park assist Peugeot RCZ 2015 Owner's Manual

3
RCZ_en_Chap00a_sommaire_ed01-2015
Driving recommendations 115
Starting-switching off the engine 1 16
Parking brake

1
19
Hill start assist

120Manual gearbox

121
Automatic gearbox 122
Gear shift indicator

126
T

yre under-inflation detection
127Speed limiter

129
Cruise control 132
Parking sensors

135
Fuel tank


139
Bonnet


141
Petrol engines


142Diesel engine


143
Running out of fuel (Diesel)


144
Checking levels


145Checks


148
T

emporary puncture repair kit
150
Changing a wheel


157
Snow chains


162
Changing a wiper blade


163Energy economy mode


164
12 V battery


165
Changing a bulb


169
Changing a fuse


177
T

owing a vehicle
184T

owing a trailer
186
Cleaning and maintenance


188
Accessories

190
6/ 115-137dRIVING
7/ 138-149CHECKS
8/ 150-191PRACTICAL INFORMATION
279-283
ALPHABETICAL INdEX
Petrol engines 192
W eights (petrol) 193Diesel engine
195
W eights (Diesel) 196Dimensions
197
Identification markings 199
9/ 192-200TECHNICAL dATA
Emergency or assistance 201P EUGEOT Connect Navigation (R T6) 203P EUGEOT Connect Sound (RD5) 259
10/ 201-278AUdIO EQUIPMENT ANd TELEMATICS
CONTENTS

4
RCZ_en_Chap00b_vue-ensemble_ed01-2015
ExTERIOR
Remote control key 37-40
- opening / closing
-

unlocking / partial opening of the boot
-


anti-theft protection
-

battery
Alarm
41-43
Boot
49
Temporary puncture repair kit

150-156
Changing a wheel


157-161
Active,

fixed spoiler 93-94,
95
Parking sensors

135-137
T

owbar 186-187
Towing

184-185
Changing bulbs


172-176
-


rear lamps
-


3rd stop lamp
-


number plate lamps Accessories

190-191
Cleaning, maintenance

188-189
Fuel tank


139-140Wipers

83-86
Changing a wiper blade

163
Door mirrors


55-56
Active bonnet


92
Lighting controls


75-80
Directional lighting


82
Headlamp height adjustment


81
Changing bulbs


169-172
-


front lamps
-


direction indicator repeaters
Doors

46-48
-

opening / closing
-


central locking
-


anti-intrusion security
-


emergency locking
Electric windows


44-45
Braking assistance


89
T

rajectory control
90-91
T

yre under-inflation detection 127-128
Tyre pressures

156, 198
Snow chains


162

6
RCZ_en_Chap00b_vue-ensemble_ed01-2015
Instrument panels 12-13
W arning lamps 14-20
Indicators
21-24
Buttons
25-26
-

Check / service indicator / trip distance
recorder
-


lighting dimmer
Headlamp height adjustment


81
Door mirrors


55-56
Electric windows


44-45
Dashboard fuses


177-180
Opening the bonnet


141Courtesy lamps

64
Seat belt / passenger's front airbag warning lamps display
96-97
Rear view mirror

57
Sun visor


68
Parking brake


1
19
Active spoiler control

93-94Ignition switch / Steering lock / Starting


1
16-118
Multifunction screens

30-36
Clock


26
P

EUGEOT
Connect Navigation (R
T6)
2
03-258
P
EUGEOT
Connect Sound (RD5)

259-278
V

entilation 59-60
Dual zone digital air conditioning

61-63
Automatic gearbox


122-125
Manual gearbox


121
Gear shift indicator


126
Hill start assist


120
INSTRUMENTS AND CONTROLS

8
RCZ_en_Chap00b_vue-ensemble_ed01-2015
DSC/ASR system 90-91
Parking sensors 135-137
Assistance call

88, 201-202
Hazard warning lamps


87
Emergency call


88, 201-202
V

olumetric alarm monitoring

41-43
Central locking /

Anti-intrusion
security

47-48
INSTRUMENTS AND CONTROLS
CENTRAL
SWITCH P ANEL

30
RCZ_en_Chap01_controle-de-marche_ed01-2015
MONOCHROME SCREEN C (WITH
P EUGEOT
C
ONNECT
S
OUND (RD5))
dISPLAYS IN THE SCREEN
Displays according to context:
-
time,
-
date,
- ambient
temperature (the value displayed flashes if there is a risk of
ice),
-


visual parking assistance,
-


audio functions,
-


alert messages,
-

the display and vehicle equipment settings menus.
CONTROLS
From the control panel of your PEUGEOT Connect Sound (RD5), you
can:
F

press the
"MENU" button for access to the main menu,
F

press the "
5" or "6" buttons to scroll through the items on the
screen,
F

press the
"MO d E" button to change the permanent application
(audio source, telephone...),
F

press the "
7" or "8" buttons to change a setting value,
F

press the
"OK" button to confirm,
or
F

press the
"Back" button to abandon the operation in progress.

11 6
RCZ_en_Chap06_conduite_ed01-2015
IGNITION SWITCH
Ignition on position
It allows the use of the vehicle's electric equipment or portable devices to be charged.
Once the state of charge of the battery drops to the reserve level, the \
system switches to energy economy mode: the power supply is cut off
automatically to preserve the remaining battery charge.
In wintry conditions, the warning lamp can stay on for a longer
period. When the engine is hot, the warning lamp does not
come
on.
STARTING-SWITCHING OFF THE ENGINE
It has 3 positions:
-
position 1 (Stop): insert and removing the key,
-
position 2 (Ignition on) : steering column unlocked, ignition on,
Diesel preheating, engine running,
-
position 3 (Starting).
STARTING THE ENGINE
With the parking brake applied and the gearbox in neutral or
position
N or P:
F

depress the clutch pedal fully (manual gearbox),


or
F press
the brake pedal firmly (automatic gearbox),
F

insert the key into the ignition switch; the system recognises
the

code,
F

unlock the steering column by simultaneously turning the steering
and the key

.
F

With a petrol engine, operate the starter motor by turning the key to
position 3

without pressing the accelerator pedal, until the engine
starts. Once the engine is running, release the key.
F

With a Diesel engine, turn the key to position 2

, ignition on, to
operate the engine pre-heating system.
In certain cases, you may have to apply more force to the steering
(wheels on full lock, for example).
Avoid attaching heavy objects to the key, which would weigh down
on its blade in the ignition switch and could cause a malfunction. Switching off the engine leads to a loss of braking assistance. Wait until this warning lamp goes off in the instrument panel
then operate the starter motor by turning the key to position
3
without pressing the accelerator pedal, until the engine starts.
Once the engine is running, release the key.

11 7
RCZ_en_Chap06_conduite_ed01-2015
In temperate conditions, do not leave the engine at idle to warm
up but move off straight away and drive at moderate speed.To facilitate unlocking of the steering column, it is recommended
that the wheels be returned to the straight ahead position before
switching off the engine.
For more information, refer to the "Practical information" section,
under "Energy economy mode". When you leave the vehicle, keep the key with you and lock
the
vehicle.
If the engine does not start straight away, switch off the ignition.
Wait a few moments before operating the starter motor again.
If the engine does not start after several attempts, do not keep
trying: you risk damaging the starter motor or the engine. Contact
a
PEUGEOT

dealer or a qualified workshop.
Never switch off the ignition before the vehicle is at a complete
stop. With the engine off, the braking and steering assistance
systems are also cut off: risk of loss of control of the vehicle.
Never leave the engine running in an enclosed area without
adequate
ventilation: internal combustion engines emit toxic
exhaust gases, such as carbon monoxide. Danger of intoxication
and death!
In very severe wintry conditions (temperatures below -23°C), to
ensure the correct operation and durability of the mechanical
components of your vehicle, engine and gearbox, it is necessary
to leave the engine running for 4 minutes before moving of

f.
SWITCHING OFF THE ENGINE
F Stop the vehicle.
F
With the engine running at idle, turn the key to position 1

.
F

Remove the key from the ignition switch.
F


T
o lock the steering column, turn the steering until it locks.
F

Check that the parking brake is correctly applied, particularly on
sloping ground.
Energy economy mode
After switching off the engine (position 1-Stop), for a maximum of
30 minutes you can still use functions such as the audio and telematic
system, the wipers, dipped beam headlamps, courtesy lamps,
...
6/
DRIVING

120
RCZ_en_Chap06_conduite_ed01-2015
HILL START ASSIST
System which keeps your vehicle immobilised temporarily
(approximately 2 seconds) when starting on a gradient, the time it tak\
es
to move your foot from the brake pedal to the accelerator pedal.
OPERATION
This function is only active when:
-

the vehicle is completely stationary
, with your foot on the brake
pedal,
-

certain conditions of slope are met,
-


with the driver
’s door closed.
The hill start assist system cannot be deactivated.
Do not exit the vehicle while it is being held in the hill start assist \
phase.
OPERATING FAULT
On an ascending slope, with the vehicle stationary, the vehicle is
held for a brief moment when you release the brake pedal:
- provided
you are in first gear or neutral on a manual gearbox,
-

provided you are in position d
or M on an automatic gearbox. On a descending slope, with the vehicle stationary and reverse
gear engaged, the vehicle is held for a brief moment when you
release the brake pedal.
If you need to exit the vehicle with the engine running,
apply the parking brake and then check that the
corresponding warning lamp in the instrument panel is on.
If a malfunction of the system occurs, these warning lamps come on.
Have it checked by a PEUGEOT

dealer or a qualified workshop.

135
RCZ_en_Chap06_conduite_ed01-2015
This function cannot, in any circumstances, take the place of the
vigilance of the driver.Certain types of obstacle (stake, roadworks cone, etc.) detected
initially will no longer be detected at the end of the manoeuvre, if
they
are located in blind spots in the sensors' field of detection.
PARKING SENSORSREAR PARKING SENSORS
Audible assistance
The proximity information is given by an intermittent audible signal, th\
e
frequency
of which increases as the vehicle approaches the obstacle.
The sound emitted by the speaker (right or left) indicates the side on\

which the obstacle is located.
When the distance between the vehicle and the obstacle becomes
less than approximately thirty centimetres, the audible signal becomes
continuous.
This system indicates the proximity of an obstacle (person, vehicle, tree,
gate,

etc.)

which

comes

within

the

field

of

detection

of

sensors

located

in the bumper

.
The system is switched on by engaging reverse gear. This is
accompanied by an audible signal.
The system is switched off when you come out of reverse gear.
6/
DRIVING

136
RCZ_en_Chap06_conduite_ed01-2015
deactivation / Activation of the front and rear parking sensors
V
isual assistance
FRONT PARKING
SENSORS
In addition to the rear parking sensors, the front parking sensors are
triggered when an obstacle is detected in front and the speed of the
vehicle is still below 6 mph (10 km/h).
The front parking sensors are interrupted if the vehicle stops for more \
than three seconds in forward gear, if no further obstacles are detected
or when the speed of the vehicle exceeds 6 mph (10 km/h).
This supplements the audible signal by displaying bars in the
multifunction screen which move progressively nearer to the vehicle.
When the obstacle is near, the "Danger" symbol is displayed in
the

screen. The function is deactivated by pressing this button. The indicator lamp
in the button comes on.
Pressing this button again reactivates the function. The indicator lamp in
the button goes off. The sound emitted by the speaker (front or rear) indicates whether the\

obstacle is in front or behind.