heater RENAULT SCENIC 2011 J95 / 3.G Engine And Peripherals EDC16C36 Owner's Manual

13B-384
AFTER REPAIRCarry out a road test followed by a complete check with the diagnostic tool.
V9 MR-372-J84-13B450$190.mif
DIESEL INJECTION
Fault finding – Fault Finding Chart13B
ALP2
CONTINUED 1
Test the high pressure fuel circuit:
Run the scenario SC035 High pressure fuel circuit fault finding (see Interpretation of commands).
Check that the heater plugs are actuated using the AC037 Preheating relay command.
Check the tightness and the condition of the inlet circuit: run test 4: Turbocharged air inlet circuit check and
follow the procedure.
Check that the exhaust is not blocked, run test 1 Exhaust system check and follow the procedure.
Check the consistency of the signal from the engine coolant temperature sensor.
Check the operation of the rail pressure regulator (DRV) using command AC011 Rail pressure regulator.
Check the timing setting.
End of part A
EDC16 C36
Program No.: 91
Vdiag No.: 44, 4C, 48,
50, 54, 58

13B-431V9 MR-372-J84-13B450$210.mif
DIESEL INJECTION
Fault finding – Glossary13B
EDC16 C36
Program No.: 91
Vdiag No.: 44, 4C, 48,
50, 54, 58
(R = Resistance)Air temperature sensorR = 3714 Ω ± 161 at + 10°C/
2448 Ω ± 96 at +20°C/
1671 Ω ± 59 at +30°C
Coolant temperature sensorConnection code3JK: Earth,
Connection code 3C: Signal (ELTH type)
R = 2252 Ω ± 112 at 25°C
811 Ω ± 39 at 50°C
283 Ω ± 8 at 80°C
Diesel fuel temperature sensorConnection code 3FAB: Signal,
Connection code 3LD: Earth (ELTH type)
R = 3820 Ω ± 282 Ω at +10°C/
2050 Ω ± 100 Ω at + 25°C/
810 Ω ± 47 Ω at +50°C
Accelerator pedal sensorR gang 1 = 1700 ± 900Ω
R gang 2 = 2850 ± 2050Ω
Heater plugR = 0.6 Ω at + 20°C / 2 Ω max
Max current drawn:
28 A at 0 s
12 A at 10 s
7 A after 30 s
Turbine upstream temperature
sensorConnection code 3ABT: Earth,
Connection code 3ABS: Signal (NTK type)
Particle filter differential pressure
sensorConnection code 3AAQ: 5 V,
Connection code 3TM: Earth,
Connection code 3TL: Signal
(BOSCH)
Temperature sensor upstream of
the particle filterConnection code 3TD: Signal,
Connection code 3XT: Earth (DENZO)
Temperature sensor downstream
of the particle filterConnection code 3TG: Signal,
Connection code 3XU: Earth (DENZO)
Water in diesel fuel sensorAccording to application (ZERTAN)