cooling Peugeot iOn 2018 Owner's Manual

37
One of these symbols is displayed on the
screen. It tells you the current status of the
thermal comfort.
Use the arrows to select the desired function.
Press the on/off button briefly to send the data
to the vehicle.
Available functions Function activation
Switch on the remote control.
Press the MODE button to select the thermal
comfort programming.Cooling: running the air
conditioning and ventilation in the
passenger compartment using
the central air vents.
Heating: running the heating in
the passenger compartment and
the ventilation via the inside air
vents. The driver's seat heating
will also be activated if the
function was activated. Demisting: running the
demisting/defrosting of the rear
screen and the door mirrors
(depending on version), the
ventilation and heating in the
passenger compartment, via the
side air vents, and the driver's
seat heating, if the function was
activated.
Deactivating the thermal comfort
programming function and
cancelling the programming.
Battery charge indicator
You can use the remote control to check the
main battery charge status.
Battery full.
Battery half-charged.
Battery low.
Battery empty.
Changing batteries
Batter y type: CR2032
Unclip the case and change the two batteries.
Do not throw away used batteries, take
them to an approved collection point.
3
Ease of use and comfort

86
Rear compartment
Coolant level
The level of this fluid must be
between the "L" (MIN) and "F"
(MA X) marks.
As the cooling system is pressurised, wait at
least one hour after switching off the motor
before carrying out any work.
To avoid any risk of burns, unscrew the cap by
two turns to allow the pressure to drop. When
the pressure has dropped, remove the cap and
top up the level.
Changing the fluid
This fluid does not need to be changed.
Checks
Passenger compartment filter
Depending on the environment
(e.g. dusty atmosphere) and the
use of the vehicle (e.g. city driving),
replace it twice as often if
necessary .
A clogged passenger compartment filter may
have an adverse effect on the per formance
of the air conditioning system and generate
undesirable odours.
Brake pads
Brake wear depends on the style
of driving, particularly in the case
of vehicles used in town, over short
distances. It may be necessary to
have the condition of the brakes
checked, even between vehicle
services.
Ancillaries battery electrolyte
level
To check this level, you must remove the
battery cover.
For more information on the ancillaries
battery , refer to the corresponding section.
The level of this fluid must be between the
"LOWER LEVEL" (MIN) and "UPPER LEVEL"
(MA X) marks.
If necessary, top up with distilled water by
removing the plugs from the battery’s different
compartments.
Check the electrolyte level at least once
a month. Unless otherwise indicated, check these
components in accordance with the
manufacturer's service schedule.
Other wise, have them checked by a PEUGEOT
dealer or a qualified workshop. Unless there is a leak in the circuit, a drop in
the brake fluid level indicates that the brake
pads are worn.
Brake disc/drum wear
For information on checking
brake disc/drum wear, contact a
PEUGEOT dealer or a qualified
workshop.
Practical information