buttons Peugeot RCZ 2015 User Guide

134
RCZ_en_Chap06_conduite_ed01-2015
EXCEEdING THE PROGRAMMEd SPEEd
Intentional or unintentional exceeding of the
programmed speed results in flashing of this speed in
the screen.
Return to the programmed speed, by means of
intentional or unintentional deceleration of the vehicle, automatically \
cancels

the flashing of the speed.
EXITING CRUISE CONTROL MO d E
F Turn dial 1 to the "0" position: the cruise control mode is
deselected. It disappears from the display.
OPERATING F AULT
In the event of a cruise control malfunction, the speed is cleared
resulting
in flashing of the dashes.
Have
it checked by a PEUGEOT

dealer or a qualified workshop.
When the cruise control is switched on, be careful if you maintain
the pressure on one of the programmed speed changing buttons:
this may result in a very rapid change in the speed of your vehicle.
Do
not use the cruise control on slippery roads or in heavy traffic.
On a steep descent, the cruise control will not be able to prevent
the vehicle from exceeding the programmed speed.
To avoid any risk of jamming of the pedals:
-

ensure that the mat is positioned correctly
,
- never
fit one mat on top of another.

02
206
RCZ_en_Chap10b_RT6-2-8_ed01-2015
RADIO: select the previous/next preset
station.
Select the next entry in the address book.SRC/TEL button:
change the audio source,
start a call from the address book,
call/end call on the telephone,
press for more than 2 seconds: access
to the address book.
RADIO: change to the previous radio
station in the list.
Long press: automatic search for a
lower frequency.
CD: select the previous track.
CD: continuous press: fast reverse.
RADIO: change to the next radio station in the list.
Long
press: automatic search for a higher frequency.
CD: select the next track.
CD: continuous press: fast forward play.
Volume increase.
Volume decrease.Mute: press the volume
increase and decrease
buttons simultaneously.
Restore the sound by
pressing one of the
two volume buttons.
STEERING MOUNTEd CONTROLS

07
237
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Press the button on the numerical keypad to recall a
preset station.
Or press then turn the thumb wheel at the steering
mounted controls.
Presetting a station
After selecting a station, press one of the buttons on the
numerical keypad for 2 seconds to preset the current
station.
An audible signal confirms that the station has been preset.
Press RAdIO.
Activate / deactivate R d S
RDS, if activated, allows you to continue listening to the same
station
by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the entire country as radio stations do not
cover 100 % of the territory

. This explains the loss of reception of
the station during a journey.
Select "Guidance options " then
confirm.
Activate or deactivate "R
d S" then
confirm.
RAdIO

07
238
RCZ_en_Chap10b_RT6-2-8_ed01-2015
RAdIO
Display of options:
if active but not available, the display
will be greyed out,
if active and available, the display will
be empty.Display the name and number of
the multiplex service being used. Preset stations, buttons 1 to 6.
Short press: select the preset radio
station.
Long press: preset a radio station.
Display of "Radiotext" for the
current station.
Display of the "DAB" or "DAB
(FM)" band.
Display of the name of
the current station.
Represents the signal strength
for the band being listened to.
If the "DAB" radio station being
listened to is not available on
"FM", the "DAB FM" option is
greyed out. Any thumbnail broadcast by the
station.
The "Video mode" allows the
display to be enlarged.

08
244
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Audio streaming
Streaming allows audio files on your telephone to be played via the vehicle's speakers.
Connect the telephone: refer to the "USING THE TELEPHONE"
section.
Select "
Audio" or "All" profile.
If play does not start automatically, it may be necessary to start the
audio playback from the telephone.
Control is from the peripheral device or by using the audio system
buttons.
Once connected in streaming mode, the telephone is considered to be
a media source.
It is recommended that you activate "Repeat" on the Bluetooth
peripheral.
MUSIC MEdIA PLAYERS
Connecting APPLE® players
Connect the Apple® player to the USB port using a suitable cable
(not

supplied).
Play starts automatically.
Control is via the audio system.
The

classifications

available are those of the portable device
connected (artists / albums / genres / playlists / audiobooks /
podcasts).
The


default

classification used is by artist.
T
o modify the classification
used,


return

to

the

first level of the menu then select the desired
classification


(playlists for example) and confirm to go down through
the menu to the desired track.
The


"Shuffle

tracks" mode on an iPod
® corresponds to the "Random"
mode on the audio system.
The

"Shuffle

albums"

mode

on

an

iPod
® corresponds to the "Random
all" on the audio system.
"Shuffle

tracks"

is

restored

by

default

on each connection.
The version of software in the audio system may not be compatible
with the generation of your Apple
® player.

01
260
RCZ_en_Chap10c_RD45_ed01_2015
FIRST STEPS
Eject CD.Select source:
radio, audio CD / MP3 CD, USB,
j

ack connection, Streaming,
AU x .
Select the screen display
mode:
Date, audio functions, trip
computer, telephone. Automatic
frequency search
down/up.
Select previous/next CD, MP3
or USB track.
Audio settings: front/
rear fader

, left/right
balance, bass/treble,
loudness, audio
ambiences. Display the list of
local stations.
Long press: CD
tracks or MP3
folders (CD / USB).
TA

(Traffic
Announcements)

on/of

f.
Long press: PTY* (radio
Programme TYpe) mode.
Display main menu.
The DARK button changes the screen display
for improved driving comfort at night.
1
st press: upper bar only illuminated.
2nd press: black screen.
3rd press: return to standard display.
On/off, volume setting.
Buttons 1 to 6:
Select a pre-set radio station.
Long press: pre-set a station. Select next frequency down/up.
Select previous/next MP3 folder.
Select previous/next folder / genre /
artist / playlist (USB). Confirm.
Selection of FM / DAB /
AM* wavebands.
* Depending on model.
Abandon the current
operation.
*
Available according to version.

02
261
RCZ_en_Chap10c_RD45_ed01_2015
STEERING MOUNTEd CONTROLS
Radio: automatic search for a higher frequency.
CD / MP3 / USB: selection of the next track.
CD / USB: continuous press: fast forwards play
.
Move in the list. Change audio source.
Confirm
a selection.
Call/end call on the telephone.
Press for more than 2 seconds:
telephone main menu.
Radio: automatic search for a lower
frequency.
CD / MP3 / USB: selection of the
previous track.
CD / USB: continuous press: fast
reverse.
Move in the list.
Radio: select the previous/next pre-set
station.
USB: select genre / artist / folder from the
classification

list.
Select the previous/next item in a menu. Volume increase.
Volume decrease.Mute: press the volume
increase and decrease
buttons simultaneously.
The sound is restored
by pressing one of the
two
volume buttons.

04
263
RCZ_en_Chap10c_RD45_ed01_2015
AUdIO
Press the SOURCE button several
times in succession and select the
radio.
Press the BAND AST button to select
a waveband: FM1, FM2, FMast, AM.
Briefly press one of the buttons to
carry out an automatic search of the
radio stations.
Press one of the buttons to carry out
a manual search up / down for radio
frequencies.
Press the LIST

REFRESH button to
display the list of stations received
locally (30 stations maximum).
To update this list, press for more
than two seconds.
The external environment (hills, buildings, tunnels, basement car parks\
, ...) may
block reception, including in RDS mode. This is a normal effect of the way in which
radio waves are transmitted and does not indicate any failure of the aud\
io system.
RdS
RadioSelecting a station
Press the MENU button.
Select AUDIO FUNCTIONS then
press OK.
Select the FM WAVEBAND
PREFERENCES function then
press
OK.
Select ACTIVATE RDS then
press
OK. RDS appears on the
screen.
In radio mode, press OK directly to activate / deactivate RDS
mode.
The RDS, if displayed, enables you to continue listening to the same
station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the\


country as radio stations do not cover 100 % of the territory. Under conditions
of very weak reception, the system may change to a regional station.

04
265
RCZ_en_Chap10c_RD45_ed01_2015
Insert circular compact discs only.
Some anti-pirating systems, on original discs or CDs copied using a
personal recorder, may cause faults which are no reflection on the
quality

of the vehicle's player.
Without pressing the E
j ECT button, insert a CD in the player, play
begins automatically.
Cd
Playing

a C d
To play a disc which has already been
inserted, press the SOURCE button
several times in succession and
select CD.
Press one of the buttons to select a
track on the CD.
Press the LIST REFRESH button to display the list of tracks
on the CD. Press and hold one of the buttons for
fast forwards or fast backwards.
AUdIO
digital radio - dAB / FM tracking
"DAB" does not have 100% coverage of the country.
When the digital signal is weak, "DAB / FM auto tracking" allows you
to continue listening to the same station, by automatically switching
to the corresponding analogue "FM" station (if it exists).Press the "Menu" button.
Select "Multimedia"
and confirm.
Select "
d AB / FM auto tracking" and confirm
If "DAB / FM auto tracking" is on, there will be a difference of a few
seconds in the programme when the system changes to analogue
"FM" radio, with sometimes a variation in volume.
When the strength of the digital signal is good again, the system
automatically switches back to "DAB"
If the "DAB" station you are listening to is not available on "FM"
("
d AB/FM" option barred), or if "DAB / FM auto tracking" is not on,
the sound will be cut when the digital signal is too weak.

04
266
RCZ_en_Chap10c_RD45_ed01_2015
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,
is an audio compression standard which permits the recording of
several
tens of music files on a single disc.
In order to be able to play a recorded CDR or CDRW, when
recording,
the ISO 9660 level 1.2 or Joliet file format is
recommended.
If the disc is recorded in another format, it may not be played
correctly

.
It is recommended that the same recording format is always used
for an individual disc, with as low a speed as possible
(4x
maximum) for optimum sound quality.
In the particular case of a multi-session CD, the
j oliet format is
recommended.
The
audio system will only play files with the extension ".mp3" with
a

sampling rate of 22.05 KHz or 44.1 KHz. No other type of file
(.wma, .mp4, .m3u...) can be played.
It

is advisable to restrict file names to 20 characters without using
special characters (e.g. " ?

; ù) to avoid any playing or displaying
problems.
MP3 Cd
Information
and advice
AUdIO
Empty CDs are not recognised and may damage the system.
Insert an MP3 compilation in the player.
The

audio

equipment

searches

for

all

of

the

music

tracks,

which

may take anything between a few seconds and several tens of
seconds, before play begins.
MP3 Cd
Playing

an MP3 compilation
On a single disc, the CD player can read up to 255 MP3 files spread over 8 folder levels. However , it is advisable to keep to
a limit of two levels to reduce the access time before the CD is
played.
While the CD is being played, the folder structure is not followed.
All
of the files are displayed on a single level.
To play a disc which has already
been inserted, press the SOURCE
button several times in succession
and select CD.
Press one of the buttons to select a
folder on the CD.
Press the LIST REFRESH button to display the list of directories of
the MP3 compilation. Press and hold one of the buttons for
fast forward or backward play. Press one of the buttons to select a
track on the CD.