3: from 15 to 36

kg
L5
"RÖMER KIDFIX"
Can be fitted to the vehicle's ISOFIX mountings.
The child is restrained by the seat belt. (a)
Universal child seat: child seat that can
be installed in all vehicles using the seat
belt.
(b) Group 0: from birth to 10
kg. Carry-cots
and car beds cannot be installed on the
front passenger seat. (c)
Refer to the current legislation in your
country before installing your child on
this seat.
(d) To install a child seat at the rear, rear ward
or for ward facing, move the front seat
for ward, then adjust the backrest to an
upright position to allow enough room for
the child seat and the child's legs.
Safety

63
(e)When a rear ward facing child seat is
installed on the front passenger seat , it
is essential to deactivate the passenger’s
airbag. Otherwise, the child would risk
being seriously injured or killed if the
airbag were deployed . When a for ward
facing child seat is installed on the front
passenger seat , the passenger's airbag
must remain activated.
U: Seat suitable for the installation of a
child seat secured using a seat belt and
universally approved, rearward facing
and/or forward facing.
X: Seat not suitable for the installation of a
child seat of the weight group indicated.
Remove and stow the head restraint
before installing a child seat with backrest
on a passenger seat. Refit the head
restraint once the child seat has been
removed.ISOFIX mountings
Your vehicle has been approved in accordance
with the latest ISOFIX regulation.
The seats shown below are fitted with ISOFIX
compliant mountings:
There are three rings for each seat:
-

t
wo rings A , located between the vehicle's
seat backrest and cushion, indicated by a
marking, -

a r
ing B, for fixing the upper strap, called
TOP TETHER and located in the boot.
Its position is indicated by a marking.
The TOP TETHER is used to secure the upper
strap of child seats that have them. This device
limits for ward tipping of the child seat, in the
event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are secured to the two rings A .
Some also have an upper strap which is
attached to ring B .
5
Safety

64
To secure the child seat to the TOP TETHER:
- p ass the child seat strap over the centre of
the vehicle's seat backrest,
-

l
ift the TOP TETHER cover,
-

s
ecure the upper strap fixing to the ring B ,
-

t
ighten the upper strap.The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Strictly obser ve the fitting instructions
provided with the child seat.
For information on the possibilities for installing
ISOFIX child seats in your vehicle, refer to the
summary table.
Recommended ISOFIX child
seats
Also consult the installation guide from the
child seat’s manufacturer to find out how
to install and remove the seat. "
RÖMER Baby- Safe Plus and its ISOFIX
base"
(size category: E )
Group 0+: from bir th to 13 kg
Installed "rearward facing" using an ISOFIX base which is attached to rings A .
The base has a height adjustable support leg that rests on the vehicle's floor.
This child seat can also be secured with a
seat belt. In this case, only the shell is used and attached to the vehicle seat using the three-point seat belt. "
RÖMER Duo Plus ISOFIX "
(size category: B1 )
Group 1: 9-18 kg
Installed only in the "forward facing" position. Attached to rings A and upper ring B ,
referred to as TOP TETHER, using an upper strap.
Three seat body angles: sitting, reclining, lying down.
We recommend the lying down position.
This child seat can also be used on seats not equipped with ISOFIX mountings. In
this case, it must be secured to the vehicle's seat by the three-point seat belt. Adjust the
position of the vehicle's front seat so that the child's feet are not touching the backrest.
Safety

65
Summary table of ISOFIX child seat locations
In line with European regulations, this table indicates the options for installing ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings.
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child
seat next to the ISOFIX logo.
Weight of the child/indicative age
Under 10
kg
(group


0)
Up to about 6 months old Under 10
kg (group 0)
Under 13
kg (group 0+)
Up to about 1 year old 9-18
kg (group 1)
From about 1 to 3 years old
Type of ISOFIX child seat Carr y- cot*"Rearward facing " "Rearward facing " "Forward facing "
ISOFIX size categor y F G C D E C D A B B1
ISOFIX universal and semi-
universal child seats which can be installed on the rear outer seats X
X X RÖMER
BabySafe Plus
ISOFIX X X
IUF
*

C
arry-cots and car beds cannot be installed
on the front passenger seat.
I UF:
seat suitable for the installation of an
Isofix U niversal seat, " For ward facing",
secured using the top tether.
X: seat which is not suitable for the
installation of an ISOFIX seat of the size
category indicated. Remove and stow the head restraint
before installing a child seat with backrest
on a passenger seat. Refit the head
restraint once the child seat has been
removed.
5
Safety

66
Advice on child seats
The incorrect installation of a child seat in a
vehicle compromises the child's protection in
the event of an accident.
Ensure that there is no seat belt or seat belt
buckle under the child seat, as this could
destabilise it.
Remember to fasten the seat belts or the
child seat harnesses keeping the slack
relative to the child's body to a minimum,
even for short journeys.
When installing a child seat using the seat
belt, ensure that the seat belt is tightened
correctly on the child seat and that it secures
the child seat firmly on the seat of your
vehicle. If your passenger seat is adjustable,
move it for wards if necessary.
At rear seating places, always leave sufficient
space between the front seat and:
-

a "
rear ward facing" child seat,
-

t
he feet of a child seated in a "for ward
facing" child seat.
To do this, move the front seat for wards
and, if necessary, move its backrest into the
upright position. For optimal installation of the "forward facing"
child seat, verify that its backrest is as close
as possible to the backrest of the vehicle
seat, or if possible in contact with it.
You must remove the head restraint before
installing a child seat with backrest on
a passenger seat. Ensure that the head
restraint is stored or attached securely to
prevent it from being thrown around the
vehicle in the event of sharp braking. Refit the
head restraint when the child seat is removed.
Installing a booster seat
The chest part of the seat belt must be
positioned on the child's shoulder without
touching the neck.
Ensure that the lap part of the seat belt
passes correctly over the child's thighs.
PEUGEOT recommends using a booster seat
with a backrest, equipped with a belt guide at
shoulder level.
As a safety precaution, do not leave:
-

a c
hild or children alone and unattended in
a vehicle,
-

a c
hild or an animal in a car which is
exposed to the sun, with the windows
closed,
-

t
he keys within reach of children inside the
vehicle.
To prevent accidental opening of the doors
and rear windows, use the child lock.
Take care not to open the rear windows by
more than one third.
To protect young children from the rays of the
sun, fit side blinds on the rear windows.
Children in the front
The legislation on carrying a child on the front
passenger seat is specific to each country.
Refer to the legislation in force in your
c o u nt r y.
Deactivate the passenger airbag when a
"rear ward facing" child seat is installed on the
front passenger seat. Otherwise, the child
may be seriously injured or killed were the
airbag to be deployed.
Safety

77
If, as an exception, you have to interrupt
the charge by disconnecting the charging
cable from the wall-mounted power point,
it is essential to first press the Manual
Stop button on the control unit.
Control unit
- POWER : lit green.
It indicates that the electrical connection is
secured. If it does not light up, check that
the connections are correct. If the problem
persists, contact a PEUGEOT dealer or a
qualified workshop.
-

F
A U LT : lit red.
It indicates that there is a fault. Check that the
connections are correct. If this indicator lamp
does not go out, contact a PEUGEOT dealer
or a qualified workshop.
-

C
HARGING : lit green.
It indicates that charging is under way. If it
does not light up, check that the connections
are correct. If the problem persists, contact a
PEUGEOT dealer or a qualified workshop.
This type of control unit is equipped with an
electric socket detection system (depending on
the country). It detects the amperage that your The charging warning lamp in the instrument
panel going off and the flashing of the green
CHARGING
warning lamp indicate that
charging is complete.
F
P
ress the button to release the charging
plug.
F
R
efit the protective cover on the charging
cable.
F
C
lose the socket cover, then the access
flap.
F D isconnect the charging cable from the
power point.
F

S
tore the charging cable in the bag supplied
for this purpose.
It has four indicator lamps:
- S TOP: lit red.
It indicates that charging has been interrupted
by pressing the Manual Stop button. This
action is essential before disconnecting the
charging cable from the wall-mounted power
point during recharging.
domestic power point is able to support and
chooses the most suitable amperage for safe
recharging:
- 14 A (FAST): if your power supply supports it.- 8 A (NORMAL): if your power supply is
standard.
7
Practical information

84
Closing
F Take the support stay out of the support slot.
F

R
eplace the support stay in its housing.
F

L
ower the bonnet and drop it near the end
of its travel.
F

P
ull on the bonnet to check that it is fully
latched.
Do not press down on the centre of the
bonnet if not properly latched, as this
could deform it. Instead, re-open the
bonnet completely and close it again.
Front compartment
1. Screenwash fluid reservoir.
2. Heating system fluid reservoir.
3. Brake fluid reser voir.
4. Ancillaries battery.
5. Fusebox.
In order to avoid damaging the electrical
units, it is expressly prohibited to use
high pressure washing to clean the front
compartment.
Rear compartment
Located below the boot floor, this compartment
provides access to the coolant reser voir.
F
O
pen the boot.
F

D
etach the adhesive strap securing the
carpet.
F

R
emove the boot carpet.
F

R
emove the four "butter fly" screws.
F

R
emove the protective cover.
Practical information