width RENAULT MEGANE SCENIC 1995 Service Repair Manual

99311R
ENGINE AND PERIPHERALS
Sump
10
Lift the engine using the lifting ring (5) at the
timing end to ensure dimension (A) is 25 cm
between the sub-frame and the edge of the
cylinder block.
98746R
Remove:
- the sump bolts then release the sump,
- the sump, in the direction shown by the
arrow.
98748S
Clean the sump before applying a bead of
RHODORSEAL 5661, width 3 mm.
99179S
NOTE : remember to renew the two rubber seals
at the edge of the sump. Remove the two power assisted steering pipe
bolts on the sub-frame.
E7J engine
10-45

ENGINE AND PERIPHERALS
Sump
10
K7M engine
aluminium
sump
REMOVAL
To remove the aluminium sump, the engine and
transmission assembly must be removed.
NOTE : remember to renew the two rubber seals
at the edge of the sump. Sump bolt 0.7 to 0.9
TIGHTENING TORQUES (in daN.m)
REFITTING
Clean the sump before applying a bead of
RHODORSEAL 5661 (eg- CAF 4/60 TIXO), width3
mm.
99179S
10-47

ENGINE AND PERIPHERALS
Sump
10
REFITTING
Clean the sump before applying a bead of
RHODORSEAL 5661 (eg- CAF 4/60 TIXO), width3
mm.
99179S
NOTE : remember to renew the two rubber seals
at the edge of the sump.
Refitting is the reverse of removal. K7M engine
steel sump
10-52