seats Peugeot RCZ 2011 Owner's Manual

CONTENTS
2
ECO-DRIVING 20-21
Direction indicators 99
Hazard warning lamps 99
Emergency or assistance call 100
Horn 100Tyre under-inflation detection 100
Braking assistance systems 102
Trajectory control systems 103
Active bonnet 105Active spoiler 106
Front seat belts 108
Airbags 111
Child seats 116 Front seats 63
Steering wheel adjustment 67
Mirrors 68
Rear seats 71
Ventilation 72Dual-zone digital air conditioning 74
Rear screen demist - defrost 76
Courtesy lamp 77
Interior mood lighting 78Interior fittings 80
Front armrest 83
Boot fittings 86
Lighting controls 88
Automatic illumination of headlamps 92Headlamp adjustment 93
Directional lighting 94Wiper controls 95
Automatic rain sensitive wipers 97
FAMILIARISATION 4-19
1/INSTRUMENTS AND CONTROLS 22-49
2/ACCESS 50-62
3/EASE OF USE AND COMFORT 63-87
4/VISIBILITY 88-98
5/SAFETY 99-123
Remote control key 50
Alarm 54Electric windows 57
Doors 59Boot 62 Instrument panels 22
Warning and indicator lamps 26
Indicators 33Instrument panel buttons 37
Clock 38
Trip computer 39
Monochrome screen C (Peugeot Connect Sound) 4216/9 high defi nition retractable colour screen
(Peugeot Connect Media) 46

FAMILIARISATION
SITTING COMFORTABLY


FRONT SEATS


Forwards-backwards
Height


MANUAL ADJUSTMENTS

63
64


ELECTRIC ADJUSTMENTS


Seat back angle

12
SITTING COMFORTABLY

FRONT SEATS

83


Other functions available...

Lumbar adjustment.
As a safety precaution, these
operations must only be carried out
when stationary. Heated seats. 65
65


STEERING WHEEL ADJUSTMENT



1.
Unlock the control.

2.
Adjust for height and reach.

3.
Lock the control.
67


FRONT ARMREST

For your comfort, the height and the
longitudinal position of the front armrest can
be adjusted.
It also offers a storage compartment. Storing of driving positions (driver's electric
seat).
66

FAMILIARISATION



- Insert the tongue A
in the buckle A
in the
middle of the rear seat.

- Insert the tongue B
in the outer buckle B
.


REAR SEAT BELTS

109



FOLDING DOWN THE REAR
BACKREST
71

1.
Release the backrest by pulling the
handle from the boot.
71


ACCESS TO THE REAR SEATS



1.
Releasing the backrest.

2.
Tilting the backrest.

AT THE REAR


2.
Fold the backrest onto the seat cushion
from the passenger compartment. Press the red button B
then the black button A

to remove the seat belt. The control giving access to the rear
seats does not release the seat.

LIMIT THE CAUSES OF
EXCESS CONSUMPTION

Spread loads throughout the vehicle; place
the heaviest items in the bottom of the boot,
as close as possible to the rear seats.
Limit the loads carried in the vehicle and
reduce wind resistance (roof bars, roof rack,
bicycle carrier, trailer...). Use a roof box in
preference.
Remove roof bars and roof racks after use.

At the end of winter, remove snow tyres and
refi t your summer tyres.


OBSERVE THE RECOMMENDATIONS
ON MAINTENANCE

Check the tyre pressures regularly, when cold,
referring to the label in the door aperture,
driver's side.
Carry out this check in particular:


- before a long journey,

- at each change of season,

- after a long period out of use.
Don't forget the spare wheel and the tyres on
any trailer or caravan.

Have your vehicle serviced regularly (engine
oil, oil fi lter, air fi lter...) and observe the
schedule of operations recommended by the
manufacturer.


When refuelling, do not continue after the 3 rd

cut-off of the nozzle to avoid any overfl ow.

At the wheel of your new vehicle, it is only
after the fi rst 1 800 miles (3 000 kilometres)
that you will see the fuel consumption settle
down to a consistent average.

3/
EASE OF USE AND COMFORT








FRONT SEATS

Seat with integral head restraint, consisting of a seat cushion and a seat
back which can be adjusted to adapt your position for ease of driving
and comfort.

MANUAL ADJUSTMENTS


Forwards-backwards adjustment
Driver's or passenger's seat height adjustment

Seat back angle adjustment



)
Raise the control bar and slide the seat forwards or backwards.


)
Pull the control lever upwards to raise or push it downwards to
lower, as many times as necessary, to obtain the position required.



)
Turn the knob to set the angle required.

64











FRONT SEATS

Seat with integral head restraint, consisting of a seat cushion and a seat
back which can be adjusted to adapt your position for ease of driving
and comfort.


ELECTRIC ADJUSTMENTS


Forwards-backwards adjustment
Seat cushion height adjustment



)
Push the control forwards or rearwards to slide the seat.


)
Tilt the rear part of the control upwards or downwards to obtain the
required height.

The electrical functions of the seat are deactivated approximately
one minute after the ignition is switched off.
To reactivate them, switch on the ignition.



Seat back angle adjustment



)
Tilt the control forwards or rearwards to adjust the angle of the seat
back.

3/
EASE OF USE AND COMFORT


Lumbar adjustment



)
Turn the dial to obtain the correct lumbar position.













Heated seats control

With the engine running, the front seats can be heated separately.


)
Use the adjustment dial, placed on the side of each front seat, to
switch on and select the level of heating required:

0
:
Off.

1
:
Low.

2
:
Medium.

3
:
High.

3/
EASE OF USE AND COMFORT

ACCESS TO THE REAR SEATS












REAR SEATS

Two-seat bench with one-piece fi xed seat cushion and one-piece folding
backrest.
The rear headrests are fi xed.


FOLDING DOWN THE REAR BACKREST


RETURNING THE REAR BACKREST TO THE UPRIGHT POSITION

When returning the backrest to the upright position, ensure that it is
locked securely to assure your safety.
)
Open the boot.

)
Pull the backrest release handle, located under the shelf.
When transporting long objects, do not place a load of more
than 30 kg on the rear of the backrest.
Do not place rough objects on the rear of the backrest which
could damage it.

)
Check that the front seat has been moved forward suffi ciently.

)
Pull the control upwards to tilt the backrest.
When the seat is put back in place, the backrest returns to its initial position.
The backrest can be folded down to increase the boot storage space.
The backrest release control is located in the boot.


)
Check that the front seats have been moved forward suffi ciently.

)
Check that nothing has been left on the rear seats.

)
Store the seat belt buckles on their respective securing points
located between the headrests.
)
Fold the backrest down onto the seat cushion.

4/
VISIBILITY






MANUAL ADJUSTMENT OF
HALOGEN HEADLAMPS







AUTOMATIC ADJUSTMENT OF
XENON HEADLAMPS
To avoid dazzling other road users, the height of the halogen bulb
headlamps must be adjusted according to the load in the vehicle.

0.
1 or 2 people in the front seats.

-.
3 people.

1.
4 people.

-.
Intermediate setting.

2.
4 people + maximum authorised loads.

-.
Intermediate setting.

3.
Driver + maximum authorised loads. In order to avoid causing a nuisance to other road users, this system
corrects the height of the xenon headlamp beams automatically and
when stationary, in relation to the load in the vehicle.
If a malfunction occurs, this warning lamp is displayed on the
instrument panel, accompanied by an audible signal and a
message in the screen.
The system then places your headlamps in the lowest position.
Initial setting is position "0". Do not touch the xenon headlamp bulbs.
Contact a PEUGEOT dealer or a qualifi ed workshop.