lock PONTIAC PONTIAC 1996 Owner's Guide

Console Shift
1. Hold the brake pedal down with your right foot and
2. Move the shift lever into the PARK (P) position
set the parking brake.
like
this:
I Hold in the button on the
lever,, and push ‘the lever
all
the way toward the front of
3. Move the ignition key to the ‘LOCK position.
4. Remove the key and take it with you. If you can
leave your vehicle with the ignition
key in your
hand, your vehicle is in PARK (P).
. /. 1 ,‘r ,*
Leaving Your Vehicle With the
Engine Running
A CAUTION:
It can be dangerous to leave your vehicle with the
engine running. Your vehicle could move
suddenly
if the shift lever is not fully in PARK (P)
with the parking brake firmly set. And, if you I
leave the vehicle with the engine running, it could
overheat and even catch fire. You or others could
be injured. Don’t leave your vehicle with the
engine running unless you have to.
If you have to leave your vehicle with the engine
running, be sure your vehicle is in PARK (P) and your
parking brake
is firmly set before you leave it. After
you’ve moved the shift lever into the PARK
(P)
position, hold the regular brake pedal down. Then, see
if you can move the shift lever away from PARK (P)
without
first pulling it toward you (or, if you have a
console shift lever, without first pushing the button). If
you can, it means that the shift lever wasn’t fully locked
into PARK (P) .
2-21
ProCarManuals.com

Torque Lock Shifting Out of PARK (P)
If you are parking on a hill and you don’t shift your
transaxle into PARK (P) properly, the weight of the
vehicle may put too much force on the parking pawl in
the transaxle. You may find it difficult to pull the shift
lever out
of PARK (P). This is called “torque lock.” To
prevent torque lock, set the parking brake and then shift
into PARK (P) properly before you leave the driver’s
seat.
To find out how, see “Shifting Into PARK (P)” in :.
the Index. I
When you are ready to drive, move the shift lever out of
PARK (P) before you release the parking brake.
If torque lock does occur, you may need to have another
vehicle push yours a little uphill
to take some of the
pressure
from the transaxle. so vou can pull the shift
lever out
of PARK (P).
1 .:
Your Pontiac has .a brake-transaxle shift interlock.
You must fully apply your regular brakes before you
can shift from PARK (P) when the ignition is in the
I RUN position. See “Automatic Transaxle Operation”
in the Index.
If you cannot shift out
of PARK (P), ease pressure on
, the shift lever by pushing it all the way into PARK (P),
. while keeping the brake pedal pushed down. Release the
.. . shift lever button if you have a console shift. Then move
the
shift lever out of PARK (P), being sure to press the
shift lever button
if you have a console shift. .
If y’ou ever hold the brake pedal down but still can’t
shift out of
PARK (PI; try this:
1. Turn the key to the OFF position.
2. Apply and hold the brake until the end of Step 4.
3. Shift to NEUTRAL (N).
4. Start the engine and shift to the drive gear you want.
5. Have the vehicle’ fixed as soon as you can.
ProCarManuals.com

Power Windows The driver's window switch has an auto-down feature.
This switch is labeled AUTO. Tap the rear of the switch,
and the driver's window will open
a small amount. If the
rear of the switch is pressed all the way down and
released, the window will
go all the way down.
To stop the window while it is lowering,
press the front
of the switch.
To raise the window, press and hold the
front
of the switch.
.. . ._ 1 , ..1; 'T On four-door models, the driver's window controls also
7; include a lock-out switch. Press LOCK OUT to stop
. >. -. c with the lock on. Push LOCK OUT again for normal
. ., .I -. .. front and rear passengers from using their window . switches. The drivercan still control all the windows .- ..
. 5' .. .. window operation. When the orange band on the switch
is showing, the passengers can operate their windows.
Switches on
the driver's door armrest control each of the . Horn
windows when the ignition is on. In addition, each
Press either horn symbol on your steering wheel to
passenger's door has a switch for its own window.
sound the horn.
2-25
ProCarManuals.com

Tilt Steer!-g Wheel
A tilt steering wheel allows
you to adjust the steering
wheel before
you drive.
You can also raise it to the
highest level to give
your
legs more room when you
exit and enter the vehicle.
To tilt the wheel, hold the steering wheel and pull the
lever. Move the steering wheel
to a comfortable level,
then release the lever to lock the wheel
in place.
Thrn SignaVMultifunction Lever
The lever an the left side of the steering column
includes
yoar:
m
a
0
2-26
ProCarManuals.com

Windshield Wipers
You. control the windshield
wipers
by tuning the band
marked WIPER. Fora
single wiping cycle,
turn the
band to
MIST. Hold it there
until
the wipers start; then
let
go. The wipers will stop
dter-one cycle.
If you want.
more. cycles, hold the band
on
MIST longer.
For steady wiping at low speed, turn the band to LO. For
high-speed wiping, turn
the band’ further, to HI. To stop
You can set the wiper speed for a long or short delay
between wipes.
This can be very useful in light rain or
snow. Turn the band to choose the delay time. The
closer
to LO, the shorter the delay.
Be sure to clear ice and snow
from the wiper blades
before using th&n. If they’re Frozen,to the windshield,
carefully loosen or thaw them. If your blades do become
damaged, get new blades or blade inserts.
the wipers, turn the band to OW.

Heavy snow or ice can overload your wipers. A circuit
breaker will stop them until the motor cools. Clear away
snow
or ice to prevent an overload.
Windshield Washer
At he top of the multifunction lever, there’s a paddle
with the word
PUSH on it. To spray washer fluid on the
windshield,
push the paddle. The wipers will run far
several sweeps and then either stop
or return to your
preset speed.
,
I
In freezing weatll=r, don’t use your washer until
the
windshield is warmed. Otherwise the washer
fluid can form ice on the windshield, blocking
your
vision.
ProCarManuals.com

Lamps
The lamp controls are on the instrument panel.Vhey
control these systems:
Headlamps
Taillamps
Parking Lamps
0 License Lamps
Sidemarker Lamps
0 Instrument Panel Lights
0 Courtesy Lamps
0 Fog Lamps
-:q- Turn the knob to this symbol (B) to turn on the
headlamps and other operating lamps.
pf Turn the knob to this symbol (A) to turn on the
parking
and other operating lamps without the
headlamps.
Turn the knob to OFF to turn off the lamps.
A warning chime will sound when you turn the ignition
switch to the
OFF, LOCK or ACC position with the
lamps on.
2-32 --
ProCarManuals.com

Daytime Running Lamps (Option)
Daytime Running Lamps (DRL) can make it easier for
others to see the front
of your vehicle during the day.
DRL can be helpful in many different driving
conditions, but they can be especially helpful in the
short periods after dawn and before sunset.
A light sensor on top of the instrument panel makes the
DRL work, so be sure it isn’t covered.
The DRL system will make your low-beam headlamps
come on at a reduced brightness when:
0 The ignition is on,
0 The headlamp switch is off, and
0 The parking brake is released.
When
the DRL aye on, only your low-beam headlamps
will be on. The taillamps, sidemarker and other lamps
won’t be on.
Your instrument panel won’t be lit up either.
When it’s dark enough outside, your low-beam headlamps
will change to
full brightness. The other lamps that come
on with your headlamps will also
come on. When
it’s bright enough outside, the regular lamps will
go out, and your low-beam headlamps will change to
the reduced brightness of DRL.
To idle your vehicle with the DIU off, set the parking
brake while the ignition is in the
OFF or LOCK
position. Then start your vehicle. The DRL will stay
off until you release the parking brake.
As with any vehicle, you should turn on the regular
headlamp system when you need it.
Fog Lamps
To turn the fog lamps on, press the top of the fog lamp
switch
(C). Press the bottom of the switch to turn the fog
lamps
off. Your parking lamps must be on, or your fog
lamps won’t come on.
The fog lamps will
go off whenever you change to
high-beam headlamps. When you return to low beams,
the fog lamps will come on again.
. 2-33
ProCarManuals.com

Interior Lamps
Instrument Panel Brightness Control
You cm brighten or dim the instrument panel lights by
moving the
PANEL dial. If you turn the dial all the way
up, your courtesy or interior lamps will come on.
Courtesy Lamps
When any door is opened, several lamps come on. lltllese
lamps are courtesy lamps. They make it easy for you
to
enter and leave your vehicle. You can also tun these
lamps on by moving the
PANEL dial all the way up.
Some of the lamps have switches
so you can turn them
on, even when the doors are closed. These lamps are
reading lamps. To avoid dtaining your battery, be sure to
turn
off all reading lamps when leaving your vehicle.
Sustained Interior Illumination
Your courtesy lamps will come on and stay on for a set
time whenever
you:
Open a door.
Press UNLOCK on the Remote Lock Control
transmitter (if equipped).
transmitter (if equipped).
Press DOOR on the Remote Lock, Control
If you open a door, the lamps will stay on while it’s open
and then turn off automatically about 18 seconds after
you close
it. If you don”t open a door, the lamps will
turn
off after about 18 seconds, unless you pressed
UNLOCK on the Remote Lock Control transmitter.
If
you pressed UNLOCK and don’t open a door, the lamps
will turn
off after about 55 seconds.
Sustained interior illumination includes a feature called
theater
dimming. With theater dimming, the lamps
don’t just
turn off at the end of the delay time. Instead,
they slowly
dim during the delay time until they go out.
The delay tirne is cancelled if you turn the ignition key to
the
RUN or START position, so the lamps will go out
right away.
When the ignition is
on, sustained interior illumination is
inactive, which means the courtesy lamps won’t come on.
2-34
ProCarManuals.com

Convex Outside Mirror
Your passenger’s side mirror is convex. A convex
mirror’s surface
is curved so you can see more from the
driver’s seat.
A CAUi ION:
A convex mirror can make things (like other
vehicles)
look farther away than they really are.
If you cut too sharply into the right lane, you
codd hit a vehicle on your right. Check your
inside mirror or glance over your shoulder before
changing lanes.
Storage and COrr7artments
Glove Box
Use the door key to lock and unlock the glove box. To
open it, lift the latch.
To use the storage area, fold down the armrest. Press
the latch on the front edge and pull up. To use the
cupholder,
flip it forward. ;.
You may also have an armrest in the rear. It has a
storage area for small items.
ProCarManuals.com

Convenience Net (Option)
Your vehicle may have a convenience net. You’ll see it
on
the back wall of the trunk.
Put small loads, like grocery bags, in the net. It can help
keep them from falling
over during sharp turns or quick
starts and
stops.
The net isn’t for larger, heavier loads. Store them in the
trunk as far forward as you can.
You can unhook the net so that it will lie flat when
you’re
not using it.
Ashtrays and Lighter
The center front ashtray may be on the instrument panel
or on the console. To remove the console ashtray, open
the lid and lift out the ashtray using the snuffer.
For the instrument panel ashtray, open it, push down on
the locking tab and pull out the ashtray.
To remove the rear console ashtray, open it, push down
on the snuffer and pull the ashtray out of the console. To
remove the rear door ashtray, open and pull up on the
ashtray
door.
NOTICE:
Don’t put papers and other things that burn into
your ashtrays.
If you do, cigarettes or other
smoking materials could set them
on fire,
causing damage,
ProCarManuals.com