roof RENAULT KANGOO 2013 X61 / 2.G Mechanism And Accessories Workshop Manual

NON-SIDE OPENING ELEMENT
MECHANISMS
Exterior handle for rear door
Rear screen wiper motor
Rear door lock
Rear door latches
Exterior handle for tailgate
Hinged rear roof flap cross member51-1
51-2
51-3
51-4
51-5
51-6
51-7
51-8
51-9
51-10
51-12 Pages
Contents
Safety
Tooling
SIDE OPENING ELEMENT
MECHANISMS
Window winder handle on front
door
Door opening handle - interior,
front door
Door opening handle - exterior,
front door
Front door lock
Front door window riser
Door barrels
Interior handle for opening the
sliding door
Exterior handle for sliding door
Locking warning light and sliding
door lock
Sliding door runners
Adjusting the sliding doorWINDOWS
Tilting or fixed windows in sliding
door
Fixed or moving side window
Window in rear door and window in
tailgate
Moving window/latch
EXTERIOR PROTECTION
Roof protection strip
Bumpers
Side protection strips
Protective panel at rear
51
55
54
Mechanisms and
accessories
50-1
50-2 54-4
54-5
54-6
54-7
55-1
55-3
55-4
55-5 GENERAL
50
52
52-1
52-2
52-3
52-4
52-5
52-6Exterior rear view mirror
Rear view mirror
Rear screen washer jet
Number plate light56-1
56-2
56-3
56-4 EXTERIOR ACCESSORIES
Dashboard 57-1 LOWER INTERIOR ACCESSORIES
56
57
Pages
59-1
59-2 Upper storage compartment in cab
Front seat belts
Rear seat belts
59
58-1 UPPER INTERIOR ACCESSORIES
58
INTERIOR SAFETY ACCESSORIES WINDOWS
Windscreen
Front door window54
54-1
54-3

GENERAL
Tooling
50A
99331S
Tool for removing the external rear view mirror
glass Car. 1363 - Part Number 00 00 136 300.
This tool may also be used for removing roof trim
and exterior door weatherstrips.
99799S
Door window winder handles may also be remo-
ved. (First affix a small piece of masking tape to
the door panel to avoid damaging it during remo-
val.)
The pliers have one flat and one bent nose, giving
easy access to remove clips without damaging
them. The heads of the clips are not deformed,
enabling them to be re-used when refitting.
12776S
Tool for removing door hinge.
Car. 1415 - Part Number 00 00 141 500
SODICAM clip removal pliers.
Using these pliers it is easy to remove "fir-tree"
clips and interior trim clips such as on door panels,
soundproofing mats and mudguard mountings.
50-2

NON-SIDE OPENING ELEMENT MECHANISMS
Hinged rear roof flap cross member
Remove blanking cover and securing nut (A).
Release linkage (B) from its location.
Remove mounting fittings for cross member (C).
52
PRB5204
REMOVING
13247R
52-6

EXTERIOR PROTECTION
Roof protection strip
Use a flat screwdriver to press point (A).
Unclip protection strip.
NOTE: So that the instructions are clearer, the
protection strip is shown from above.
55
REMOVING
PRB5501
13115R
REFITTING
13245R
Fit the clip on the retaining lug (B).
55-1

EXTERIOR PROTECTION
Roof protection strip
For the version with the hinged rear roof flap,
section (C) of the protection strip will need to be
cut according to the dimension shown below:
C = 610 mm
55
Fit the clip in position.
Position the protection strip and clip it in place.
PRB5502
13246R
55-2