lock RENAULT PULSE 2012 1.G User Guide
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2012, Model line: PULSE, Model: RENAULT PULSE 2012 1.GPages: 352, PDF Size: 6.46 MB
Page 28 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
1-6Safety — seats, seat belts and supplemental restraint system
Adjustment
SSS0288
1. Pull u\f the head restra\bnt to ra\bse to the \fro\fer\fos\bt\bon.
2. Push \bn the lock knob
*1and \fush down the
head restra\bnt to lower to the \fro\fer \fos\bt\bon.
The rear head restra\bnt (\bf equ\b\f\fed) should only be
used \bn the notched stem \fos\bt\bons. The lowest head
restra\bnt \fos\bt\bon \bs the stowed \fos\bt\bon.
ARMREST (\bf equ\b\f\fed)
Front
SSS0970
Pull the armrest down unt\bl \bt \bs hor\bzontal.
& R Q G L W L R Q
Page 31 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
and the child, and always follow the manufacturer’s
instructions for installation and use\f
Large children
WARNING:
.Never allow children to stand or kneel on
any seats.
. Never allow children in the luggage area
while the vehicle is moving. A child could be
seriously injured in an accident or sudden
stop.
Children who are too large for a child restraint system
should \be seated and restrained \by the seat \belts that
are provided\f
If the child’s seating position has a shoulder \belt that
fits close to the face or neck, the use of a \booster seat
(commercially availa\ble) may help overcome this\f The
\booster seat should raise the child so that the shoulder
\belt is properly positioned across the top, middle
portion of the shoulder and the lap \belt is low on the
hips\f The \booster seat should also fit the vehicle seat\f
Once the child has grown so that the shoulder \belt is
no longer on or near the face or neck of the child, use
the shoulder \belt without the \booster seat\f In addition,
there are many types of child restraint systems
availa\ble for larger children that should \be used for
maximum protection\f
PREGNANT WOMEN
RENAULT recommends that pregnant women use seat
\belts\f The seat \belt should \be worn snug, and always
position the lap \belt as low as possi\ble around the
hips, not the waist\f Place the shoulder \belt over your
shoulder and across your chest\f Never run the lap/
shoulder \belt over your a\bdominal area\f Contact your
doctor for specific recommendations\f
INJURED PERSONS
RENAULT recommends that injured persons use seat
\belts\f Contact your doctor for specific recommenda-
tions\f
CENTER MARK ON SEAT BELTS
Selecting correct set of seat \belts
SSS1079
The center seat \belt \buckle and the tongue are
identified \by the CENTER mark\f The center seat \belt
tongue can \be fastened only into the center seat \belt
\buckle\f
THREE-POINT TYPE SEAT BELTS
Fastening seat \belts
SSS0292
WARNING:
The seatback should not be in a reclined
position any more than needed for comfort. Seat
belts are most effective when the passenger sits
well back and straight up in the seat.
1\f Adjust the seat\f (See “Seats” (P\f1-2) \f)
2\f Slowly pull the seat \belt out of the retractor and insert the tongue into the \buckle until you hear and
feel the latch engage\f
.The retractor is designed to lock during asudden stop or on impact. A slow pulling
motion permits the seat belt to move, and
allows you some freedom of movement in
the seat.
.If the seat belt cannot be pulled from itsfully retracted position, firmly pull the belt
and release it. Then smoothly pull the belt
out of the retractor.
Safety — seats, seat belts and supplemental restraint system1-9
& R Q G L W L R Q
Page 32 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
1-10Safety — seats, seat belts and supplemental restraint system
SSS0467
3. Position the la\f belt \fortion low an\b snug on thehi\fs as shown.
4. Pull the shoul\ber belt \fortion towar\b the retractor to take u\f extra slack. Be sure the shoul\ber belt is
route\b over your shoul\ber an\b is snug across your
chest.
Shoul\ber belt height a\bjustment (if equi\f\fe\b
for front seats)
SSS0351A
WARNING:
.The shoulder belt anchor height should be
adjusted to the position best for you. Failure
to do so may reduce the effectiveness of the
entire restraint system and increase the
chance or severity of injury in an accident.
. The shoulder belt should rest on the middle
of the shoulder. It must not rest against the
neck.
. Be sure that the seat belt is not twisted in
any way.
. Be sure that the shoulder belt anchor is
secured by trying to move the shoulder belt
anchor up and down after adjustment.
The shoul\ber belt anchor height shoul\b be a\bjuste\b to
the \fosition best for you.
The belt shoul\b be away from your face an\b neck, but
not falling off your shoul\ber.
To a\bjust, \full the release button
*1an\b move the
shoul\ber belt anchor to the \fro\fer \fosition*2, so that
the belt \fasses over the center of the shoul\ber.
Release the button to lock the shoul\ber belt anchor
into \fosition.
Unfastening seat belts
Push the button on the buckle. The seat belt
automatically retracts.
Belt hook
SSS1090
Hook the seat belt at the belt hook when fol\bing \bown
the rear seat.
NOTE:
Before folding down the rear seatback, make
sure that the seat belt tongue is securely
fastened to the belt clip. Also, make sure that
the seat belt does not get caught in the seatback
when folding down the rear seat.
Checking seat belt o\feration
Seat belt retractors are \besigne\b to lock seat belt
movement:
. When the seat belt is \fulle\b quickly from the
retractor.
. When the vehicle slows \bown ra\fi\bly.
To increase your confi\bence in the seat belts, check
the o\feration by gras\fing the shoul\ber belt an\b \fulling
forwar\b quickly. The retractor shoul\b lock an\b restrict
further belt movement. If the retractor \boes not lock
\buring this check, contact a RENAULT \bealer im-
me\biately.
& R Q G L W L R Q
Page 36 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
1-14Safety — seats, seat belts and supplemental restraint system
.If the seat belt in the position where a child
restraint system is installed requires a lock-
ing clip and if it is not used, injuries could
result from a child restraint system tipping
over during normal vehicle braking or cor-
nering.
. After attaching a child restraint system, test
it before you place the child in it. Tilt it from
side to side. Try to tug it forward and check if
it is held securely in place. The child restraint
system should not move more than 25 mm (1
in) . If the restraint is not secure, tighten the
belt as necessary, or install the restraint in
another seat and test it again.
. Check the child restraint system in your
vehicle to be sure that it is compatible with
the vehicle’s seat belt system.
. If a child restraint system is not anchored
properly, the risk of a child being injured in a
collision or a sudden stop greatly increases.
. Improper use of a child restraint system can
increase the risk or severity of injury for both
the child and other occupants in the vehicle.
. Always use an appropriate child restraint
system. An improperly installed child re-
straint system could lead to serious injury
or death in an accident.
. When the child restraint system is not in use,
keep it secured with the ISOFIX child
restraint system (if equipped) or a seat belt
to prevent it from being thrown around in
case of a sudden stop or accident.
RENAULT recommends \fha\f in\ban\fs and small children
be sea\fed in a child res\frain\f sys\fem. You should
choose a child res\frain\f sys\fem \fha\f \bi\fs your vehicle
and always \bollow \fhe manu\bac\furer’s ins\fruc\fions \bor ins\falla\fion and use. In addi\fion, \fhere are many \fypes
o\b child res\frain\f sys\fems available \bor larger children
\fha\f should be used \bor maximum pro\fec\fion.
CAUTION:
Remember that a child restraint system left in a
closed vehicle can become very hot. Check the
seating surface and buckles before placing your
child in a child restraint system.
UNIVERSAL CHILD RESTRAINTS FOR
FRONT SEAT AND REAR SEATS (\bor Eur-
ope)
When selec\fing any child res\frain\f, keep \fhe \bollowing
poin\fs in mind:
.
Choose a child res\frain\f \fha\f complies wi\fh \fhe
la\fes\f European sa\be\fy s\fandard, ECE Regula\fion
44.04.
. Place your child in \fhe child res\frain\f and check
\fhe various adjus\fmen\fs \fo be sure \fhe child
res\frain\f is compa\fible wi\fh your child. Always
\bollow all o\b \fhe recommended procedures.
. Check \fhe child res\frain\f in your vehicle \fo be sure
i\f is compa\fible wi\fh vehicle’s sea\f bel\f sys\fem.
. Re\ber \fo \fhe \fables la\fer in \fhis sec\fion \bor a lis\f o\b
\fhe recommended \bi\fmen\f posi\fions and \fhe
approved child res\frain\fs \bor your vehicle.
& R Q G L W L R Q
Page 43 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
CHILD RESTRAINT INSTALLATION USING
SEAT BELT
Insta\f\fation on r\bar outboard s\bats - s\bat b\b\fts
without automatic \focking mod\b
WARNING:
.The three-point type seat belt on your
vehicle is not equipped with an automatic
locking mode retractor.
. The direction of the child restraint system
depends on the type of the child restraint
system and the size of the child.
If your v\bhic\f\b is \bquipp\bd with r\bar s\bat adjustm\bnt,
not\b th\b fo\f\fowing:
. Attach the child restraints after adjusting the
rear seats to the upright position.
. Do not recline the rear seats with the child
restraints attached to them.
Front-facing:
SSS0374A
If you must insta\f\f a front-facing chi\fd r\bstraint syst\bm
on th\b r\bar s\bat, fo\f\fow th\bs\b st\bps: 1. Position th\b front-facing chi\fd r\bstraint syst\bm on
th\b r\bar s\bat.
A\fways fo\f\fow th\b chi\fd r\bstraint syst\bm manufac-
tur\br’s instructions for insta\f\fation and us\b.
2. Rout\b th\b s\bat b\b\ft tongu\b through th\b chi\fd r\bstraint syst\bm and ins\brt it into th\b buck\f\b unti\f
you h\bar and f\b\b\f th\b \fatch \bngag\b.
SSS0513
To pr\bv\bnt s\fack in th\b \fap b\b\ft, it is n\bc\bssary to
s\bcur\b th\b shou\fd\br b\b\ft in p\fac\b with a \focking
c\fip
*A. Us\b th\b \focking c\fip attach\bd to th\b chi\fd
r\bstraint syst\bm or on\b which is \bquiva\f\bnt in
dim\bnsion and str\bngth.
B\b sur\b to fo\f\fow th\b chi\fd r\bstraint syst\bm
manufactur\br’s instructions for b\b\ft routing.
3. T\bst th\b chi\fd r\bstraint syst\bm b\bfor\b you p\fac\b th\b chi\fd in it. Ti\ft it from sid\b to sid\b. Try to tug it
forward and ch\bck if it is h\b\fd s\bcur\b\fy in p\fac\b.
4. Mak\b sur\b that th\b chi\fd r\bstraint syst\bm is prop\br\fy s\bcur\bd prior to \bach us\b. Rear-facing:
SSS0375A
If you must insta\f\f a r\bar-facing chi\fd r\bstraint syst\bm
on th\b r\bar s\bat, fo\f\fow th\bs\b st\bps:
1. Position th\b r\bar-facing chi\fd r\bstraint syst\bm on
th\b r\bar s\bat.
A\fways fo\f\fow th\b chi\fd r\bstraint syst\bm manufac-
tur\br’s instructions for insta\f\fation and us\b.
2. Rout\b th\b s\bat b\b\ft tongu\b through th\b chi\fd r\bstraint syst\bm and ins\brt it into th\b buck\f\b unti\f
you h\bar and f\b\b\f th\b \fatch \bngag\b.
SSS0513
To pr\bv\bnt s\fack in th\b \fap b\b\ft, it is n\bc\bssary to
s\bcur\b th\b shou\fd\br b\b\ft in p\fac\b with a \focking
Safety — seats, seat belts and supplemental restraint system1-21
& R Q G L W L R Q
Page 44 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
1-22Safety — seats, seat belts and supplemental restraint system
clip*A. Use the locking clip attached to the child
\fest\faint system o\f one which is e\buivalent in
dimension and st\fength.
Be su\fe to follow the child \fest\faint system
manufactu\fe\f’s inst\fuctions fo\f belt \fouting.
3. Test the child \fest\faint system befo\fe you place the child in it. Tilt it f\fom side to side. T\fy to tug it
fo\fwa\fd and check if it is held secu\fely in place.
4. Make su\fe that the child \fest\faint system is p\fope\fly secu\fed p\fio\f to each use.
Installation on \fea\f cente\f seat (2-point type
seat belt) - seat belts without automatic
locking mode
WARNING:
.The rear center two-point type seat belt on
your vehicle is not equipped with an auto-
matic locking mode retractor.
. The direction of the child restraint system
depends on the type of the child restraint
system and the size of the child. Front-facing:
SSS0512
If you must install a f\font-facing child \fest\faint system
on the \fea\f cente\f seat, follow these steps:
1. Position the f\font-facing child \fest\faint system on
the \fea\f cente\f seat.
Always follow the child \fest\faint system manufac-
tu\fe\f’s inst\fuctions fo\f installation and use.
2. Route the seat belt tongue th\fough the child \fest\faint system and inse\ft it into the buckle until
you hea\f and feel the latch engage.
SSS0513Locking clip
3. To p\fevent slack in the lap belt, it is necessa\fy tosecu\fe the lap belt in place with a locking clip*A.
Use the locking clip attached to the child \fest\faint
system, o\f one which is e\buivalent in dimensions
and st\fength.
Be su\fe to follow the child \fest\faint system
manufactu\fe\f’s inst\fuctions fo\f belt \fouting.
4. Test the child \fest\faint system befo\fe you place the child in it. Tilt it f\fom side to side. T\fy to tug it
fo\fwa\fd and check if it is held secu\fely in place.
5. Make su\fe that the child \fest\faint system is p\fope\fly secu\fed p\fio\f to each use.
Rear-facing:
SSS0514
If you must install a \fea\f-facing child \fest\faint system
on the \fea\f cente\f seat, follow these steps:
1. Position the \fea\f-facing child \fest\faint system on the \fea\f cente\f seat.
Always follow the child \fest\faint system manufac-
tu\fe\f’s inst\fuctions fo\f installation and use.
2. Route the seat belt tongue th\fough the child \fest\faint system and inse\ft it into the buckle until
you hea\f and feel the latch engage.
& R Q G L W L R Q
Page 45 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
SSS0513Locking clip3. To prevent slack \fn the lap belt, \ft \fs necessar\b tosecure the lap belt \fn place w\fth a lock\fng cl\fp*A.
Use the lock\fng cl\fp attached to the ch\fld restra\fnt
s\bstem, or one wh\fch \fs equ\fvalent \fn d\fmens\fons
and strength.
Be sure to follow the ch\fld restra\fnt s\bstem
manufacturer’s \fnstruct\fons for belt rout\fng.
4. Test the ch\fld restra\fnt s\bstem before \bou place the ch\fld \fn \ft. T\flt \ft from s\fde to s\fde. Tr\b to tug \ft
forward and check \ff \ft \fs held securel\b \fn place.
5. Make sure that the ch\fld restra\fnt s\bstem \fs properl\b secured pr\for to each use.
Installat\fon on front seat - seat belts w\fthout automat\fc lock\fng mode
SSS0300A
WARNING:
.Never install a rear-facing child restraint on
the front passenger’s seat when the front
passenger’s air bag is equipped. Supple-
mental front-impact air bags inflate with
great force. A rear-facing child restraint
could be struck by the supplemental front-
impact air bags in an accident and could
seriously injure or kill your child.
. Never install a child restraint system with a
top tether strap on the front seat.
. RENAULT recommends that a child restraint
system be installed on the rear seat. How-
ever, if you must install a front-facing child
restraint system on the front passenger’s
seat, move the passenger’ s seat to the
rearmost position.
. Child restraints for infants must be used in
the rear-facing direction and therefore must
not be used on the front passenger’s seat
when the front passenger’ s air bag isequipped.
Front-facing:
SSS0627
If \bou must \fnstall a front-fac\fng ch\fld restra\fnt s\bstem
on the front seat, follow these steps:
1. Turn off the front passenger’s a\fr bag us\fng the front passenger a\fr bag sw\ftch. (See “Supple-
mental a\fr bag s\bstems” (P.1-29) .) Place the
\fgn\ft\fon sw\ftch \fn the “ON” pos\ft\fon and make
sure that the front a\fr bag status l\fght
on the
\fnstrument panel \fllum\fnates (\ff equ\fpped) .
Safety — seats, seat belts and supplemental restraint system1-23
& R Q G L W L R Q
Page 46 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
1-24Safety — seats, seat belts and supplemental restraint system
2. Move the seat to the rearmost position*1.
3. \fdjust the head restraint to its hi\bhest position
*2.
4. Position the front-facin\b child restraint system on the front passen\ber’s seat. It should be placed in
the front-facin\b direction only.
\flways follow the child restraint system manufac-
turer’s instructions for installation and use.
SSS0515
5. Route the seat belt ton\bue throu\bh the childrestraint system and insert it into the buckle until
you hear and feel the latch en\ba\be.
SSS0513Locking clip
6. To prevent slack in the lap belt, it is necessary tosecure the shoulder belt in place with a lockin\b
clip
*A. Use the lockin\b clip attached to the child
restraint system, or one which is equivalent in
dimensions and stren\bth.
Be sure to follow the child restraint system
manufacturer’s instructions for belt routin\b.
7. Slide the seat forward so that the seat belt fully ti\bhtens the child restraint system.
8. Test the child restraint system before you place the child in it. Tilt it from side to side. Try to tu\b it
forward and check if it is held securely in place.
9. Make sure that the child restraint system is properly secured prior to each use.
& R Q G L W L R Q
Page 54 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
1-32Safety — seats, seat belts and supplemental restraint system
REPAIR AND REPLACEMENT PROCE-
DURE
WARNING:
.Once the air bags have been inflated, the air
bag modules will not function and must be
replaced. The air bag modules must be
replaced by a RENAULT dealer. The inflated
air bag modules cannot be repaired.
. The air bag systems should be inspected by
a RENAULT dealer if there is any damage to
the front end or side portion of the vehicle.
. If you need to dispose of the SRS or scrap
the vehicle, contact a RENAULT dealer.
Correct disposal procedures are set forth in
the appropriate RENAULT Service Manual.
Incorrect disposal procedures could cause
personal injury.
The \fir b\f\bs \fre desi\bned to \fctiv\fte on \f one-time-
only b\fsis. As \f reminder, unless the SRS \fir b\f\b
w\frnin\b li\bht is d\fm\f\bed, the SRS \fir b\f\b w\frnin\b
li\bht rem\fins illumin\fted \ffter infl\ftion h\fs occurred.
The rep\fir \fnd repl\fcement of the SRS should be
done only by \f RENAULT de\fler.
When m\finten\fnce work is required on the vehicle,
inform\ftion \fbout the \fir b\f\bs \fnd rel\fted p\frts should
be pointed out to the person performin\b the m\fin-
ten\fnce. The i\bnition switch should \flw\fys be in the
“LOCK” position when workin\b under the hood or
inside the vehicle.
& R Q G L W L R Q
Page 56 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-2Instruments and controls
LEFT-HAND DRIVE (LHD) MODEL
JVC\f223X
1\b Vehicle Dynamic Control (VDC) OFF switch* orElectronic Stability Program (ESP) OFF switch*
2\b Parking space measurement switch*
3\b Headlight, fog light* and turn signal switch
4\b Steering-wheel-mou\Cnted controls (left side)* — Audio control*
— Bluetooth
ŠHands-Free Phone System con-
trol (without navigation system)* — Bluetooth
ŠHands-Free Phone System con-
trol (with navigation system)**
5\b Driver’s front-impact air bag/Horn
6\b Meters and gauges
7\b Steering-wheel-mou\Cnted controls (right side)* — Cruise control switches*
— Speed limiter switches*
8\b Wiper and washer switch 9\b Center ventilator
1\f\b Rear window defogger switch*
11\b Hazard indicator flasher switch*
12\b Heater and air conditioner* control
13\b Audio system* or Navigation system**
14\b Passenger’s front-impact air bag*
15\b Upper instrument box*
16\b Side ventilator
17\b Headlight aiming control switch*
18\b Outside rearview mirror control switch*
19\b Fuel filler lid release handle
2\f\b Hood lock release handle
21\b Stop/Start System OFF switch*
22\b Tilting steering wheel lock lever*
23\b Ignition switch (model without Intelligent Key
system)/steering lock
24\b Push-button ignition switch (model with Intelli- gent Key system)
25\b Cup holder
26\b Selector lever or Shift lever — Automatic Transmission (AT) model
— Continuously Variable Transmission (CVT)
model
— Manual Transmission (MT) model
27\b Power outlet*/USB/AUX connector*
28\b Glove box
*: if equipped
**: Refer to the separate Navigation Owner’s Manual (if
equipped) \b
INSTRUMENT PANEL
& R Q G L W L R Q