display RENAULT MEGANE 2017 4.G R Link 2 Owners Manual

1.4
Function
1 Short press: On/Off.
Press and hold (around 5 seconds): resetting of the system to the fac-\
tory settings.
2 Volume up.
3 Volume down.
4 Access to home pages.
5 Access to the settings menu for driving assistance devices.
6 Access to the settings menu for the displays.
INTRODUCTION TO THE CONTROLS (1/5)
Screen controls 1
1
4
5
6
2
3

1.6
INTRODUCTION TO THE CONTROLS (3/5)
Screen controls 3
Screen controls 4
Function
11 Access to home pages.
12 Activate the standby screen.
13 Short press: On/Off.
Press and hold (around 5 seconds): resetting of the system to the fac-\
tory settings.
Rotate: adjust the volume of the source currently in use.
14 Access to the driving assistance systems settings menu or access to
the user settings.
15 Access to the settings menu for the displays.
16 Short press: On/Off.
Press and hold (around 5 seconds): resetting of the system to the fac-\
tory settings.
17 Volume up.
18 Volume down.
1112131415
16
17
18
11
14
15

1.9
Gesture interaction
– Tap: touch a part of the screen with your finger and then take the finger
off from the screen.
– Double tap: touch a part of the screen and then touch the same part again
all within 1 second.
– Long tap: touch a part of the screen for 1 second or longer.Multifunction capacitive
touchscreen 1
Navigating a menu
The touchscreen 1 grants access to
the system functions. Touch the touch-
screen 1 to open a menu or slide your
finger from top to bottom to move from
one page to another. A vertical scroll
bar is displayed on the screen.
OPERATING PRINCIPLES (1/5)
1
For safety reasons, carry
out these operations when
the vehicle is stationary.
1
– Panning: touch the screen with a finger and swipe across the screen.
– Fast sweep (“swipe”): slide your finger quickly from one point to an-
other.
– Drag and drop: touch a part of the screen for one second or longer
while moving an object.
– Pinch in/out: bring your two fingers close or slide them apart on the
screen.
1

1.10
For safety reasons, carry
out these operations when
the vehicle is stationary.
3
2
4
Screen controls
Shortcut to a menu
1: Multifunction capacitive touchscreen.
2: Go to the home pages.
3: Go to the driving aids settings menu or go to the user settings menu.
4: Go to the display settings menu.
5: Go to the “Easy park assist” menu.
OPERATING PRINCIPLES (2/5)
5
2
3
Videos show demonstrations on
how to use:
– the touchscreen;
– the Multi-Sense;
– driving aids.
With the vehicle at a standstill, press
the relevant pop-up menu button,
then “About”.
A video shows a demonstration on
how to use the multimedia system
and its touchscreen. With the vehi-
cle at a standstill, press “Menu” on
the home screen, then press the
pop-up menu button and “About”.
1
3
2
4
11

1.11
– press the joystick 8 to open the se-
lected element;
– in the tabs menus, move the joy- stick 8 left or right to switch from one
tab to another.
Confirming/cancelling a selection
Press the joystick 8 to confirm a change.
Press the button 6 to cancel your choice
and return to the previous menu.
Press the button 7 to go back to the
home page.
OPERATING PRINCIPLES (3/5)
76
8
Central control
Navigating a menu
Use the joystick 8 to move around the
different screens:
– Move the joystick 8 up or down to
move around the different areas of
the screen (upper bar, central zone,
lower bar);
– turn the joystick 8 to search the list or
zoom in/out map;
Screen controls
Shortcut to a menu
1: Multifunction capacitive touchscreen.
2: Go to the home pages.
3: Go to the driving aids settings menu or go to the user settings menu.
4: Go to the display settings menu.
234
1

1.13
OPERATING PRINCIPLES (5/5)
12
Menu
Phone Multimedia
Apps
Navigation
Vehicle System
Log In
Presentation of the
instructions provided with
your multimedia system
You can view the instructions for your
“R-Link 2” multimedia system from
the multimedia screen by pressing the
button 12, then “User manual”.
Menu
Navigation Multimedia
Phone
Apps Vehicle System
Log In
12
Introduction to the main
menu
To access the main menu, press “Menu”
from the home page. The system is
made up of six major sections, all of
which can be accessed from the main
menu:
– the “Navigation” function includes all the satellite guidance functions, road
maps and traffic information;
– the “Multimedia” function enables the management of radio, audio and
video playback;
– the “Phone” function is used to pair the system to one or more mobile
phones and to use the hands-free
mode;
– the “Application” includes applica- tions and the online R-Link Store
store;
– the “Vehicle” function includes the management of certain equipment
such as the reversing camera,
Driving eco2 etc.; ;
– the “System” function is used for ad- justing various settings on the mul-
timedia system, e.g. display, lan-
guage, etc.
Connect your multimedia
system
Activate your connected services by
pressing button 11 to obtain the appli-
cations from the R-Link Store.
11
11

1.14
ON/OFF (1/2)
Switching on
The multimedia system switches on
automatically when the ignition is
switched on. In other cases, press the
on/off button.
At start-up, the system enables you to
set certain functions:
– Press “Privacy” to allow or reject ap-plications to share data related to
your journey.
– Press “OK” to allow data sharing. – Press “Profile” to change the user
profile.
– Press “Language” to change the system language.
Switching off
With the ignition off, the system is deac-
tivated automatically when the driver’s
door is opened.
With the ignition on, press the On/Off
button on your multimedia system.
Safety and Data sharing
No data sharing
Warning: always drive safely and obey local traffic
regulations.
You have chosen to share information outside of this
vehicle. You can change this setting at any time in the Apps menu.
Privacy OK
Language
Profile
Options
Clock/temperature screen
This screen is displayed when the
driver’s door is opened, before the ig-
nition is switched on.
It can also be displayed when the
system is stopped: with the ignition on,
press the on/off button on your system.
The system then stops the guidance
and turns the sound off.
A screen showing the time is displayed.

1.17
ADD, MANAGE WIDGETS (2/2)
For safety reasons, carry
out these operations when
the vehicle is stationary.
There are two sizes of widget (small
and big). Some applications may
only have one size. The number
of widgets displayed on the home
screen may vary depending on the
format of the multimedia screen.
Delete widgets
To delete a widget, press “X” at the top
right of this latter. A confirmation mes-
sage is displayed on the screen. Press
“Yes” to confirm the deletion.

1.23
USING VOICE RECOGNITION (6/9)
“Points of interest”
To search for a point of interest using
voice control:
– press the voice control button to dis-play the main voice control menu;
– say “Destination” after the beep;
– after a second bleep, say “points of interest”;
– search for a point of interest (petrol station, car park etc.);
– search for the place where the place of interest is.
For further information about using
points of interest, please refer to the
section on “Entering a destination”.Using favourites with voice
recognition
The favourite contacts added to your
home pages with a saved telephone
number or address can be called di-
rectly using voice recognition. To do
this:
– press the voice control button to dis- play the main voice control menu;
– say “Display my favourites” after the beep.
The system displays the saved
favourite(s).
– Say the “favourite” you want to use (e.g.: if the “Favourites” saved is
“Jane”, say “Call Jane” or “Go to
Jane”).
Controlling radio with voice
recognition
You can activate the radio using the
voice control included in your multime-
dia system. To do this:
– press the voice control button to dis-play the main voice control menu;
– say “Radio” after the beep, then the radio band you wish to listen to (FM
or AM):
– “FM";
– “AM";
– “DR".
– Say the desired frequency (for exam- ple “Listen to 94.4”) or your choice
of search mode to find a radio sta-
tion: stations (not available for AM)
or "Presets” (for example “Listen to
preset 1”);
To change the band while listening, say
“change band” in the radio menu.

1.24
To change the audio source, say
“change source” from the “Media
menu”.
USING VOICE RECOGNITION (7/9)
Voice menu
Leave Help
Controlling multimedia with
voice recognition
You can launch audio media (an audio
track, playlists, etc.) using the voice
control included with your multime-
dia system. Possible auxiliary audio
sources are:
– “USB-1" (USB port);
– “USB-2" (USB port);
– “SD” (SD card);
– “CD" (audio CD or MP3);
– “AUX-1" (Jack socket);
– “AUX-2" (Jack socket). To do this:
– press the voice control button to dis-
play the main voice control menu;
– say “Media” after the beep;
– say the auxiliary audio source you wish to use, then the file to play/open
(e.g.: “Songs”, “Playlists”, etc.).
Depending on the source selected, you
can:
– search for and play music by artist name, song, album, playlist, pod-
cast, genre or file;
– play the next/previous track;
– shuffle playback/play all.
To display the requested media/file
on the multimedia system screen, say
“display” before saying the filename to
play/open.
To play a song and exit the voice rec-
ognition menu, say “play” before saying
the song title or artist name.
Precautions regarding
navigation
Use of the navigation
system does not in any way
replace the responsibility or vigi-
lance of the driver when driving the
vehicle.
Destination
Phone
My apps Radio