air bleeding RENAULT KANGOO 2013 X61 / 2.G ABS Bosch 8.1 Workshop Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2013, Model line: KANGOO, Model: RENAULT KANGOO 2013 X61 / 2.GPages: 57, PDF Size: 1.44 MB
Page 43 of 57
38C-43
AFTER REPAIRClear the computer memory using command RZ001 Fault memory.
Carry out a road test followed by another check with the diagnostic tool.
V1 MR-376-X76-38C000$150.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Interpretation of commands38C
ABS BOSCH 8.1
Vdiag No.: 18
SC006BLEEDING THE HYDRAULIC UNIT AND BRAKE CIRCUITS
NOTESConditions of use of the command:
Ignition on, engine stopped and vehicle speed zero.
Before running the command, check that the battery is properly charged (see 80A,
Battery, Battery: Customer complaints).
This command must be used only in the event of abnormal lengthening of brake pedal travel during a road test with
ABS regulation (the vehicle must have already been bled using the conventional procedure).
Select command SC006 and follow the instructions given by the diagnostic tool.
ABS8.1X76_V18_SC006
Page 54 of 57
38C-54
AFTER REPAIRClear the computer memory using command RZ001 Fault memory.
Carry out a road test followed by another check with the diagnostic tool.
V1 MR-376-X76-38C000$170.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Fault Finding Chart38C
ABS BOSCH 8.1
Vdiag No.: 18
ALP8Extension of brake pedal travel following a regulation phase (with
an irregular pedal when entering regulation).
NOTESOnly address this customer complaint after a complete check with the diagnostic
tool.
Air transit from the hydraulic unit regulation channels to the brake circuits.
Bleed the circuits following the recommended procedure in MR 374, Mechanical, 30A, General information,
Braking circuit: Bleeding (use of diagnostic tool command modes).
After the operation, carry out a road test with ABS regulation.
If the fault persists, carry out the above operation again once or twice.
If the customer complaint is particularly pronounced, and the bleeds have not rectified it, contact the Techline.
ABS8.1X76_V18_ALP8