RENAULT CLIO 2009 X85 / 3.G Manual Online

Downloaded from www.Manualslib.com manuals search engine
lighting:exterior ............................................(up to the end of the DU)lights:side lights .........................................................(current page)signals and lights ..................................(up to the end of the DU)lighting:instrument panel ..............................................(current page)
1.75
ENG_UD10541_1Éclairages et signalisations extérieures (X85 - B85 - C85 - S85 -\
K85 - Renault)ENG_NU_853-3_BCSK85_Renault_1
Exterior lighting and signals
EXTERIOR LIGHTING AND SIGNALS (1/5)
uSide lights
Turn the end of stalk 1 until the
symbol is opposite mark 2.
An indicator light on the instrument panel will come on.
Adjusting the brightness of
the instrument panel lighting
Turn control 3 downwards to reduce the brightness and upwards to increase it.
1132
Before driving at night, check that the electrical equipment is operating cor- rectly and adjust the head- light beams (if your vehicle is not carrying its normal load). As a gen-
eral precaution, check that the lights are not obscured (by dirt, mud, snow or objects being transported).

Downloaded from www.Manualslib.com manuals search engine
lights:dipped beam headlights ...................................(current page)lighting:see-me-home ...................................................(current page)
1.76
ENG_UD10541_1Éclairages et signalisations extérieures (X85 - B85 - C85 - S85 -\
K85 - Renault)ENG_NU_853-3_BCSK85_Renault_1
JauneNoirNoir texte
EXTERIOR LIGHTING AND SIGNALS (2/5)
kDipped beam
headlights
Manual operation
Turn the end of stalk
1 until the symbol
is opposite mark 2.
An indicator light on the instrument panel will come on.
Automatic operation (depending on vehicle)
With the engine running, the dipped beam headlights are switched on or off automatically depending on the level of ambient light, without the need to oper-
ate stalk 1 (position 0).
This function can be deactivated or re- activated.
–
To activate it, with the ignition on,
press button 4 for at least four sec- onds. An instrument panel message confirms this action.
–
To deactivate it, with the ignition on and the vehicle stopped, press button 4 for at least four seconds. The ‘Auto lights OFF’ message is displayed on the instrument panel.
If stalk
1 is operated, it overrides and cancels the automatic function tempo- rarily.
See-me-home lighting
function
This function (useful, for example, for opening a gate, a garage, etc.) enables you to switch on dipped headlights mo- mentarily.
With the ignition off and the headlights
off, pull stalk 1 towards you: the dipped beam headlights come on for approxi- mately thirty seconds.
This action may be carried out no more than four times for a maximum lighting period of two minutes.
To switch off the lights before they go out automatically, turn the end of
stalk 1, then return it to position 0.
4
12

Downloaded from www.Manualslib.com manuals search engine
lights:main beam headlights ......................................(current page)lightsmobile directional .............................................(current page)
JauneNoirNoir texte
1.77
ENG_UD10541_1Éclairages et signalisations extérieures (X85 - B85 - C85 - S85 -\
K85 - Renault)ENG_NU_853-3_BCSK85_Renault_1
EXTERIOR LIGHTING AND SIGNALS (3/5)
Cornering lights
Depending on the vehicle, if the dipped beam headlights are on when corner- ing, and under certain driving condi- tions (speed, steering wheel angle, for- wards gear selected, etc.), additional lights are switched on to light the inside of the bend.
Note: under certain conditions of pro- longed use, this system will be switched off automatically as it is intended for use over limited periods.
áMain beam headlights
With the dipped beam head-
lights lit, pull stalk 1 towards you.
When the main beam headlights are lit up, an indicator light on the instrument panel comes on.
To return to the dipped headlight posi- tion, pull stalk 1 towards you again.
Automatic lighting with main
beam headlights
Depending on the vehicle, when you change to main beam headlights, the dipped beam headlight raise to improve lighting.
Note: in the event of an operating fault on this system, when returning from main beam to dipped beam headlights, the dipped beam headlight concerned goes out and the front fog lights come
on, accompanied by the g warning light and a fault message on the instru- ment panel
Warning: as this operating mode is not a normal driving condition, consult an approved Dealer as soon as possible.
1

Downloaded from www.Manualslib.com manuals search engine
lights-on warning buzzer........................................(current page)
1.78
ENG_UD10541_1Éclairages et signalisations extérieures (X85 - B85 - C85 - S85 -\
K85 - Renault)ENG_NU_853-3_BCSK85_Renault_1
JauneNoirNoir texte
EXTERIOR LIGHTING AND SIGNALS (4/5)
Switching off the lights
Manual operation
There are three options (depending on the vehicle):
– return stalk
1 to its initial position;
– the lights go out when the engine
is stopped, when the driver’s door is opened or when the vehicle is
locked. In this case, the next time the engine is started the lights will be switched back according to the posi- tion of the stalk 1.
– a timer will switch off the lights auto
- matically.
Automatic operation (depending on vehicle)
The lights go out when the engine is stopped, when the driver’s door is opened or when the vehicle is locked.
Lights-on reminder buzzer
If the lights are switched on after the engine is switched off, a warning beep sounds when the driver’s door is opened to warn you that the lights are still on.1

Downloaded from www.Manualslib.com manuals search engine
fog lights ................................................................(current page)lights:fog lights ..........................................................(current page)
JauneNoirNoir texte
1.79
ENG_UD10541_1Éclairages et signalisations extérieures (X85 - B85 - C85 - S85 -\
K85 - Renault)ENG_NU_853-3_BCSK85_Renault_1
EXTERIOR LIGHTING AND SIGNALS (5/5)
gFront fog lights
Turn centre ring 5 on stalk 1
until the symbol faces mark 6, then re- lease it.
Operation of the fog lights depends on the exterior lighting selected, and an in- dicator light will light up on the instru- ment panel.
Do not forget to switch off the fog lights when they are no longer needed, to avoid inconveniencing other road users.
fRear fog light
Turn centre ring 5 on stalk 1
until the symbol faces mark 6, then re- lease it.
The fog light can only be switched on if the dipped beam headlights or front fog lights are lit.
To avoid inconveniencing other road users, remember to switch off the rear fog light when it is no longer needed.
Note: the fog light is located on the driver’s side.
Erratic illumination of the dipped beam headlight and front fog light indicator lights coupled with a mes- sage on the instrument panel indi- cates an operating fault with the au- tomatic lighting of the main beam headlights.
R e f e r t o t h e i n f o r m a t i o n o n “Automatic lighting with main beam headlights” in Section 1.
Switching off the lights
Turn ring 5 again until mark 6 is oppo- site the symbol for the fog light you wish to switch off.
The front and rear fog lights switch off when the exterior lights are switched off.
15
6
When driving in fog or snow, or when transporting objects which are higher than the roof, the headlights do not come on automatically.
Switching on the fog lights remains the responsibility of the driver: the indicator lights on the instrument panel inform you whether the fog lights are lit (indicator light on) or not (indicator light not on).

Downloaded from www.Manualslib.com manuals search engine
lighting:exterior ............................................(up to the end of the DU)lights:adjusting .........................................(up to the end of the DU)lightsadjustment ......................................(up to the end of the DU)headlight beam adjustment ..................(up to the end of the DU)signals and lights ..................................(up to the end of the DU)
1.80
ENG_UD10542_1Réglage électrique de la hauteur des faisceaux (X85 - B85 - C85 -\
S85 - K85 - Renault)ENG_NU_853-3_BCSK85_Renault_1
Headlight beam adjustment
ELECTRIC BEAM HEIGHT ADJUSTMENT
On vehicles fitted with this function, control A allows you to adjust the height of the beams according to the load.
Turn control A downwards to lower the headlights and upwards to raise them.
Examples of positions for control A depending on the load
All versions except Utility and Estate vehicles
Commercial vehiclesEstate
Driver only000
Driver with one front passenger110
Driver with one front passenger and one rear passenger1–1
Driver with one front passenger, two or
three rear passengers,
with or without luggage
2–2
Driver with luggage or load reaching the maximum permissible all-up weight
333
A

Downloaded from www.Manualslib.com manuals search engine
wipers ...................................................(up to the end of the DU)windscreen washer ...............................(up to the end of the DU)
1.81
ENG_UD10543_1Essuie-vitre / lave-vitre avant (X85 - B85 - C85 - S85 - K85 - Renault)\
ENG_NU_853-3_BCSK85_Renault_1
Wash/Wipe
Vehicles with automatic wiper
function
With the engine running, move
stalk 1
–
A park.
–
B automatic wiper functionWhen this position is selected, the system detects the presence of water on the windscreen and triggers wiping at a suitable wiping speed.It is possible to modify the sensitivity
by turning ring 2.
–
C normal wiping speed.
–
D fast wiping speed.Special note
When the vehicle is being driven, the wiping speed slows down whenever the vehicle stops. The speed will change from fast wiping speed to normal wiping speed.
As soon as the vehicle moves off, wiping will return to the speed originally selected.
Any action on stalk
1 overrides and cancels automatic operation.
With the ignition on, move stalk 1
–
A park.
–
B intermittent wipingThe wipers will pause for several seconds between sweeps. It is pos- sible to change the time between
sweeps by turning ring 2.
–
C normal wiping speed.
–
D fast wiping speed.
WINDSCREEN WASH/WIPE (1/2)
A
B
C
D
121
When working in the engine compartment, ensure that the windscreen wiper stalk
is in position A (park).
Risk of injury.

Downloaded from www.Manualslib.com manuals search engine
1.82
ENG_UD10543_1Essuie-vitre / lave-vitre avant (X85 - B85 - C85 - S85 - K85 - Renault)\
ENG_NU_853-3_BCSK85_Renault_1
Before any action involving
the windscreen (washing the vehicle, de-icing, clean- ing the windscreen, etc.)
return stalk 1 to position A (park).
Risk of injury and/or damage.
Windscreen washer,
headlight washers(depending on vehicle)
With the ignition on, pull stalk 1 to- wards you.
– Headlights off
A short press triggers one sweep cycle of the wiper.
A longer press triggers three sweeps followed by a final sweep after sev- eral seconds.
– Headlights on
The headlight washers will be acti- vated at the same time.
WINDSCREEN WASH/WIPE (2/2)
A
B
C
D
11In freezing or snowy weather, ensure they are not stuck to the windscreen (including the central area located behind the interior rear-view mirror) and the rear screen before starting the wipers (risk of motor overheat- ing).
Check the condition of the wiper blades. You are responsible for their service life:
– they must remain clean: clean the blades, windscreen and rear screen regularly with soapy water;
– do not use them when the wind- screen or rear screen are dry;
– free them from the windscreen or rear screen when they have not been used for a long time.In all cases, replace them as soon as they begin to lose efficiency: ap-
proximately once a year.Before using the rear wiper, check that no object obstructs the travel of the blade.Do not use the wiper arm to open or close the tailgate.

Downloaded from www.Manualslib.com manuals search engine
wipers ...................................................(up to the end of the DU)windscreen washer ...............................(up to the end of the DU)
1.83
ENG_UD10544_1Essuie-vitre / Lave-vitre arrière (X85 - B85 - C85 - S85 - K85 - Ren\
ault)ENG_NU_853-3_BCSK85_Renault_1
pRear screen wash/wipe
With the ignition on, turn the end of stalk 1 to align mark 2 with the symbol.
When the stalk is released, it returns to the rear wipe position.
Special note
If the windscreen wipers are operat- ing or are in automatic mode, the rear screen wiper wipes intermittently when
reverse gear is engaged.
YSpeed-dependent
timed rear screen
wiper
With the ignition on, turn the end of stalk 1 to align mark 2 with the symbol.Wiping frequency varies with speed.
REAR SCREEN WASH/WIPE
12
In freezing or snowy weather, ensure they are not stuck to the windscreen (including the central area located behind the interior rear-view mirror) and the rear screen before starting the wipers (risk of motor overheat- ing).
Check the condition of the wiper blades. You are responsible for their service life:
– they must remain clean: clean the blades, windscreen and rear screen regularly with soapy water;
– do not use them when the wind- screen or rear screen are dry;
– free them from the windscreen or rear screen when they have not been used for a long time.In all cases, replace them as soon as they begin to lose efficiency: ap-
proximately once a year.Before using the rear wiper, check that no object obstructs the travel of the blade.Do not use the wiper arm to open or close the tailgate.
Before any action on the windscreen (washing the vehicle, de-icing, cleaning the windscreen, etc.) return
stalk 1 to the park position.
Risk of injury or damage.
When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position.
Risk of injury.

Downloaded from www.Manualslib.com manuals search engine
fuel tank capacity ..................................(up to the end of the DU)fuelgrade ...............................................(up to the end of the DU)fuelfilling ................................................(up to the end of the DU)fuel tankcapacity ............................................................(current page)fuel filler cap .........................................(up to the end of the DU)
1.84
ENG_UD14663_2Réservoir carburant (X85 - B85 - C85 - S85 - K85 - Renault)ENG_NU_853-3_BCSK85_Renault_1
JauneNoirNoir texte
Fuel grade
Use a high grade fuel that complies with the standards currently in force in each country.
Diesel version
It is essential to use diesel fuel that conforms to the specifications given on the label inside fuel filler flap A.Make sure that no water accidentally enters the fuel tank during filling. The closure and its surrounding area must be dust-free.
Fuel tank (filling with fuel)
Do not mix even small amounts of petrol (unleaded or E85) with diesel.
Do not use ethanol-based fuel if your vehicle is not compatible with this fuel.
Capacity of the fuel tank: 55 litres approximately.
To open fuel filler flap
A, place your
finger in opening 1 and pull the flap.
For details on filling the fuel tank, refer to the information on “Filling up with fuel”.
There is a cap holder
2 on the fuel filler flap for holding the cap when the tank is being filled.
FUEL TANK (1/2)
A
1
2
Fuel filler cap: this is spe- cific to the vehicle type. If you have to replace it, make sure the new cap is of the same type.
Contact your approved Dealer.
Never place the cap near a source
of heat or flame.
Do not wash the filler area with a high-pressure washer.