key PORSCHE 911 TURBO 2014 6.G User Guide

Opening and Locking 23
In the multi-purpose display of the instrument panel, you have the option of selecting diverse variants of automatic door locking and automatic door unlocking.
For information on modifying the opening and locking settings:fPlease see the chapter “LOCKING SETTINGS” on page 122.
Opening and Locking from Inside
The factory settings of the vehicle are described in this section. In the multi-function display in the instrument panel, you can change the settings and store them on the respective key for vehicles with memory.
For information on modifying the opening and locking settings: fPlease see the chapter “LOCKING SETTINGS” on page 122.Central locking button
Locking doors
fPress the central locking button.When the ignition is switched on, the indicator light in the button lights up.Both vehicle doors will be locked (only if all doors are closed).The doors can be opened from inside by pulling on the door opener.
Automatic with Auto Lock
If this function is activated, the vehicle is locked automatically when a speed of approximately 2 mph (5 km/h) is exceeded.
For information on modifying the unlocking and locking settings: fPlease see the chapter “LOCKING SETTINGS” on page 122.
Unlocking doors
fPress the central locking button.The indicator light on the button goes out.Both vehicle doors will be unlocked.
Automatic with Auto Unlock
The vehicle is automatically unlocked when the ignition key is removed.
For more information on modifying the unlocking and locking settings: fPlease see the chapter “LOCKING SETTINGS” on page 122.
Information
If the vehicle was locked using the car key or the emergency key, it cannot be unlocked with the central locking button.
Information
In the event of an accident with airbag deployment, the doors are unlocked automatically to facilitate fast access for helpers. The emergency flasher is also activated automatically.
14_991_Turbo_21.book Seite 23 Mittwoch, 9. April 2014 2:19 14

Opening and Locking 25
3.Raise lid slightly and unlatch the safety catch with the red lever (arrow).4. Open the luggage compartment fully.
Opening luggage compartment lid with the key
Information
When the luggage compartment lid is unlocked, the vehicle doors are also unlocked.
Unlocking and opening luggage compartment lid with the key
1. Press button . 2. Raise lid slightly and unlatch the safety catch with the red lever.3. Open the lid.
Unlocking and opening luggage compartment lid with Porsche Entry & Drive (keyless)
The luggage compartment lid can be opened if you are in the front area of the vehicle with the key.fHold your hand between the Porsche Crest and the license plate ( illustration). – The lid is unlocked via a sensor and pops open.– The vehicle doors are also unlocked.fRaise lid slightly and unlatch the safety catch with the red lever.fOpen the lid
14_991_Turbo_21.book Seite 25 Mittwoch, 9. April 2014 2:19 14

26 Opening and Locking
Closing luggage compartment lid
1.Lower lid and let it fall into the lock. If necessary, push the lid closed with the palm of your hand in the area of the lock.2. Check that the lid has correctly engaged in the lock.
When the vehicle is in motion, a message will appear on the multi-function display in the instru-ment panel if the lid is not closed properly.
Opening engine compartment lid with the pull-button
Coupé only:
1. Open the driver’s door. 2. Operate pull-button B next to the driver’s seat. The lid is unlocked and can be raised.
Cabriolet only:
1. Open the driver’s door. 2. Operate pull-button B next to the driver’s seat. Engine compartment lid (convertible-top compartment lid) opens automatically to the service position.
Closing engine compartment lid
Coupé only:
1. Lower lid and let it fall into the lock. If necessary, push the lid closed with the palm of your hand in the area of the lock.2. Check that the lid has engaged correctly in the lock.
When the vehicle is in motion, a message will appear on the multi-function display in the instrument panel if the lid is not closed properly.
Cabriolet only:
fPress pull-button B. Engine compartment lid (convertible-top compartment lid) closes automatically.
Malfunctions when Opening and
Closing
Emergency operation of luggage compartment lid
If the vehicle battery is discharged, the luggage compartment lid can be opened only by connecting an external electrical power source.fPlease see the chapter “EMERGENCY UNLOCKING OF LUGGAGE COMPARTMENT LID” on page 270.
Only one door is unlocked
The setting for locking and unlocking the doors has been changed on the multi-function display in the instrument panel. fPlease see the chapter “SETTING DOOR UNLOCKING” on page 122.
You can open both doors irrespective of the selected setting.fPress button on the key twice within 5 seconds.
14_991_Turbo_21.book Seite 26 Mittwoch, 9. April 2014 2:19 14

Opening and Locking 27
The vehicle cannot be unlocked
Remote control of the car key may – fail due to a fault,– due to a flat key battery,– not function correctly due to radio waves (also radio contact between remote control and vehicle in the case of Porsche Entry & Drive).
If the vehicle cannot be opened, then: 1. Place the car key at the outside edge of the windshield on the passenger’s side and, at the same time, press button ( illustration).
If the vehicle still cannot be opened, then: 2. Remove the emergency key from the car key. Please see the chapter “EMERGENCY KEY” on page 17.
3. Unlock and open the driver’s door with the emergency key.For this purpose, lift and hold the door handle.Insert the emergency key in the door lock, turn 90° anti-clockwise and remove the emergency key again.4. Release the door handle and open the door by pulling the door handle again.5. Switch on the ignition within 15 seconds to prevent the alarm system from triggering.Further procedure for vehicles with Porsche Entry & Drive:If the ignition cannot be switched on or if the engine will not start, the message “ Key not found or key fault Change key position ” will appear on the multi-function display.6. Turn control unit back to ignition lock position 0. 7. Try to start the engine again. If the engine will not start, the message ““ Key not found or key fault Change key position ” will appear again. The message “ Operating device: turn left, pull off, insert key ” appears after approx. 1 second.8. Turn control unit back to ignition lock position 0 and remove it from the ignition lock. Switch on the ignition using the ignition key (not the emergency key).
Switching off operational readiness (for vehicles with Porsche Entry & Drive)
Operational readiness of Porsche Entry & Drive is switched off after 96 hours for the driver’s door and after 36 hours for the passenger's door, if the vehicle is not unlocked within this time.1. Pull the door handle once to activate the system again.2. Pull the door handle again to open the door.
14_991_Turbo_21.book Seite 27 Mittwoch, 9. April 2014 2:19 14

28 Opening and Locking
Emergency operation – unlocking the ignition key/control unit
If the vehicle battery is discharged, the ignition key can be removed only if the emergency operation is performed.
Emergency operation must also be performed in order to remove the control unit from the ignition lock on vehicles with Porsche Entry & Drive.1. Grasp the fuse box cover on the driver’s side at the finger hole and pull it off.2. Unclip metal hook A on the inside of the fuse box cover.
3. Use metal hook A to remove the plastic cover B from the ignition lock. Make sure not to lose the plastic cover B.
4. Turn control unit/ignition key to ignition lock position 0 (initial position). 5. Press metal hook A into opening C. You will hear an unlocking noise.6. Remove the control unit/ignition key in initial position 0. 7. Re-fit the plastic cover B.
14_991_Turbo_21.book Seite 28 Mittwoch, 9. April 2014 2:19 14

Opening and Locking 29
Door lock under door handle (driver‘s side)
The vehicle cannot be locked
This is recognizable by the fact that the emergency flasher does not flash and there is no locking noise.
The remote control of the key may – fail due to a fault,– due to a flat key battery,– not function correctly due to radio waves(e.g. mobile phone) in the vicinity of the vehicle (even radio contact between remote control and vehicle in the case of Porsche Entry & Drive).
Emergency locking if the central locking system has failed
If the vehicle cannot be locked, then: 1. Remove the emergency key from the car key. Please see the chapter “EMERGENCY KEY” on page 17.2. Open the driver’s door.
3. Lift the door handle on the driver’s door ( illustration). Insert the emergency key in the door lock, turn 90° clockwise and remove the emergency key again.Successful locking is indicated by the hazard warning lights flashing twice.4. Release the door handle and shut the door. The driver’s door is now locked.5. To use the emergency locking function on the passenger’s door , insert the emergency key into the door lock on the driver’s door again, turn 90° clockwise and remove the emergency key again.The passenger’s door is now locked.
Information
Emergency locking of the passenger’s door is not possible if the central locking system is defective.
Information
If the central locking system is defective, operating the lock cylinder in the driver’s door will lock all functioning locking elements of the central locking system.fHave faults in the central locking system repaired by an authorized Porsche dealer.
Emergency key
Removing emergency key
1. Push the release button to the side. 2. Pull out the key.
Insert emergency key
fPush in the key until the release button engages audibly.
Information
Different vehicle settings are stored on the respective key when the vehicle is locked, provided the vehicle is fitted with the relevant equipment.
14_991_Turbo_21.book Seite 29 Mittwoch, 9. April 2014 2:19 14

34 Seats, Mirrors and Steering Wheel
Seat backrest
Folding forward
fPull up lever in the side part of the backrest and fold the backrest forward.
Folding back
fTilt back and engage the backrest so that it cannot tip forward when you brake.
Storing seat settings
For information on storing and retrieving the seat settings: fPlease see the chapter “STORING PERSONAL SETTINGS” on page 143.
Comfort Entry Function
The Easy Entry function makes it easier for you to get in and out of the vehicle.
If persons or animals are within the range of movement of the seat, they could be trapped or crushed when the seat moves into or out of easy entry position.fSwitch off the Easy Entry function if a person is behind the driver’s seat.
Prerequisite
– The function must be activated on the multi- function display.
For information on switching the Easy Entry function on and off:fPlease see the chapter “SWITCHING COMFORT ENTRY ON AND OFF” on page 122.
Leaving the vehicle
The steering wheel moves upwards: – After the ignition key is removed or after the ignition is switched off and the driver’s door is opened on vehicles with Porsche Entry & Drive.
The driver’s seat moves to the rear: – After opening the driver's door and removing the car key or after opening the driver's door on vehicles with Porsche Entry & Drive.
Entering the vehicle
Driver’s seat and steering wheel are in their Comfort Entry positions.
Once the ignition key is inserted or once the ignition is switched on in the case of vehicles with Porsche Entry & Drive, the seat and steering wheel move to the stored position.
Information
When the key is changed, the seat may move to its new, key-specific entry position.
Information
Manual intervention in the seat setting interrupts the Easy Entry function.The driving position must then be set manually.
Easy Entry FunctionCAUTIONh
14_991_Turbo_21.book Seite 34 Mittwoch, 9. April 2014 2:19 14

36 Seats, Mirrors and Steering Wheel
Safety belts
Safety belts cannot protect the body if they are not fastened. Improperly worn safety belts increase the risk of injury in the event of an accident.Always make sure your and your passengers' safety belts are properly fastened when seated in the vehicle.fFor your and your passengers' protection, use safety belts at all times while the vehicle is in motion.fUse appropriate child restraint systems for all small children.fSafety belts must be positioned on the body as to restrain the upper body and lap from sliding forward. Improperly positioned safety belts can cause serious personal injury in case of an accident.
fThe shoulder belt should always rest on your upper body. The shoulder belt should never be worn behind your back or under your arm.fFor maximum effectiveness, the lap belt should be worn low across the hips.fPregnant women should position the belt as low as possible across the pelvis. Make sure it is not pressing against the abdomen.fBelts should not be worn twisted.fDo not wear belts over rigid or breakable objects in or on your clothing, such as eye glasses, pens, keys, etc. as these may cause injury.fSeveral layers of heavy clothing may interfere with proper positioning of belts.fBelts must not rub against sharp objects or damage may occur to the belt.fTwo occupants must never share the same belt at the same time.
Damaged, heavily stressed or worn safety belts cannot protect the body sufficiently in the event of an accident.fKeep belt buckles free of any obstruction that may prevent a secure locking.fBelts that have been subjected to excessive stretch forces in an accident must be inspected or replaced to ensure their continued effectiveness in restraining you.The same applies to belt tensioner systems which have been triggered. In addition, the anchor points of the belts should be checked.fIf safety belts do not work properly, see your authorized Porsche dealer immediately.fIf the belts show damage to webbing, bindings, buckles or retractors, they should be replaced to ensure safe operation.fDo not modify or disassemble the safety belts in your vehicle.fThe belts must be kept clean or the retractors may not work properly.Please see the chapter “CLEANING THE SAFETY BELTS” on page 237.fNever bleach or dye safety belts.fDo not allow safety belts to retract until they are completely dry after cleaning or this may cause damage to the belt.
Failure to Use Safety Belts
DANGERh
Using Damaged Safety Belts
DANGERh
14_991_Turbo_21.book Seite 36 Mittwoch, 9. April 2014 2:19 14

50 Seats, Mirrors and Steering Wheel
Folding exterior mirrors in and out electrically
fPress button D. Both exterior mirrors fold in and out automatically.
If the electrical adjustment facility fails
fFold mirror in or out manually.
Information
At speeds greater than approx. 30 mph (50 km/h), the exterior mirrors can no longer be folded in.
Folding exterior mirrors in and out automatically
The exterior mirrors are folded in automatically after the vehicle is locked.
Prerequisite: – The function is activated on the multi-function display.
Folding exterior mirrors out automatically
fSwitch on ignition. The exterior mirrors fold out.
Information
The exterior mirrors do not fold out automatically after the ignition is switched on if they were folded in manually using the button D.
If the electrical adjustment facility fails
fFold the mirror outwards by hand as far as it will go.
Storing exterior mirror settings
On vehicles with memory, individual exterior mirror settings can be stored on the person buttons on the driver’s side and on the car key.
For further information on retrieving and storing vehicle settings:fPLEASE SEE THE CHAPTER “COMFORT ENTRY FUNCTION” on page 34.
Exterior mirror heating
The exterior mirror heating is activated automatically when the heated rear window is switched on while the engine is running.
For information on switching on the heated rear window:fPlease see the chapter “HEATED REAR WINDOW/ EXTERIOR MIRROR HEATING” on page 60.
If the charging condition of the battery is critical, the exterior mirror heating function is restricted initially and then switched off.
Swivelling down mirror glass as parking aid
When reverse gear is engaged, the mirror on the passenger’s side swivels down slightly to show the curb area.fPlease see the chapter “SWIVELLING DOWN MIRROR GLASS AS PARKING AID” on page 210.
Automatic Anti-Dazzle Interior and
Exterior Mirrors
The interior mirror’s reflection is undistorted.
Sensors on the front and rear sides of the interior mirror measure the incident light. The mirror automatically changes to anti-dazzle position or reverts to its normal state, depending on the light intensity.
Information
The incident light within the detection area of light sensor C must not be restricted (e.g. by stickers on the rear window).
Switching off automatic anti-dazzle function
fPress button B. The indicator light A goes out.
14_991_Turbo_21.book Seite 50 Mittwoch, 9. April 2014 2:19 14

52 Seats, Mirrors and Steering Wheel
Adjusting steering wheel
fMove the control switch under the steering column in the relevant direction until the desired setting is reached.
The steering wheel setting is stored in the vehicle settings.
For further information on storing and retrieving the steering wheel setting:fPLEASE SEE THE CHAPTER “COMFORT ENTRY FUNCTION” on page 34.
Multi-function Steering Wheel
You may be distracted from paying attention to the road if you set or operate the multi-function display, radio, navigation system, telephone or other equipment when driving. You may lose control of the vehicle.fOperate the equipment when driving only if the traffic situation allows you to do so safely.fCarry out any complicated operating or setting procedures only when the vehicle is stationary.
Depending on the equipment in your vehicle, you can use the function keys of the multi-function steering wheel to operate the following Porsche communication systems:– Telephone– PCM– CDR-31– Multi-function display in the instrument panel
Readiness of the multi-functional steering wheel for operation
– With ignition switched on.fPlease observe the operating instructions supplied for the Porsche communication systems before operating the function buttons.
Information
The Porsche communication systems cannot be switched on and off using the multi-function steering wheel.
Setting and operating when drivingWARNINGh
14_991_Turbo_21.book Seite 52 Mittwoch, 9. April 2014 2:19 14