battery replacement RENAULT KANGOO 2013 X61 / 2.G Power Steering Pump Assembly Workshop Manual

36B-9V1 MR-376-X76-36B000$070.mif
36B
GEPDA
Vdiag No.: 04
Precautions for use
●The power-assisted steering pump assembly (the computer, the electric motor, the hydraulic pump, the oil
reservoir) cannot be separated.
OPERATIONS FOR REPLACING THE PUMP ASSEMBLY
Before replacing the power-assisted steering pump assembly, perform fault finding on the system and apply the
appropriate fault finding procedure.
The power-assisted steering pump assembly may only be replaced after approval from Techline.
After replacing the pump assembly, calibrate the computer using the diagnostic tool.
When replacing the power-assisted steering pump assembly, perform the following operations:
●disconnect the vehicle battery,
●replace the power-assisted steering pump assembly (see MR 423 Mechanical, 36B, Power-assisted steering,
Power-assisted steering pump assembly: Removal - Refitting),
●reconnect the vehicle battery,
●connect the diagnostic tool, switch on the ignition and establish dialogue with the computer of the power-assisted
steering pump assembly,
●Enter the vehicle VIN using command VP001 Enter VIN (see Programming),
●write the date of the last After-Sales operation using command VP005 Enter After-Sales operation date (see
Programming),
●switch off the ignition for at least 15 seconds for the configurations to register, without disconnecting the battery,
●switch on the ignition and establish dialogue with the computer of the power-assisted steering pump assembly,
●check that there are no faults and that the parameters are correct,
●start the vehicle engine and check that the power-assisted steering pump assembly is operating correctly (power-
assisted steering available with the engine running),
●check that there are no faults and that the parameters are correct. WARNING:
To prevent any accidents, it is essential to disconnect the battery when performing operations on the front axle,
regardless of the operation, to remove the risk of trapping someone between a wheel and the body if the power-
assisted steering is accidentally triggered due to a fault in the pump assembly system.
POWER-ASSISTED STEERING PUMP ASSEMBLY
Fault finding – Replacement of components