ESP Peugeot iOn 2018 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2018, Model line: iOn, Model: Peugeot iOn 2018Pages: 136, PDF Size: 5.79 MB
Page 2 of 136
Access to the Handbook
The Handbook is available on the PEUGEOT website,
in the "Personal space" section or at the following
address:
http://public.servicebox.peugeot.com/ddb/
Direct access to the Handbook .
Select:
-
t
he language,
-
t
he vehicle, its body style,
-
t
he print edition of your handbook corresponding to the date of 1
st
registration of your vehicle.
This symbol indicates the latest information
available.
Then select:
-
t
he vehicle,
-
t
he print edition corresponding to the date of 1
st registration of
your vehicle.
Download the content of the vehicle's Handbook .
From the appropriate Store, download the Scan
MyPeugeot APP
smartphone application.
Page 10 of 136
8
Warning lamps
When the engine is running or the vehicle is
being driven, the lighting of one of the following
warning lamps indicates a fault which requires
action on the part of the driver.
Any fault resulting in the lighting of a warning
lamp must be investigated further.
If you encounter any problems, contact a
PEUGEOT dealer or a qualified workshop.
Operation indicator lamps
The lighting of one of the following indicator
lamps confirms that the corresponding system
is on.
This may be accompanied by an audible signal.
Deactivation indicator lamps
If one of the following indicator lamps comes
on, this confirms that the corresponding system
has been switched off intentionally.
This may be accompanied by an audible signal.
Dashboard instruments
Page 12 of 136
10
Warning/indicator lampStateCause Action/Observations
Door(s) open/Boot
open Fixed, accompanied
by an audible signal. A door or the boot is still open. Close the door or boot.
Parking brake Fixed. The parking brake is applied or
not properly released. Release the parking brake to switch off the warning
light, keeping your foot on the brake pedal.
Observe the safety recommendations.
For more information on the Parking brake
, refer to
the corresponding section.
Braking Fixed. The brake fluid level has
dropped significantly.
There is a braking assistance
system fault. Stop as soon as it is safe to do so.
Top up with brake fluid approved by PEUGEOT.
If the problem persists, have the system checked by a
PEUGEOT dealer or a qualified workshop.
+ Fixed, associated
with the ABS warning
lamp.
The electronic brake force
distribution (EBFD) system is
faulty. You must stop as soon as it is safe to do so.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
Anti-lock Braking
System (ABS) Fixed.
The anti-lock braking system
has a fault. The vehicle retains conventional braking capabilities.
Drive carefully at reduced speed and contact a
PEUGEOT dealer or a qualified workshop without
d e l ay.
Orange warning/indicator lamps
Dashboard instruments
Page 14 of 136
12
Under-inflationFixed. The pressure in one or more of
the tyres is too low. Check the pressure in the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
You must reinitialise the system after adjusting one or
more tyre pressures and after changing one or more
wheels.
For more information on Tyre under-inflation
detection
, refer to the corresponding section.
Flashing, then fixed. The function is faulty and/or at
least one of the wheels has no
sensor detected. Tyre pressure monitoring is no longer ensured.
Have the system checked by a Peugeot dealer or a
qualified workshop.
Warning/indicator lamp
StateCause Action/Observations
Main electrical
system self-
diagnostic system Fixed.
Fault in the main electrical
system. You must stop as soon as it is safe to do so.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
Passenger's airbag
system Fixed, in the central
console.
The control switch, located in the
glove box or in the central console
(depending on equipment), is set
to the "
OFF" position.
The passenger's front airbag is
deactivated.Set the control switch to the " ON" position to activate
the passenger's front airbag.
In this case, do not install a "rear ward facing" child
seat on the front passenger seat.
Remember to check the status of this control switch
before starting your vehicle.
Rear foglamp Fixed. The rear foglamp has been
switched on using the ring on the
lighting control stalk. Turn the ring on the lighting control stalk to the rear to
switch off the rear foglamp.
Dashboard instruments
Page 17 of 136
15
In cold weather, the capacity to regenerate
through braking is reduced.
Total distance recorder "Charge" zone
The needle moves to the left, in proportion to
the level of charge going into the main battery,
during periods of deceleration and braking.
Instrument panel display
screen
When the switch is in the "ON" position, you
can display various information on the screen
by successively pressing button A .
System which measures the total distance
travelled by the vehicle during its life. Press button A
.
The total distance appears in the display.
Switching the speedometer unit
When the total distance recorder is displayed,
hold button A down for a few seconds to
change the speedometer unit (mph or km/h).
When remaining range indicator is displayed in
the unit (miles or km) corresponding to that of
the speedometer unit (mph or km/h).
Trip distance recorder
(trip
A o
r B)
These two trips indicate the distance travelled
since the trip recorder was last reset. Press button A to display the desired trip.
Reset
With the ignition on, when one of the trips A or
B is displayed, press the button for more than
two seconds.
1
Dashboard instruments
Page 20 of 136
18
Choice of set of tyres fitted
If you have registered a second set of tyres
with sensor, after every change, select the
corresponding set in the instrument panel
display screen.
The procedure for this is as follows.
F
P
ress button A to select the system.
F
P
ress and hold button A for more than ten
seconds to move from tyre set 1 to tyre
set
2 in succession or vice versa.
Range indicator
This function provides you with an estimated
range that your vehicle can still travel, taking
into account your recent conditions of use
(driving style, use of heating, air conditioning,
e t c .) .When the remaining range is too low, " ---"
is displayed in the instrument panel.
The remaining range can be displayed in
miles or kilometres.
For more information on the distance
recorder , and the unit change in
particular, refer to the corresponding
section.
Dashboard instruments
Page 23 of 136
21
Doors
Opening
From outside
F After unlocking the vehicle using the remote control or the key, pull the door
handle.
From inside
F Pull the front or rear door control to open the door.
If the doors are locked:
-
o
pening the driver's door unlocks the other
doors,
-
t
he front passenger door or the rear doors
must first be manually unlocked using the
lock control before being opened.
Closing
If a door or the boot is not properly
closed, this warning lamp comes
on in the instrument panel until the
relevant door or the boot is closed.
Locking/unlocking from
inside
F Push the driver's door button for wards to lock or rear wards to unlock the entire
vehicle. The front and rear passenger door buttons
lock /unlock only the corresponding door.
Boot
Opening
F After unlocking the vehicle using the
remote control or the key, press the
handle
A, then raise the tailgate.
2
Access
Page 24 of 136
22
Closing
F Pull the handle B and guide the tailgate downwards.
F
R
elease the handle and gently press on the
outside sur face of the tailgate to close it.
Electric windows
System designed for opening or closing a
window manually or automatically. Equipped
with a deactivation system to prevent misuse of
the rear controls. 1.
Driver's electric window.
2. Passenger's electric window
3. Rear right electric window.
4. Rear left electric window.
5. Deactivating the passenger and rear
window controls.
Operation
With the ignition on:
F
P ress the control to open or pull it to close,
without passing the point of resistance.
The window stops as soon as the control is
released. The electric window controls remain
operational for approximately 30
seconds
after switching off the ignition.
The windows can no longer be opened or
closed once the driver's door is closed.
Deactivating the passenger and
rear window controls
F For your children's safety, press control 5 to deactivate the passenger and rear window
controls irrespective of their position.
If the button is pushed, operation is deactivated.
If the button is raised, operation is reactivated.
Automatic mode (driver's side)
F P ress the control beyond the point of
resistance to open. The driver's window
opens fully when the control is released.
F
P
ressing the control again stops the
movement of the window.
Access
Page 25 of 136
23
Always remove the key from the ignition
when leaving the vehicle, even for a short
time.
In the event of contact during operation of
the electric windows, you must reverse the
movement of the window. To do this, press
the corresponding control.
When operating the passenger electric
window switches, the driver must ensure
that no-one is preventing correct closing
of the windows.
The driver must ensure that the
passengers use the electric windows
c o r r e c t l y.
Be aware of children when operating the
windows.
Charging flaps
Normal charging
F Pull control A in the lower part of the dashboard, driver's side, to unlock the
access flap.
F
O
pen the access flap on the right-hand
side of the vehicle.
F
P
ress on latch B to open the socket cover.
Fast charging
(Depending on equipment.) F
P
ull control C under the driver's seat, near
the door, to unlock the access flap.
F
O
pen the access flap on the left-hand side
of the vehicle.
F
P
ress on latch D to open the socket cover.
For more information on Recharging the
main battery , refer to the corresponding
section.
2
Access
Page 28 of 136
26
Folding the backrest
1.Place the head restraints in the low
position or remove them if necessary.
2. Pull the control for wards to release the
seat backrest.
3. Tilt the backrest for wards.
Returning the backrest to the normal position
When returning the seat backrest to its
normal position, take care not to trap the
seat belts and their buckles.
Mirrors
Door mirrors
Adjustment
Adjustment is possible when the switch is in
position "ON" or "ACC".
F
M
ove control A to the right or to the left to
select the corresponding mirror.
F
M
ove control B in any of the four directions
to adjust the mirror.
After adjustment, return control A to the central
position.
F Put the seat backrest in the upright position and lock it in place.
F
R
efit or put the head restraints back in place.
Ease of use and comfort