clock reset RENAULT KANGOO 2016 X61 / 2.G Owners Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2016, Model line: KANGOO, Model: RENAULT KANGOO 2016 X61 / 2.GPages: 173, PDF Size: 3.8 MB
Page 53 of 173
JauneNoirNoir texte
1.47
ENG_UD7265_1
Tableau de bord : afficheurs et indicateurs (X76 - Renault)
ENG_NU_854-2_X76LL_Renault_1
Multifunction key 5
Depending on the vehicle, repeatedly
pressing
button 5 allows information to
be brought up on the display, the trip
mileage recorder to be reset (the trip
mileage recorder must be selected on
the display for this operation) or the
clock to be set.
–
Display selection
Press briefly to move from the total mile-
age to the trip mileage and vice versa.
–
Resetting the trip mileage recor-
der
With the display of the trip mileage re-
corder selected, press and hold the
button.
INSTRUMENT PANEL: display and indicators (2/2)
5
Low engine oil level warning
Display A informs the driver that the
engine oil level is low when the engine
is started. This warning lasts for 30 sec-
onds. Refer to the information on the
“Engine oil level” in Section 4.
A
Page 54 of 173
clock ..................................................... (up to the end of the DU)
clock ..................................................... (up to the end of the DU)
1.48
ENG_UD7267_1
Heure (X76 - Renault)
ENG_NU_854-2_X76LL_Renault_1
Clock
If the electrical supply is cut (battery
disconnected, broken supply wire,
etc.), the clock will lose its time set-
ting. The clock must be reset.
CLOCK
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
Clock 1
Resetting the clock
With the ignition on , and display 1
set to total mileage recorder and clock,
p
ress and hold button 2 , to access
“clock setting” mode (clock flashes)
then release the button.
–
Pressing and holding button 2 allows
you to scroll through the hours and
minutes quickly;
–
short presses on button 2 allow you
to set the time minute by minute.
1
2