ESP RENAULT KANGOO 2013 X61 / 2.G ABS Bosch 8.1 Workshop Manual

38C-20
AFTER REPAIRClear the computer memory using command RZ001 Fault memory.
Carry out a road test followed by another check with the diagnostic tool.
V1 MR-376-X76-38C000$090.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Interpretation of faults38C
ABS BOSCH 8.1
Vdiag No.: 18
DF017
CONTINUED
Clear the computer memory using command RZ001 Fault memory, exit fault finding and switch off the ignition.
Carry out a new check using the diagnostic tool.
If the fault is still present, contact the Techline.
2.DEF
NOTESNone.
Use command VP004 Vehicle parameters on the fault finding tool to define the appropriate version for the
vehicle type. You must select the version that corresponds to the vehicle type.
Check that the vehicle parameters are included in the parameter PR063 Vehicle parameters.
If the fault is still present, contact the Techline.

38C-28
AFTER REPAIRClear the computer memory using command RZ001 Fault memory.
Carry out a road test followed by another check with the diagnostic tool.
V1 MR-376-X76-38C000$090.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Interpretation of faults38C
ABS BOSCH 8.1
Vdiag No.: 18
DF063
PRESENT
OR
STOREDWHEEL SPEED CONSISTENCY
1.DEF: Interference
NOTESPriorities when dealing with a number of faults :
Deal with faults DF006 Front left-hand wheel speed sensor circuit, DF007 Rear left-
hand wheel speed sensor circuit, DF026 Front right-hand wheel speed sensor
circuit and DF027 Rear right-hand wheel speed sensor circuit first even if they are
stored.
Conditions for applying the fault finding procedure to stored faults:
The fault is declared present during a road test.
Check the condition of the braking system (condition of linings, sealing, grating, bleed, etc.).
Check the condition of the axles and the conformity and good condition of the tyre mountings.
Check how well the wheel speed sensors are fitted (correct clipping).
Repair if necessary.
If the fault is still present, contact the Techline.
ABS8.1X76_V18_DF063