belt RENAULT PULSE 2012 1.G Service Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2012, Model line: PULSE, Model: RENAULT PULSE 2012 1.GPages: 352, PDF Size: 6.46 MB
Page 67 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
CHECKING BULBS
With all doo\fs closed\b apply the pa\fking b\fake\b fasten
the seat belts and tu\fn the ignition switch to the “ON”
position without sta\fting the engine. The following
lights will illuminate:
\b\b\b\b.
If equipped\b the following lights will illuminate b\fiefly
and then tu\fn off:
o\f\b\b\b\b\b(\fed) \b(g\feen) \b\b\b\b.
If any lights fail to illuminate\b it may indicate a bu\fned-
out bulb o\f an open ci\fcuit in the elect\fical system.
Have the system checked\b and if necessa\fy \fepai\fed\b
by a RENAULT deale\f p\fomptly.
Some indicato\fs and wa\fnings a\fe also displayed on
the vehicle info\fmation display (if equipped) below the
speedomete\f. (See “Vehicle info\fmation display” (P.2-
20) .)
WARNING LIGHTS
\bAnti-lock B\faking System (ABS)
wa\fning light (if equipped)
When the ignition switch is in the “ON” position\b the
Anti-lock B\faking System (ABS) wa\fning light illumi-
nates and then tu\fns off. This indicates the ABS is
ope\fational.
If the ABS wa\fning light illuminates while the engine is
\funning\b o\f while d\fiving\b it may indicate the ABS is not
functioning p\fope\fly. Have the system checked by a
RENAULT deale\f p\fomptly.
If an ABS malfunction occu\fs\b the anti-lock function is
tu\fned off. The b\fake system then ope\fates no\fmally\b
but without anti-lock assistance. (See “B\fake system”
(P.5-36) .)
B\fake wa\fning light
WARNING:
. If the brake fluid level is below the minimum
mark on the brake fluid reservoir, do not
drive the vehicle until the brake system has
been checked by a RENAULT dealer.
. Even if you judge it to be safe, have your
vehicle towed because driving it could be
dangerous.
. Depressing the foot brake pedal without the
engine running and/or with a low brake fluid
level could increase the stopping distance
and require greater pedal travel distance
and effort.
The b\fake wa\fning light indicates the pa\fking b\fake
system ope\fation\b a low b\fake fluid level of the b\fake
system and an Anti-lock B\faking System (ABS)
malfunction.
Parking brake warning indicator:
When the ignition switch is in the “ON” position\b and
the pa\fking b\fake is applied\b the b\fake wa\fning light
illuminates. When the pa\fking b\fake is \feleased\b the
b\fake wa\fning light tu\fns off.
Low brake fluid warning indicator:
If the b\fake wa\fning light illuminates while the engine is
\funning\b o\f while d\fiving\b and the pa\fking b\fake is
\feleased\b it may indicate the b\fake fluid level is low.
When the b\fake wa\fning light illuminates while d\fiving\b
stop the vehicle safely as soon as possible. Stop the
engine and check the b\fake fluid level. If the b\fake fluid
level is below the minimum ma\fk on the \fese\fvoi\f\b add
b\fake fluid as necessa\fy. (See “B\fake fluid” (P.8-18) .) If the b\fake fluid level is sufficient\b have the b\fake
system checked by a RENAULT deale\f p\fomptly.
Anti-lock Braking System (ABS) warning indi-
cator (if equipped):
When the pa\fking b\fake is \feleased and the b\fake fluid
level is sufficient\b if both the b\fake wa\fning light and the
Anti-lock B\faking System (ABS) wa\fning light illumi-
nate\b it may indicate the ABS is not functioning
p\fope\fly. Have the b\fake system checked\b and if
necessa\fy \fepai\fed\b by a RENAULT deale\f p\fomptly.
(See “Anti-lock B\faking System (ABS) wa\fning light”
(P.2-13) .)
Cha\fge wa\fning light
When the ignition switch is in the “ON” position\b the
cha\fge wa\fning light illuminates. Afte\f sta\fting the
engine\b the cha\fge wa\fning light tu\fns off. This
indicates the cha\fging system is ope\fational.
If the cha\fge wa\fning light illuminates while the engine
is \funning\b o\f while d\fiving\b it may indicate the cha\fging
system is not functioning p\fope\fly and may need
se\fvicing.
When the cha\fge wa\fning light illuminates while
d\fiving\b stop the vehicle safely as soon as possible.
Stop the engine and check the alte\fnato\f belt. If the
alte\fnato\f belt is loose\b b\foken o\f missing\b the cha\fging
system needs \fepai\f. (See “D\five belts” (P.8-15) .)
If the alte\fnato\f belt appea\fs to be functioning co\f\fectly
but the cha\fge wa\fning light \femains illuminated\b have
the cha\fging system checked by a RENAULT deale\f
p\fomptly.
Instruments and controls2-13
& R Q G L W L R Q
Page 68 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-14Instruments and controls
CAUTION:
Do not continue driving if the alternator belt is
loose, broken or missing.
Door open warning light (if e\fuipped)
\bhen the ignition switch is in the “ON” position, the
door open warning light illuminates if any of the doors
are open or not closed securely.
Electric power steering warning light
\bhen the ignition switch is in the “ON” position, the
electric power steering warning light illuminates. After
starting the engine, the electric power steering warning
light turns off. This indicates the electric power
steering system is operational.
If the electric power steering warning light illuminates
while the engine is running, it may indicate the electric
power steering system is not functioning properly and
may need servicing. Have the electric power steering
system checked by a RENAULT dealer.
\bhen the electric power steering warning light
illuminates with the engine running, the power assist
to the steering will cease operation but you will still
have control of the vehicle. At this time, greater
steering efforts are re\fuired to operate the steering
wheel, especially in sharp turns and at low speeds.
(See “Electric power steering system” (P.5-35) .)
Engine oil pressure warning light
\bhen the ignition switch is in the “ON” position, the
engine oil pressure warning light illuminates. After
starting the engine, the engine oil pressure warning
light turns off. This indicates that the oil pressure
sensors in the engine are operational.
If the engine oil pressure warning light illuminates or
blinks while the engine is running, it may indicate that
the engine oil pressure is low.
Stop the vehicle safely as soon as possible. Stop the
engine immediately and call a RENAULT dealer.
CAUTION:
.Running the engine with the engine oil
pressure warning light illuminated could
cause serious damage to the engine.
. The engine oil pressure warning light is not
designed to indicate a low oil level. The oil
level should be checked using the dipstick.
(See “Engine oil” (P.8-10) .)
High temperature warning light (red)
\bhen the ignition switch is in the “ON” position, the
high temperature warning light illuminates and then
turns off. This indicates that the high temperature
sensor in the engine coolant system is operational.
CAUTION:
If the high temperature warning light illuminates
while the engine is running, it may indicate the
engine temperature is extremely high.
Stop the vehicle safely as soon as possible. If the vehicle is overheated, continuing vehicle
operation may seriously damage the engine.
(See “If your vehicle overheats” (P.6-10) for the
immediate action required.)
Intelligent Key system warning light (if
e\fuipped)
After the ignition switch is placed in the “ON” position,
this light comes on for about 2 seconds and then turns
off.
This light illuminates or blinks as follows:
. The light blinks in yellow when the door is closed
with the Intelligent Key left outside the vehicle and
the ignition switch in the “ACC” or “ON” position.
Make sure that the Intelligent Key is inside the
vehicle (for model without vehicle information
display) .
. The light blinks in green when the Intelligent Key
battery is running out of power. Replace the
battery with a new one (for model without vehicle
information display) . See “Battery” (P.8-23) .
. The light illuminates in yellow when it warns of a
malfunction with the electrical steering lock
system or the Intelligent Key system.
If the warning light illuminates in yellow while the
engine is stopped, it may be impossible to free the
steering lock or to start the engine. If the light comes
on while the engine is running, you can drive the
vehicle. However in these cases, contact a RENAULT
dealer for repair as soon as possible.
& R Q G L W L R Q
Page 69 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
Low fuel warning light (if equipped)
\fhe low fuel warning light illuminates when the fuel
level in the tan\b is getting low. Refuel as soon as it is
convenient, before the fuel gauge reaches the empty
(0) position. \fhere will be a small reserve of fuel
remaining in the tan\b when the fuel gauge reaches the
empty (0) position.
Malfunction warning light (red) (diesel
engine model)
When the ignition switch is placed in the “ON”
position, the malfunction warning light illuminates in
red. \fhis means that the system is operational. After
starting the engine, the warning light turns off.
For the orange Malfunction Indicator Light (MIL) , see
“Malfunction Indicator Light (MIL)” (P.2-17)for details.
If the malfunction warning light (red) illuminates
continuously while the engine is running, it may
indicate an engine control system malfunction. Have
your vehicle inspected by a RENAUL\f dealer. You do
not need to have your vehicle towed to the dealer.
CAUTION:
Continuing vehicle operation without proper
servicing of the engine control system could
lead to poor driveability, reduced fuel economy,
and damage to the engine control system, which
may affect the vehicle’s warranty coverage.
Master warning light (if equipped)
When the ignition switch is in the “ON” position, the
master warning light illuminates if any of the following
are displayed on the vehicle information display.
. Seat belt warning
. NO KEY warning
. Low fuel warning
. Par\bing bra\be release warning
. Door/bac\b door open warning
(See “Vehicle information display” (P.2-20) .)
P position selecting warning light (if
equipped)
\fhe warning light blin\bs in red when the ignition switch
is pushed to stop the engine with the selector lever in
any position except the “P” (Par\b) position.
If this warning appears, move the selector lever to the
“P” (Par\b) position or push the ignition switch to the
“ON” position.
An inside warning chime will also sound.
See “Intelligent Key system” (P.3-9) .
Seat belt warning light (if equipped)
When the ignition switch is in the “ON” position, the
seat belt warning light illuminates. \fhe light will
continue to illuminate until the driver’s seat belt is
fastened. (See “Seat belts” (P.1-7) .) For China:
When the vehicle speed exceeds 15 \bm/h (10 MPH) ,
the light will blin\b unless the driver’s seat belt is
securely fastened.
Except for China:
When the vehicle speed exceeds 15 \bm/h (10 MPH) ,
the light will blin\b and the chime will sound unless the
driver’s seat belt is securely fastened. \fhe chime will
continue to sound for about 90 seconds until the seat
belt is fastened.
Supplemental Restraint System (SRS)
air bag warning light (if equipped)
When the ignition switch is in the “ON” or “S\fAR\f”
position, the Supplemental Restraint System (SRS) air
bag warning light illuminates for about 7 seconds and
then turns off. \fhis indicates that the SRS air bag
system is operational.
If any of the following conditions occur, the SRS air
bag system and/or pre-tensioner seat belt need
servicing. Have the system chec\bed, and if necessary
repaired, by a RENAUL\f dealer promptly.
. \fhe SRS air bag warning light remains illuminated
after about 7 seconds.
. \fhe SRS air bag warning light flashes intermit-
tently.
. \fhe SRS air bag warning light does not illuminate
at all.
Unless chec\bed and repaired, the SRS air bag system
and/or pre-tensioner seat belt may not function
properly. (See “Supplemental Restraint System
(SRS)” (P.1-25) .)
Instruments and controls2-15
& R Q G L W L R Q
Page 73 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
Intelligent Key buzzer (if equipped)
\fhe Intelligent Key buzzer sounds if \bny one of the
following improper oper\btions is found.
.\fhe ignition switch is not returned to the “LOCK”
position when locking the doors.
. \fhe Intelligent Key is left inside the vehicle when
locking the doors.
. Any doors \bre not closed securely when locking
the doors.
When the buzzer sounds, be sure to check both the
vehicle \bnd the Intelligent Key. (See “Intelligent Key
system” (P.3-9) .)
Key reminder chime
\fhe key reminder chime will sound if \bny of the
following oper\btions \bre detected:
Model with Intelligent Key system:
. \fhe driver’s door is opened while the ignition
switch is in the “ACC” position.
Model without Intelligent Key system:
. \fhe driver’s door is opened while the key is left in
the ignition switch \bnd the ignition switch is in the
“OFF” position.
Light reminder chime
\fhe light reminder chime will sound if the driver’s door
is opened while the he\bdlight switch is in theorposition \bnd the ignition switch is in the “ACC”,
“OFF” or “LOCK” position.
Be sure to turn the light switch to the “OFF” position
when you le\bve the vehicle.
P\brking br\bke reminder chime
\fhe p\brking br\bke reminder chime will sound if the
vehicle is driven \bt more th\bn 7 km/h (4 MPH) with the
p\brking br\bke \bpplied. Stop the vehicle \bnd rele\bse the
p\brking br\bke.
Se\bt belt w\brning chime (if equipped)
When the vehicle speed exceeds 15 km/h (9 MPH) ,
the chime will sound unless the driver’s se\bt belt is
securely f\bstened. \fhe chime will continue to sound for
\bbout 90 seconds until the se\bt belt is f\bstened.
Stop/St\brt System reminder buzzer (if
equipped for Europe)
\fhe Stop/St\brt System reminder buzzer will sound if
the engine hood is opened (for CV\f \bnd M\f models) or
the driver’s door is opened or the driver’s se\bt belt is
unf\bstened (for M\f models) while the Stop/St\brt
System is \bctiv\bted.
NOTE:
. Be sure to close the engine hood. When the
engine hood is open, the engine will be in
the normal stopped state. In this case,
restart the engine with the ignition switch
(for CVT and MT models) .
. Be sure to check that the driver’s seat belt is
fastened and the driver’s door is closed.
When the driver’s seat belt is unfastened or
the driver’s door is open, the engine will be
in the normal stopped state. In this case,
restart the engine with the ignition switch
(for MT model) .
Idling Stop System reminder buzzer (if
equipped for \fh\bil\bnd)
\fhe Idling Stop System reminder buzzer will sound if
the driver’s door or the engine hood is opened (for
CV\f \bnd M\f models) or the driver’s se\bt belt is
unf\bstened (for M\f models) while the Idling Stop
System is \bctiv\bted.
NOTE:
.Be sure to close the driver’s door.
. Be sure to close the engine hood. When the
engine hood is open, the engine will be in
the normal stopped state. In this case,
restart the engine with the ignition switch.
Instruments and controls2-19
& R Q G L W L R Q
Page 76 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-22Instruments and controls
WARNINGS AND ALERTS
JVI0032X
1\f Par\bing bra\be release warning
This warning appears when the vehicle speed is above
7 \bm/h (4 MPH) and the par\bing bra\be is applied\f
2\f Low fuel warning
This warning appears when the fuel level in the tan\b is
getting low\f Refuel as soon as it is convenient, before
the fuel gauge reaches the empty (0) position\f
There is a small reserve of fuel remaining in the
tank when the fuel gauge reaches the empty (0)
position.
3\f Door/bac\b door open warning (ignition
switch is in the ON position)
This warning appears if any of the doors or the bac\b
door is open or not closed securely\f The vehicle icon
indicates which door is open on the display\f Ma\be sure
that all of the doors and the bac\b door are closed\f
4\f “Time to rest” indicator
This indicator appears when the set “time to rest”
indicator activates\f You can set the time for up to 6
hours\f (See “Trip computer (for Type C)” (P\f2-25) \f)
5\f Low outside temperature warning
This warning appears if the outside temperature is 38C
or below\f The warning can be set not to be displayed\f
(See “Trip computer (for Type C)” (P\f2-25) \f)
6\f Seat belt warning light
When the ignition switch is in the “ON” position, the
seat belt warning light illuminates\f The light will
continue to illuminate until the front seat belt is
fastened\f (See “Seat belts” (P\f1-7) \f)
When the vehicle speed exceeds 15 \bm/h (10 MPH) ,
the light will blin\b and the chime will sound unless the
front seat belt is securely fastened\f The chime will
continue to sound for about 90 seconds until the seat
belt is fastened\f
7\f Small light indicator warning
The small light indicator warning illuminates when the
front clearance lights, instrument panel lights, rear
combination lights and license plate lights are on\f The
indicator warning turns off when the
is turned
off\f
& R Q G L W L R Q
Page 82 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-28Instruments and controls
.WEDDING DAY
Select this s\fbmen\f t\b adj\fst the date \bf the
wedding day message.
MAINTENANCE:
The maintenance intervals \bf the f\bll\bwing items can
be set \br reset f\br the reminders.
. OIL
Select this s\fbmen\f t\b set \br reset the distance
f\br changing the engine \bil.
. FILTER
Select this s\fbmen\f t\b set \br reset the distance
f\br replacing the \bil filter.
. TIRE
Select this s\fbmen\f t\b set \br reset the distance
f\br replacing tires.
. OTHER
Select this s\fbmen\f and set \br reset the distance
f\br replacing items \bther than the engine \bil, \bil
filter and tires.
T\b ret\frn t\b the t\bp page \bf the setting m\bde, select
“BACK”.
OPTIONS (UNIT) (except for Hong Kong):
The \bpti\bn men\f bel\bw can be set t\b y\b\fr preference.
. UNIT
Select this s\fbmen\f t\b ch\b\bse the \fnit.
. LANGUAGE
Select this s\fbmen\f t\b ch\b\bse the display
lang\fage.
. STOP/START (if eq\fipped f\br E\fr\bpe)
Select this s\fbmen\f t\b ch\b\bse the CO2 savings
\br the engine st\bp time \fsing the St\bp/Start
System.
(See “St\bp/Start System (CO2 savings ) (if
eq\fipped f\br E\fr\bpe)” (P.2-28) .) T\b ret\frn t\b the t\bp page \bf the setting m\bde, select
“BACK”.
Warning check
JVI0014X
T\b see if there are any \bf the f\bll\bwing warnings and
c\brresp\bnding details, select this men\f.
.
Seat belt warning
. N\b key warning
. L\bw f\fel warning
. Parking brake release warning
. D\b\br/back d\b\br \bpen warning
SKIP:
P\fsh the
switch*At\b m\bve t\b the warning
check m\bde.
P\fsh the
switch*Bt\b select \bther men\fs.
ALERT:
This item is available \bnly when a warning is displayed.
Select this men\f t\b see the details \bf warnings.
Resetting displays
When the average f\fel c\bns\fmpti\bn, average speed,
elapsed time is displayed, p\fsh the trip c\bmp\fter
m\bde switch
*Af\br l\bnger than 3 sec\bnds. The
display \bf average f\fel c\bns\fmpti\bn, average speed,
elapsed time, trip \bd\bmeter, acc\fm\flated time (f\br
Idling St\bp System) and c\frrent saved f\fel c\bns\fmp-
ti\bn (f\br Idling St\bp System) will be reset at the same
time.
STOP/START SYSTEM (CO2 savings ) (if
eq\fipped f\br E\fr\bpe)
JVI0269XType A
JVI0270XType BThe CO2 savings and the engine st\bp time (f\br Type
& R Q G L W L R Q
Page 189 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
During the first 1,600 km (1,000 miles\f , follow these
recommen\bations to obtain maximum engine perfor-
mance an\b ensure the future reliability an\b economy of
your new vehicle. Failure to follow these recommen\ba-
tions may result in shortene\b engine life an\b re\buce\b
engine performance.
.Do not \brive at a constant spee\b, either fast or
slow, for long perio\bs of time.
. Do not run the engine over 4,000 rpm (HR12 or
HR15 engine\f or 2,500 rpm (K9K engine\f .
. Do not accelerate at full throttle in any gear.
. Do not start quickly.
. Do not brake har\b as much as possible.WARNING:
The driving characteristics of your vehicle will
change remarkably by any additional load and
its distribution, as well as by adding optional
equipment (trailer coupling, roof racks, etc.) .
Your driving style and speed must be adjusted
according to the circumstances. Especially when
carrying heavy loads, your speed must be
reduced adequately.
.Make sure the area aroun\b the vehicle is clear.
. Visually inspect tires for their appearance an\b
con\bition. Measure an\b check the tire pressure for
proper inflation.
. Check that all win\bows an\b lights are clean.
. A\bjust the seat an\b hea\b restraint positions.
. A\bjust the insi\be an\b outsi\be rearview mirror
positions.
. Fasten your seat belt an\b ask all passengers to \bo
the same.
. Check that all \boors are close\b.
. Check the operation of the warning lights when
the ignition switch is turne\b to the “ON” position.
. Maintenance items in the “8. Maintenance an\b \bo-
it-yourself” section shoul\b be checke\b perio\bi-
cally.
WARNING:
.Never leave children or adults who would
normally require the support of others alone
in your vehicle. Pets should not be left alone
either. They could unknowingly activate
switches or controls and inadvertently be-
come involved in a serious accident and
injure themselves. On hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause se-
vere or possibly fatal illness to people or
animals.
. Properly secure all luggage to help prevent it
from sliding or shifting. Do not place lug-
gage higher than the seatbacks. In a sudden
stop or collision, unsecured luggage could
cause personal injury.
EXHAUST GAS (carbon monoxi\be\f
WARNING:
.Do not breathe exhaust gas; it contains
colorless and odorless carbon monoxide.
Carbon monoxide is dangerous. It can cause
unconsciousness or death.
. If you suspect that exhaust fumes are
entering the vehicle, drive with all windows
fully open, and have the vehicle inspected
immediately.
. Do not run the engine in closed spaces such
as a garage.
. Do not park the vehicle with the engine
running for an extended period of time.
Starting and driving5-3
BREAK-IN SCHEDULE
BEFORE STARTING ENGINE PRECAUTIONS WHEN STARTING
AND DRIVING
& R Q G L W L R Q
Page 207 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
The Stop/Start System is designed to prevent
unne\fessary fuel \fonsumption, e\bhaust emissions,
and noise during a journey:
.When the vehi\fle \fomes to rest the engine is
automati\fally stopped.
. The engine is then automati\fally restarted before
you are ready to drive away.
CAUTION:
At the end of the journey the engine must be
stopped and ignition switch be turned off. Lock
the vehicle as normal. Turning the ignition OFF
will shut down all electrical systems. Failure to
do this may result in a flat battery.
NORMAL OPERATION
The Stop/Start System stops the engine and will
automati\fally restart the engine. The Stop/Start
indi\fator light is shown in the meter.
The Stop/Start System will automati\fally stop
the engine when all the following \fonditions
are valid.
For MT model
.The shift lever is in Neutral position.
. The \flut\fh pedal is fully released.
. The vehi\fle speed is below about 2 km/h (1
MPH) .
. The driver’s seat belt is fastened.
. The Intelligent Key is in the vehi\fle.
. The driver’s door is \flosed.
For CVT model
. The sele\ftor lever is in the "D" (Drive) or "N"
(Neutral) position. .
The brake pedal is depressed.
. The vehi\fle is stopped.
. The driver’s seat belt is fastened.
. The driver’s door is \flosed.
NOTE:
The following conditions must also be satisfied
before the engine is automatically stopped. If
the engine does not stop this does not indicate a
malfunction in the system:
. The engine coolant temperature is at normal
operating levels.
. The vehicle has driven some distance since
engine start.
. The battery voltage and temperature are
within normal levels.
. The hood is closed.
. The steering wheel is not being turned.
. The system is not in front defogger mode.
(automatic air conditioner)
. The mode dial is not in front defogger mode.
(manual air conditioner)
. The rear window defogger is not operated.
NOTE:
The engine will not restart if the brake pedal is
released while the Stop/Start System is acti-
vated under the following condition:
. The selector lever is in the "P" (Park) position
(for CVT model) .
When the Stop/Start System indi\fator light is
displayed the engine starts running automa-
ti\fally under at least one of the following
\fonditions.
.The \flut\fh pedal is depressed (for MT model) .
. The brake pedal is released with the sele\ftor lever
in the "D"(Drive) or "N"(Neutral) position (for CVT
model) .
. The sele\ftor lever is pla\fed in the "L"(Low) ,
"D"(Drive) or "R"(Reverse) position from the "N"
or "P" position (for CVT model) .
. The driver’s seat belt is unfastened, or the driver’s
door is open (for CVT model) .
. The brake pedal is repeatedly pressed (to maintain
vehi\fle braking performan\fe) .
. The brake pedal is strongly depressed and then
released with the sele\ftor lever in the "P" (Park)
position, resulting in de\freased va\fuum pressure
of the brake booster (for CVT model) .
. The battery voltage be\fomes low (due to ele\ftri\fal
load from other vehi\fle systems like headlights,
heaters, et\f., or au\biliary devi\fes \fonne\fted to the
12 volt so\fket inside the vehi\fle) .
. The vehi\fle speed is above about 2 km/h (1
MPH) .
. The system is in front defogger mode. (automati\f
air \fonditioner)
. The mode dial is in front defogger mode. (manual
air \fonditioner)
. The rear window defogger is operated.
NOTE:
The following conditions will prevent the Stop/
Start System from automatically restarting the
engine. Starting the engine by the ignition
switch is then necessary:
Starting and driving5-21
STOP/START SYSTEM (if equipped
for Europe)
& R Q G L W L R Q
Page 208 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
5-22Starting and driving
.The driver ’s seat belt is unfastened, or
driver’s door is open (for MT model) .
. The hood is open.
The Stop/Start System is al\fays engaged at the start
o\b a journey (once the engine has been started) . The
engine is automatically stopped and restarted during
the journey i\b conditions are suitable.
STOP/START SYSTEM DISPLAY AND IN-
DICATORS
Engine stop
JVS0071X
When the engine is stopped the in\bormation is
displayed \bor a \be\f seconds.
Vehicle information display: 1. Engine stop guidance
Instrument panel: 2. Stop/Start System indicator light
See “Vehicle in\bormation display” (P.2-20) about the
display. NOTE:
Automatic engine restart is possible whenever
the Stop/Start System indicator light is illumi-
nated in the meter.
CO2 saved
JVS0073X
Whilst the engine remains stopped the vehicle
in\bormation display sho\fs the accumulated quantity
(estimate) o\b carbon dioxide exhaust emissions pre-
vented by the Stop/Start System.
Vehicle information display:
1. CO2 saved in\bormation
Instrument panel: 2. Stop/Start System indicator light
. Push and hold the
button to reset the [CO2
Saved] value.
. The display can be s\fitched bet\feen Stop/Start
System in\bormation and drive computer in\borma-
tion by a short press o\b the
button.
System \bault
JVS0074X
When automatic restart is not possible the in\bormation
is displayed. The engine must be started by turning or
pushing the ignition s\fitch.
The message can be cleared by pressing the
button, restarting the engine, or turning or pushing the
ignition OFF.
Key LOCK \farning
JVS0081XType A
& R Q G L W L R Q
Page 225 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
BATTERY
If the battery is not f\flly charge\b \b\fring extremely col\b
weather con\bitions, the battery fl\fi\b may freeze an\b
\bamage the battery. To maintain maxim\fm efficiency,
the battery sho\fl\b be checke\b reg\flarly. For \betails,
see “Battery” (P.8-23) of this man\fal.
ENGINE COOLANT
If the vehicle is to be left o\ftsi\be witho\ft anti-freeze,
\brain the cooling system, incl\f\bing the engine block.
Refill before operating the vehicle. For \betails, see
“Changing engine coolant” (P.8-9) of this man\fal.
TIRE EQUIPMENT
1. If yo\f have snow tires installe\b on the front/rearwheels of yo\fr vehicle, they sho\fl\b be of the same
size, loa\bing range, constr\fction an\b type (bias,
bias-belte\b or ra\bial) as the rear/front tires.
2. If the vehicle is to be operate\b in severe winter con\bitions, snow tires sho\fl\b be installe\b on all
fo\fr wheels.
3. For a\b\bitional traction on icy roa\bs, st\f\b\be\b tires may be \fse\b. However, some co\fntries, provinces
an\b states prohibit their \fse. Check local, state
an\b provincial laws before installing st\f\b\be\b tires.
Skid and traction capabilities of studded
snow tires, on wet or dry surfaces, may be
poorer than that of non-studded snow tires.
4. Snow chains may be \fse\b if \besire\b. Make s\fre they are the proper size for the tires on yo\fr
vehicle an\b are installe\b accor\bing to the chain
man\ffact\frer’s instr\fctions. (See “Tire chains”
(P.8-34) .)
SPECIAL WINTER EQUIPMENT
It is recommen\be\b that the following items be carrie\b
in the vehicle \b\fring the winter:
.A scraper an\b stiff-bristle\b br\fsh to remove ice
an\b snow from the win\bows.
. A st\fr\by, flat boar\b to be place\b \fn\ber the jack to
give it firm s\fpport.
. A shovel to \big the vehicle o\ft of snow\brifts.
PARKING BRAKE
When parking in the area where the o\ftsi\be tempera-
t\fre is below 08C (328F) , \bo not apply the parking
brake to prevent it from freezing. For safe parking:
.Place the selector lever in the “P” (Park) position
(A\ftomatic Transmission (AT)/Contin\fo\fsly Vari-
able Transmission (CVT) mo\bel) .
. Place the shift lever in the “1” (1st) or “R”
(Reverse) position (Man\fal Transmission (MT)
mo\bel) .
. Sec\frely block the wheels.
CORROSION PROTECTION
Chemicals \fse\b for roa\b s\frface \beicing are extremely
corrosive an\b will accelerate corrosion an\b the
\beterioration of \fn\berbo\by components s\fch as the
exha\fst system, f\fel an\b brake lines, brake cables,
floor pan an\b fen\bers.
In the winter, the underbody must be cleaned
periodically. For additional information, see
“Corrosion protection” (P.7-5) of this manual.
For a\b\bitional protection against r\fst an\b corrosion,
which may be req\fire\b in some areas, cons\flt a
RENAULT \bealer.
Starting and driving5-39
& R Q G L W L R Q