diagram RENAULT KANGOO 2013 X61 / 2.G Instrument Panel Instruments Owner's Manual

83A-56
AFTER REPAIRCheck for correct operation.
V1 MR-376-X76-83A000$070.mif
INSTRUMENT PANEL INSTRUMENTS
Fault finding – Fault Finding Chart83A
ALP24There is no instrument panel display when the ignition is
switched on
NOTESSee Wiring Diagrams Technical Note for Kangoo VLL.
Check the condition of fuses F6 and F16 in the passenger compartment fuse box, component code 260.
Check for +12 V on connection BP10 and for + after ignition on connection AP10 of the instrument panel,
component code 247.
Check for earth on connection MK of the instrument panel, component code 247.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring, otherwise replace it.
If the fault is still present, contact the techline.

83A-57
AFTER REPAIRCheck for correct operation.
V1 MR-376-X76-83A000$070.mif
INSTRUMENT PANEL INSTRUMENTS
Fault finding – Fault Finding Chart83A
ALP25The trip computer or the trip meter or clock reset to zero each
time the ignition is switched off
NOTESSee Wiring Diagrams Technical Note for Kangoo VLL.
Check the condition of fuses F6 and F16 in the passenger compartment fuse box, component code 260.
Check for +12 V on connection BP10 and for + after ignition on connection AP10 of the instrument panel,
component code 247.
Check for earth on connection MK of the instrument panel, component code 247.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring, otherwise replace it.
If the fault is still present, contact the techline.

83A-58
AFTER REPAIRCheck for correct operation.
V1 MR-376-X76-83A000$070.mif
INSTRUMENT PANEL INSTRUMENTS
Fault finding – Fault Finding Chart83A
*CPE: Electric central door locking
ALP26The opening elements warning light does not illuminate (without
electric central door locking*)
Message transmitted by: UCH
NOTESSee Wiring Diagrams Technical Note for Kangoo VLL.
Run fault finding on the UCH, component code 645.
Deal with any other faults.
Check that when the rear doors or the luggage compartment are opened, status ET551 Rear doors or luggage
compartment is OPEN and that when the rear doors or the luggage compartment are closed, status ET551 is
CLOSED.

Check that when each front door is opened, status ET489 Front doors is OPEN, and that when the rear doors or
the luggage compartment are closed, status ET551 is CLOSED.
If this is not the case (see87A, Passenger compartment connection unit, Interpretation of statuses).
If the fault is still present, check the insulation, continuity and the absence of interference resistance on the
following connection:
–13A between components 247 and 645.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring, otherwise replace it.
If the fault is still present, contact the techline.

83A-59
AFTER REPAIRCheck for correct operation.
V1 MR-376-X76-83A000$070.mif
INSTRUMENT PANEL INSTRUMENTS
Fault finding – Fault Finding Chart83A
*CPE: Electric central door locking
ALP27The opening elements warning light does not illuminate (with
electric central door locking*)
Message transmitted by: UCH
NOTESSee Wiring Diagrams Technical Note for Kangoo VLL.
Run fault finding on the UCH, component code 645.
Deal with any other faults.
Check that when the rear doors or the luggage compartment are opened, status ET551 Rear doors or luggage
compartment is OPEN and that when the rear doors or the luggage compartment are closed, status ET551 is
CLOSED.

Check that when each front door is opened, status ET489 Front doors is OPEN, and that when the rear doors or
the luggage compartment are closed, status ET551 is CLOSED.
If this is not the case (see87A, Passenger compartment connection unit, Interpretation of statuses).
If the fault is still present, check the insulation, continuity and the absence of interference resistance on the
following connection:
–87H between components 247 and 645.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring, otherwise replace it.
If the fault is still present, contact the techline.