open bonnet RENAULT MEGANE SCENIC 1995 Service Repair Manual

ENGINE AND PERIPHERALS
Engine - Gearbox
10
F (E) engine
Move the power assisted steering pump and the
air conditioning compressor away (without
opening the circuits).
Remove the air conditioning low pressure pipe
clip on the suspended gearbox mounting.
Remove the bonnet.
Remove the engine tie-bar.
99308R4
Position the load positioning tool.
Lift the engine to remove the suspended engine
mountings adn gearbox.
Remove the engine.
REFITTING
Refitting is the reverse of removal.
For the accessories belt tension (see section 07).
Fit the suspended engine mounting cover and the
movement limiter assembly.
ADJUSTING THE LONGITUDINAL MOVEMENT
LIMITER
Slacken the two limiter bolts (E).
Insert the fork for centring the limiter Mot. 1289-
03 into the openings in the suspended engine
mounting cover.
99166-1R
Tighten the two limiter bolts (E) to a torque of
6 daN.m.
Fill the gearbox and cooling circuit and bleed the
circuit (see section 19).
Fit the brake caliper bolts with Loctite
FRENBLOC and tighten to the correct tor-
que.
Press the brake pedal several times to bring the
pistons back into contact with the pads.
NOTE: ensure the heat shields are correctly
positioned.
10-13

48
NON-SIDE OPENING ELEMENTS
Bonnet (A)

48
NON-SIDE OPENING ELEMENTS
Bonnet hinges (B)

73
NON-SIDE OPENING ELEMENTS TRIM
Bonnet lining (A)

52
NON-SIDE OPENING ELEMENT MECHANISMS
Bonnet release (A)