technical specifications Peugeot iOn 2018 Owner's Manual

Welcome
Thank you for choosing a Peugeot iOn.
This document presents the information and recommendations required
for you to be able to explore your vehicle in complete safety.
Your vehicle will be fitted with only some of the equipment described in
this document, depending on its trim level, version and the specification
for the country in which it was sold.In this document you will find all of the instructions and
recommendations on use that will allow you to enjoy your vehicle to the
fullest. It is strongly recommended that you familiarise yourself with it,
as well as the Warranty and Maintenance Record which will provide you
with information about warranties, servicing and roadside assistance
associated with your vehicle.
The descriptions and illustrations are given without any obligation.
Automobiles PEUGEOT reser ves the right to modify the technical
specifications, equipment and accessories without having to update this
edition of the guide.
If ownership of your vehicle is transferred, please ensure this Complete
Handbook is passed on to the new owner. Key
Safety warning
Additional information
Contributes to the protection of the environment
Left-hand drive vehicle
Right-hand drive vehicle

109
Identification markings
Various visible markings for the identification of
your vehicle.B. Tyre identification label.
This label is affixed to the centre pillar on the
driver’s side.
It bears the following information:
-

t
he tyre inflation pressures (in bars),
-
t

he tyre specifications,
-

t
he tyre type.
C. Manufacturer's plate.
This plate is affixed by rivets to the centre pillar
on the left-hand side.
D. VIN (Vehicle Identification Number).
This number is engraved on the wheel arch,
inside the boot on the right-hand side.
A. After- Sales – Replacement Par ts
identification plate.
This plate is affixed by rivets on the inner side
of the front bonnet.
It includes the following information:
-

t
he model of the vehicle,
-

t
he paint code,
-

t
he type, variant, version, etc. (model code). The vehicle may be originally equipped
with tyres with higher load and speed
indices than those indicated on the label,
without affecting inflation pressure.
Checking tyre pressures
The tyre pressures should be checked when
cold at least monthly.
The pressures given on the label are valid for
cold tyres. If you have driven for more than
10
minutes or more than 6 miles (10 kilometres)
at more than 30
mph (50 km/h), the tyres will be
warm; in this case 0.3
bar (30 kPa) should be
added to the pressures given on the label. Never reduce the pressure of a warm tyre.
Insufficient tyre pressure increases
the electric power consumption of your
vehicle, thus reducing its range.
9
Technical data