wiring RENAULT KANGOO 2013 X61 / 2.G Access Security User Guide

82D-45
AFTER REPAIRCarry out a complete check with the diagnostic tool.
V1 MR-376-X76-82D000$170.mif
ACCESS - SECURITY
Fault finding – Fault finding chart82D
UCH
Vdiag No.: 0F
ALP 8
CONTINUED 2
Check for earth on the following connections:
For the driver's electric window:
–MK of component 132,
For the passenger electric window:
–MK of component 133,
For the driver's electric window control for the front
passenger window:
–MK of component 532.
Are the connections correct?If the connection or connections are
faulty and there is a repair procedure
(see Technical Note 6015A,
Electrical wiring repair, Wiring:
Precautions for repair), repair the
connector, otherwise replace the
wiring.
B
NO
C
YES

82D-46
AFTER REPAIRCarry out a complete check with the diagnostic tool.
V1 MR-376-X76-82D000$170.mif
ACCESS - SECURITY
Fault finding – Fault finding chart82D
UCH
Vdiag No.: 0F
ALP 8
CONTINUED 3
Check the continuity, insulation and absence of interference resistance on the following connections:
For the driver's electric window:
–AP1 between components 260 and 132,
–21A between components 203 and 132,
–21B between components 203 and 132,
For the passenger electric window:
–LPD between components 260 and 133,
–22A between components 204 and 133,
–22B between components 204 and 133,
For the driver's electric window control for the front passenger window:
–AP2 between components 260 and 532,
–22C between components133 and 532,
–22D between components133 and 532.
Are they correct?
Replace the motor of the electric window control
concerned.
If the connection or connections are faulty and
there is a repair procedure (see Technical
Note 6015A, Electrical wiring repair, Wiring:
Precautions for repair), repair the connector,
otherwise replace the wiring.
If the fault is still present, contact Techline
C
YESNO

82D-47
AFTER REPAIRCarry out a complete check with the diagnostic tool.
V1 MR-376-X76-82D000$170.mif
ACCESS - SECURITY
Fault finding – Fault finding chart82D
UCH
Vdiag No.: 0F
ALP 9 The electric door locking/unlocking control operates erratically
Check the condition and connection of the UCH connector, component code 645 and the electric door locking
control connector, component code 123.
If the connection or connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace it.
For locking:
Check the continuity and the insulation of the following connections:
–20A between components123 and 645,
–MK between components 123 and earth.
If the connection or connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace it.
A
UCH_V0F_ALP09

82D-48
AFTER REPAIRCarry out a complete check with the diagnostic tool.
V1 MR-376-X76-82D000$170.mif
ACCESS - SECURITY
Fault finding – Fault finding chart82D
UCH
Vdiag No.: 0F
ALP 9
CONTINUED
For unlocking:
Check the continuity and the insulation of the following connections:
–20B between components123 and 645,
–MK between components 123 and earth.
If the connection or connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace it.
If the fault is still present, contact Techline.
A