technical specifications RENAULT SCENIC 2008 J84 / 2.G Electrical Equipment -Battery Workshop Manual

8Electrical equipment
V4 MR-372-J84-80A000$TOC.mif
V4
80A
"The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from
which his vehicles are constructed."
V4
All rights reserved by Renault s.a.s.
Edition Anglaise
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of
Renault s.a.s.
© Renault s.a.s. 2008
BATTERY
Battery – Initialisation 80A - 2
Battery – Specifications 80A - 3
Battery – Advice 80A - 4
Battery – Check 80A - 5
Battery – Test 80A - 7

80A-9V4 MR-372-J84-80A000$050.mif
BATTERY
Battery – Test80A
TEST1
CONTINUED
Was the test carried out with the
battery disconnected?Disconnect both terminals of
the battery.
Always replace the battery with one that has the same
electrical and dimensional specifications
(see MR 370, Mechanical, 80A, Battery, Battery:
Removal – Refitting).
Start the vehicle again.
Does the vehicle restart?

The battery is sound.

Carry out a charging circuit test, Phase
1 (see Technical Note 6014A), Phase
2 (see MR 372, 87G, Engine
compartment connection unit).
AB
NO
YESC
NO
YES