key Peugeot iOn 2018 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2018, Model line: iOn, Model: Peugeot iOn 2018Pages: 136, PDF Size: 5.79 MB
Page 3 of 136
Welcome
Thank you for choosing a Peugeot iOn.
This document presents the information and recommendations required
for you to be able to explore your vehicle in complete safety.
Your vehicle will be fitted with only some of the equipment described in
this document, depending on its trim level, version and the specification
for the country in which it was sold.In this document you will find all of the instructions and
recommendations on use that will allow you to enjoy your vehicle to the
fullest. It is strongly recommended that you familiarise yourself with it,
as well as the Warranty and Maintenance Record which will provide you
with information about warranties, servicing and roadside assistance
associated with your vehicle.
The descriptions and illustrations are given without any obligation.
Automobiles PEUGEOT reser ves the right to modify the technical
specifications, equipment and accessories without having to update this
edition of the guide.
If ownership of your vehicle is transferred, please ensure this Complete
Handbook is passed on to the new owner. Key
Safety warning
Additional information
Contributes to the protection of the environment
Left-hand drive vehicle
Right-hand drive vehicle
Page 4 of 136
2
.
.
Instrument panel 7
W arning and indicator lamps 7
M
ain battery state of charge indicator
1
4
Energy consumption/generation indicator
1
4
Instrument panel display screen
1
5
Instruments and controls
4
R
emote control key
1
9
Doors
21
Boot
2
1
Electric windows
2
2
Charging flaps
2
3
Front seats
2
4
Rear seats
2
5
Mirrors
26
Interior fittings
2
7
Ventilation
2
9
Recommendations for ventilation and air
conditioning
3
0
Heating
3
1
Air conditioning
3
2
Front demist – defrost
3
4
Rear screen demist – defrost
3
4
Remote control
3
4Lighting control stalk
4
0
Headlamp beam height adjustment
4
2
Wiper control stalk
4
2
Courtesy lamp
4
3
General safety recommendations
4
5
Hazard warning lamps
4
6
Brake lamps, automatic operation
4
6
Horn
46
Horn for pedestrians
4
6
Emergency or assistance call
4
7
Braking assistance systems
4
8
Trajectory control systems
4
9
Engine brake reduction indicator lamp
5
0
Seat belts
5
1
Airbags
54
Child seats
5
7
Deactivating the passenger's front airbag
5
8
ISOFIX mountings and child seats
6
3
Advice on child seats
6
6
Child lock
6
7
Over view
Dashboard instruments Access
Ease of use and comfort Safety
Lighting and visibility
Eco-driving
Contents
Page 21 of 136
19
Remote control key
System used to lock or unlock the vehicle's
central locking system with a key or remotely.
It also starts the vehicle and provides anti-theft
protection.
Unfolding/folding the key
F Press button A to unfold or fold the key.
Unlocking the vehicle
Unlocking using the remote
control
F Press the open padlock button to unlock the vehicle.
Unlocking is confirmed by illumination of the
interior courtesy lamp for about 15
seconds
and the direction indicators flashing twice.
Unlocking using the key
F Turn the key towards the right in the
driver's door lock to unlock the vehicle.
Unlocking is confirmed by illumination of the
interior courtesy lamp for about 15
s
econds and
the direction indicators flashing twice .
However, the door mirrors do not unfold.
The passenger door lock does not allow
the locking or unlocking of the other doors
and/or of the boot.
The vehicle will lock again automatically
after thirty seconds unless a door or the
boot is opened. This mechanism helps
avoid unlocking by mistake.
Locking the vehicle
The door mirrors unfold at the same time
(depending on version).
Normal locking using the remote
control
F Press the closed padlock button to lock the vehicle. Locking is confirmed by the direction indicators
flashing once
.
The door mirrors fold at the same time
(depending on version).
Normal locking using the key
F Turn the key towards the left in the driver's door lock to lock the vehicle.
Locking is confirmed by the direction indicators
flashing once .
However, the door mirrors do not fold.
Anti-theft protection
Electronic immobiliser
The key contains an electronic chip which has
a specific code. When the ignition is switched
on, this code must be recognised to enable the
vehicle to start.
This electronic immobiliser locks the motor
management system a few minutes after the
ignition is switched off and prevents the engine
being started by anyone who does not have
t h e key.
In the event of a fault, or if your vehicle does
not start, contact a PEUGEOT dealer as soon
as possible.
2
Access
Page 22 of 136
20
In the event of a fault with the remote control,
you can no longer unlock or lock your vehicle.
F
F
irst of all, use the key in the driver's door
lock to unlock or lock your vehicle.
F
S
econdly, ask a PEUGEOT dealer to check
the operation of the remote control and to
replace the battery if necessary. Lost keys
See a PEUGEOT dealer with the vehicle
registration certificate and your ID.
A PEUGEOT dealer can retrieve the key
code and the transponder code to order the
replacement key.
Remote control problemAnti-theft protection
Do not make any modifications to the
electronic vehicle immobiliser system; this
could cause malfunctions.
Remote control
The high frequency remote control is a
sensitive system; do not operate it while
it is in your pocket as there is a possibility
that it may unlock the vehicle without you
being aware of it.
Do not repeatedly press the buttons of
your remote control when out of range and
out of sight of your vehicle, as it may stop
working.
The remote control does not operate when
the key is in the ignition, even when the
ignition is switched off.
Locking the vehicle
Driving with the doors locked may make
access to the passenger compartment by
the emergency ser vices more difficult in an
emergency.
As a safety precaution (with children on
board), remove the key from the ignition
when leaving the vehicle, even for a short
time. When purchasing a second-hand vehicle
Have the key codes memorised by a
PEUGEOT dealer, to ensure that the keys in
your possession are the only ones which can
start the vehicle.
Access
Page 23 of 136
21
Doors
Opening
From outside
F After unlocking the vehicle using the remote control or the key, pull the door
handle.
From inside
F Pull the front or rear door control to open the door.
If the doors are locked:
-
o
pening the driver's door unlocks the other
doors,
-
t
he front passenger door or the rear doors
must first be manually unlocked using the
lock control before being opened.
Closing
If a door or the boot is not properly
closed, this warning lamp comes
on in the instrument panel until the
relevant door or the boot is closed.
Locking/unlocking from
inside
F Push the driver's door button for wards to lock or rear wards to unlock the entire
vehicle. The front and rear passenger door buttons
lock /unlock only the corresponding door.
Boot
Opening
F After unlocking the vehicle using the
remote control or the key, press the
handle
A, then raise the tailgate.
2
Access
Page 25 of 136
23
Always remove the key from the ignition
when leaving the vehicle, even for a short
time.
In the event of contact during operation of
the electric windows, you must reverse the
movement of the window. To do this, press
the corresponding control.
When operating the passenger electric
window switches, the driver must ensure
that no-one is preventing correct closing
of the windows.
The driver must ensure that the
passengers use the electric windows
c o r r e c t l y.
Be aware of children when operating the
windows.
Charging flaps
Normal charging
F Pull control A in the lower part of the dashboard, driver's side, to unlock the
access flap.
F
O
pen the access flap on the right-hand
side of the vehicle.
F
P
ress on latch B to open the socket cover.
Fast charging
(Depending on equipment.) F
P
ull control C under the driver's seat, near
the door, to unlock the access flap.
F
O
pen the access flap on the left-hand side
of the vehicle.
F
P
ress on latch D to open the socket cover.
For more information on Recharging the
main battery , refer to the corresponding
section.
2
Access
Page 44 of 136
42
Automatic illumination/
switching off of the headlamps
Automatic illumination
When the lighting control stalk ring is in
the AUTO position, the sidelamps and
dipped beam headlamps are switched on
automatically, without any action on the part of
the driver, when a low level of ambient light is
detected.
As soon as the level of light becomes sufficient
again, the lights are switched off automatically.
The sensor is located at the bottom of the
windscreen.
Do not cover the sunshine sensor, as the
associated functions would no longer be
controlled.
In fog or snow, the sunshine sensor may
detect sufficient light. The headlamps may
not come on automatically.
Automatic switching off
When the lighting control stalk is in the "AUTO"
position, if the ignition key is in the "LOCK" or
"ACC" position or is removed, the headlamps
will automatically switch off when the driver's
door is opened .
Headlamp beam height
adjustment
To avoid causing a nuisance to other road
users, the height of the halogen headlamp
beams must be adjusted according to the load
in the vehicle.
0.Driver only or driver + 1 front
passenger.
1 or 2. 4 passengers (including driver).
3. 4 passengers (including driver) +
maximum authorised load.
4. Driver + maximum authorised load.
The initial setting is position " 0".
Wiper control stalk
The wipers are controlled directly by the driver
using control A and ring B .
In wintry conditions, remove snow, ice
or frost present on the windscreen,
around the wiper arms and blades and
the windscreen seal before operating the
wipers.
Do not operate the wipers on a dry
windscreen. Under extremely hot or cold
conditions, ensure that the wiper blades
are not stuck to the windscreen before
operating the wipers.
Lighting and visibility
Page 61 of 136
59
The warning label present on both sides of the
passenger's sun visor repeats this advice.
In line with current legislation, this warning is
available in all of the languages required on the
following pages.
Passenger airbag OFF Deactivation
Only the passenger's front airbag can be
deactivated.
F
W
ith the ignition off , insert the key in the
passenger airbag deactivation switch,
F
T
urn it to the " OFF" position,
F
R
emove the key.
When the ignition is on, this warning lamp
comes on in the central console and stays on
for as long as the airbag is deactivated. To ensure the safety of your child, the
passenger's airbag must be deactivated
when you install a "rear ward facing" child
seat on the front passenger seat.
Otherwise, the child would risk being
seriously injured or killed should the
airbag be deployed.
Reactivation
When you remove the child seat, turn the
switch to the ON
position to reactivate the
airbag and so to ensure the safety of your front
passenger in the event of an impact.
The associated warning lamp goes off.
For more information on the Airbags ,
refer to the corresponding section.
5
Safety
Page 68 of 136
66
Advice on child seats
The incorrect installation of a child seat in a
vehicle compromises the child's protection in
the event of an accident.
Ensure that there is no seat belt or seat belt
buckle under the child seat, as this could
destabilise it.
Remember to fasten the seat belts or the
child seat harnesses keeping the slack
relative to the child's body to a minimum,
even for short journeys.
When installing a child seat using the seat
belt, ensure that the seat belt is tightened
correctly on the child seat and that it secures
the child seat firmly on the seat of your
vehicle. If your passenger seat is adjustable,
move it for wards if necessary.
At rear seating places, always leave sufficient
space between the front seat and:
-
a "
rear ward facing" child seat,
-
t
he feet of a child seated in a "for ward
facing" child seat.
To do this, move the front seat for wards
and, if necessary, move its backrest into the
upright position. For optimal installation of the "forward facing"
child seat, verify that its backrest is as close
as possible to the backrest of the vehicle
seat, or if possible in contact with it.
You must remove the head restraint before
installing a child seat with backrest on
a passenger seat. Ensure that the head
restraint is stored or attached securely to
prevent it from being thrown around the
vehicle in the event of sharp braking. Refit the
head restraint when the child seat is removed.
Installing a booster seat
The chest part of the seat belt must be
positioned on the child's shoulder without
touching the neck.
Ensure that the lap part of the seat belt
passes correctly over the child's thighs.
PEUGEOT recommends using a booster seat
with a backrest, equipped with a belt guide at
shoulder level.
As a safety precaution, do not leave:
-
a c
hild or children alone and unattended in
a vehicle,
-
a c
hild or an animal in a car which is
exposed to the sun, with the windows
closed,
-
t
he keys within reach of children inside the
vehicle.
To prevent accidental opening of the doors
and rear windows, use the child lock.
Take care not to open the rear windows by
more than one third.
To protect young children from the rays of the
sun, fit side blinds on the rear windows.
Children in the front
The legislation on carrying a child on the front
passenger seat is specific to each country.
Refer to the legislation in force in your
c o u nt r y.
Deactivate the passenger airbag when a
"rear ward facing" child seat is installed on the
front passenger seat. Otherwise, the child
may be seriously injured or killed were the
airbag to be deployed.
Safety
Page 71 of 136
69
Starting
F Check that the drive selector is in position P.
F I nsert the key in the ignition switch.
F
T
urn the key to position 4 (S TA R T ) .
F
H
old the key in that position
for a few seconds until the
" RE ADY " indicator lights up and
an audible signal sounds.
F
R
elease the key.
The switch will automatically return to
position 3 (ON) .
Switching off
F Immobilise the vehicle.
F
K eep your foot on the brake pedal.
F
P
lace the drive selector in position P .
F
A
pply the parking brake.
F
T
urn the key to position 1 (LOCK) .
F
R
emove the key from the ignition switch.
Avoid attaching heavy objects to the key,
which would weigh down on its blade
in the ignition switch and could cause a
malfunction.
Parking brake
Application
F Pull the parking brake lever fully up to immobilise your vehicle.
Release
F Pull the parking brake lever up gently, press the release button then lower the lever fully.
When the vehicle is moving, if the
brake remains applied or is not fully
released, this warning lamp comes on.
When parking on a slope, direct your
wheels against the kerb, apply the parking
brake, put the drive selector in position P
and switch off the ignition.
Drive selector
Selector positions
P. Park.
This position allows you to start the
vehicle.
To exit position P , you must have your
foot on the brake.
R. Reverse.
N. Neutral.
D. Drive (forward).
Displays in the instrument panel
When you move the drive selector in the gate
to select a position, the corresponding symbol
appears in the instrument panel.
6
Driving