check engine RENAULT SCENIC 2012 J95 / 3.G Engine And Peripherals EDC16CP33 Workshop Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2012, Model line: SCENIC, Model: RENAULT SCENIC 2012 J95 / 3.GPages: 510, PDF Size: 2.98 MB
Page 396 of 510
13B-396V12 MR-372-J84-13B300$122.mif
DIESEL INJECTION
Fault finding – Interpretation of parameters13B
OCR*: Opening Cyclic Ratio
PR484FUEL REGULATION SOLENOID VALVE OCR*
PARAMETER
DEFINITIONThis parameter indicates the solenoid valve opening ratio as a %.
Conformity check with engine stopped and ignition on.
The value of the solenoid valve opening ratio must be:
PR484 = 0%.
In the event of a fault, consult the interpretation of DF897 Pump pressure regulator circuit.
Conformity check: Engine running, engine coolant temperature > 80°C
The solenoid valve opening value must be between:
30% < PR484 < 40%.
In the event of a fault, refer to the interpretation of fault DF897.
EDC16CP33_V18_PR484 / EDC16CP33_V1C_PR484 / EDC16CP33_V54_PR484 / EDC16CP33_V20_PR484 / EDC16CP33_V58_PR484 /
EDC16CP33_V5C_PR484 / EDC16CP33_V24_PR484 / EDC16CP33_V04_PR484 / EDC16CP33_V08_PR484 / EDC16CP33_V44_PR484 /
EDC16CP33_V4C_PR484 / EDC16CP33_V34_PR484 / EDC16CP33_V38_PR484 / EDC16CP33_V74_PR484 / EDC16CP33_V28_PR484 /
EDC16CP33_V62_PR484 / EDC16CP33_V26_PR484 / EDC16CP33_V60_PR484
EDC16CP33
Program No.: C4
Vdiag No.: 04, 08, 18, 1C,
20, 24, 26, 28, 34, 38, 44,
4C, 54, 58, 5C, 60, 62, 74
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
Page 397 of 510
13B-397V12 MR-372-J84-13B300$122.mif
DIESEL INJECTION
Fault finding – Interpretation of parameters13B
PR490ENGINE AIR FLOW
PARAMETER
DEFINITIONThis parameter indicates the air flow entering the engine in mg/st.
NOTESNone.
Conformity check: Engine stopped and ignition on
The inlet air flow value must be:
PR490 = 0 mg/st.
Conformity check with the engine running and engine coolant temperature > 80°C
The inlet air flow value must be:
PR490 ± 500 mg/st.
EDC16CP33_V18_PR490 / EDC16CP33_V1C_PR490 / EDC16CP33_V54_PR490 / EDC16CP33_V20_PR490 / EDC16CP33_V58_PR490 /
EDC16CP33_V5C_PR490 / EDC16CP33_V24_PR490 / EDC16CP33_V04_PR490 / EDC16CP33_V08_PR490 / EDC16CP33_V44_PR490 /
EDC16CP33_V4C_PR490 / EDC16CP33_V34_PR490 / EDC16CP33_V38_PR490 / EDC16CP33_V74_PR490 / EDC16CP33_V28_PR490 /
EDC16CP33_V62_PR490 / EDC16CP33_V26_PR490 / EDC16CP33_V60_PR490
EDC16CP33
Program No.: C4
Vdiag No.: 04, 08, 18, 1C,
20, 24, 26, 28, 34, 38, 44,
4C, 54, 58, 5C, 60, 62, 74
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
Page 398 of 510
13B-398V12 MR-372-J84-13B300$122.mif
DIESEL INJECTION
Fault finding – Interpretation of parameters13B
PR667TURBINE UPSTREAM TEMPERATURE
PARAMETER
DEFINITIONThis parameter indicates the turbine upstream temperature in °C.
NOTESNone.
Conformity check: Engine stopped and ignition on, or Engine running and engine coolant
temperature > 80°C
The value of the turbine upstream air temperature must be:
PR667 ≈ 200°C.
In the event of a fault, refer to the interpretation of fault DF652 Turbine upstream temperature sensor circuit.
EDC16CP33_V18_PR667 / EDC16CP33_V1C_PR667 / EDC16CP33_V54_PR667 / EDC16CP33_V20_PR667 / EDC16CP33_V58_PR667 /
EDC16CP33_V5C_PR667 / EDC16CP33_V24_PR667 / EDC16CP33_V28_PR667 / EDC16CP33_V62_PR667 / EDC16CP33_V26_PR667 /
EDC16CP33_V60_PR667
EDC16CP33
Program No.: C4
Vdiag No.: 18, 1C, 20, 24,
26, 28, 54, 58, 5C, 60, 62
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
Page 399 of 510
13B-399V12 MR-372-J84-13B300$122.mif
DIESEL INJECTION
Fault finding – Interpretation of parameters13B
PR668TURBINE UPSTREAM TEMPERATURE SENSOR VOLTAGE
PARAMETER
DEFINITIONThis parameter indicates the turbine upstream temperature sensor voltage in volts.
NOTESNone.
Conformity check with engine stopped and ignition on, or engine running, and engine coolant
temperature > 80°C
The turbine upstream temperature sensor voltage value must be between:
PR668 ≈ 5 V.
In the event of a fault, consult the interpretation of fault DF652 Turbine upstream temperature sensor circuit.
EDC16CP33_V18_PR668 / EDC16CP33_V1C_PR668 / EDC16CP33_V54_PR668 / EDC16CP33_V20_PR668 / EDC16CP33_V58_PR668 /
EDC16CP33_V5C_PR668 / EDC16CP33_V24_PR668 / EDC16CP33_V28_PR668 / EDC16CP33_V62_PR668 / EDC16CP33_V26_PR668 /
EDC16CP33_V60_PR668
EDC16CP33
Program No.: C4
Vdiag No.: 18, 1C, 20, 24,
26, 28, 54, 58, 5C, 60, 62
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
Page 400 of 510
13B-400V12 MR-372-J84-13B300$122.mif
DIESEL INJECTION
Fault finding – Interpretation of parameters13B
PR672DAMPER VALVE POSITION SETPOINT
PARAMETER
DEFINITIONThis parameter indicates the damper valve position setpoint as a %.
NOTESNone.
Conformity check: Engine stopped and ignition on, or Engine running and engine coolant
temperature > 80°C without electrical consumers
The value of the damper valve position must be:
PR672 < 5%.
In the event of a fault, consult the interpretation for fault DF323 Damper valve.
EDC16CP33_V18_PR672 / EDC16CP33_V1C_PR672 / EDC16CP33_V54_PR672 / EDC16CP33_V20_PR672 / EDC16CP33_V58_PR672 /
EDC16CP33_V5C_PR672 / EDC16CP33_V24_PR672 / EDC16CP33_V04_PR672 / EDC16CP33_V08_PR672 / EDC16CP33_V44_PR672 /
EDC16CP33_V4C_PR672 / EDC16CP33_V34_PR672 / EDC16CP33_V38_PR672 / EDC16CP33_V74_PR672 / EDC16CP33_V28_PR672 /
EDC16CP33_V62_PR672 / EDC16CP33_V26_PR672 / EDC16CP33_V60_PR672
EDC16CP33
Program No.: C4
Vdiag No.: 04, 08, 18, 1C,
20, 24, 26, 28, 34, 38, 44,
4C, 54, 58, 5C, 60, 62, 74
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
Page 401 of 510
13B-401V12 MR-372-J84-13B300$122.mif
DIESEL INJECTION
Fault finding – Interpretation of parameters13B
PR739FUEL FLOW SOLENOID VALVE CURRENT
PARAMETER
DEFINITIONThis parameter indicates the current absorbed by the fuel flow solenoid valve inmA.
Conformity check with engine stopped and ignition on.
The value of the current absorbed by the fuel flow solenoid valve must be:
PR739 ≈ 200 mA.
In the event of a fault, consult the interpretation of DF897 Pump pressure regulator circuit.
Conformity check with the engine running and engine coolant temperature > 80°C
The value of the current absorbed by the fuel flow solenoid valve must be:
PR739 ≈ 300 mA.
In the event of a fault, refer to the interpretation of fault DF897.
EDC16CP33_V18_PR739 / EDC16CP33_V1C_PR739 / EDC16CP33_V54_PR739 / EDC16CP33_V20_PR739 / EDC16CP33_V58_PR739 /
EDC16CP33_V5C_PR739 / EDC16CP33_V24_PR739 / EDC16CP33_V04_PR739 / EDC16CP33_V08_PR739 / EDC16CP33_V44_PR739 /
EDC16CP33_V4C_PR739 / EDC16CP33_V34_PR739 / EDC16CP33_V38_PR739 / EDC16CP33_V74_PR739 / EDC16CP33_V28_PR739 /
EDC16CP33_V62_PR739 / EDC16CP33_V26_PR739 / EDC16CP33_V60_PR739
EDC16CP33
Program No.: C4
Vdiag No.: 04, 08, 18, 1C,
20, 24, 26, 28, 34, 38, 44,
4C, 54, 58, 5C, 60, 62, 74
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
Page 402 of 510
13B-402V12 MR-372-J84-13B300$122.mif
DIESEL INJECTION
Fault finding – Interpretation of parameters13B
PR747DAMPER VALVE POSITION
PARAMETER
DEFINITIONThis parameter indicates the damper valve position as a %.
NOTESNone.
Conformity check with engine stopped and ignition on.
The value of the damper valve position must be:
PR747 = 0% (with the engine stopped),
PR747 ≈ 5% (with the ignition on).
In the event of a fault, consult the interpretation of faults DF645 Damper valve position regulation, DF646
Damper valve position sensor and DF323 Damper valve.
Conformity check with the engine running and engine coolant temperature > 80°C
The value of the damper valve position must be:
PR747 ≈ 5% (at idle speed).
In the event of a fault, refer to the interpretation of faults DF645, DF646 and DF323.
EDC16CP33_V18_PR747 / EDC16CP33_V1C_PR747 / EDC16CP33_V54_PR747 / EDC16CP33_V20_PR747 / EDC16CP33_V58_PR747 /
EDC16CP33_V5C_PR747 / EDC16CP33_V24_PR747 / EDC16CP33_V04_PR747 / EDC16CP33_V08_PR747 / EDC16CP33_V44_PR747 /
EDC16CP33_V4C_PR747 / EDC16CP33_V34_PR747 / EDC16CP33_V38_PR747 / EDC16CP33_V74_PR747 / EDC16CP33_V28_PR747 /
EDC16CP33_V62_PR747 / EDC16CP33_V26_PR747 / EDC16CP33_V60_PR747
EDC16CP33
Program No.: C4
Vdiag No.: 04, 08, 18, 1C,
20, 24, 26, 28, 34, 38, 44,
4C, 54, 58, 5C, 60, 62, 74
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
Page 403 of 510
13B-403V12 MR-372-J84-13B300$122.mif
DIESEL INJECTION
Fault finding – Interpretation of parameters13B
PR782TURBINE UPSTREAM PRESSURE SENSOR VOLTAGE
PARAMETER
DEFINITIONThis parameter indicates the turbine upstream pressure sensor voltage in volts.
NOTESSpecial notes:
Only perform these tests if the parameters do not correspond with the system
operation programming.
Conformity check: Engine stopped and ignition on, or engine running, and engine coolant
temperature > 80°C
The turbine upstream pressure sensor voltage value must be between:
PR782 ≈ 5 V.
In the event of a fault consult the interpretation of fault DF651 Turbine upstream pressure sensor circuit.
EDC16CP33_V18_PR782 / EDC16CP33_V1C_PR782 / EDC16CP33_V54_PR782 / EDC16CP33_V20_PR782 / EDC16CP33_V58_PR782 /
EDC16CP33_V5C_PR782 / EDC16CP33_V24_PR782 / EDC16CP33_V28_PR782 / EDC16CP33_V62_PR782 / EDC16CP33_V26_PR782 /
EDC16CP33_V60_PR782
EDC16CP33
Program No.: C4
Vdiag No.: 18, 1C, 20, 24,
26, 54, 58, 5C, 60
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
Page 404 of 510
13B-404V12 MR-372-J84-13B300$122.mif
DIESEL INJECTION
Fault finding – Interpretation of parameters13B
PR784
PR785
PR786
PR787
PR788
PR789
PR790
PR791
PR792
PR793DF312 RECORD No. 1
DF312 RECORD No. 2
DF312 RECORD No. 3
DF312 RECORD No. 4
DF312 RECORD No. 5
DF312 RECORD No. 6
DF312 RECORD No. 7
DF312 RECORD No. 8
DF312 RECORD No. 9
DF312 RECORD No. 10
PARAMETER
DEFINITIONThese parameters are shown in miles (km).
NOTESSpecial notes:
These parameters must only be interpreted for DF312 Speed request if it is present
or stored.
Conformity check with engine stopped and ignition on, or engine running, and engine coolant
temperature > 80°C
In the event of a fault, refer to the interpretation of fault DF312.
EDC16CP33_V18_PR784 / EDC16CP33_V18_PR785 / EDC16CP33_V18_PR786 / EDC16CP33_V18_PR787 / EDC16CP33_V18_PR788 /
EDC16CP33_V18_PR789 / EDC16CP33_V18_PR790 / EDC16CP33_V18_PR791 / EDC16CP33_V18_PR792 / EDC16CP33_V18_PR793 /
EDC16CP33_V1C_PR784 / EDC16CP33_V1C_PR785 / EDC16CP33_V1C_PR786 / EDC16CP33_V1C_PR787 / EDC16CP33_V1C_PR788 /
EDC16CP33_V1C_PR789 / EDC16CP33_V1C_PR790 / EDC16CP33_V1C_PR791 / EDC16CP33_V1C_PR792 / EDC16CP33_V1C_PR793 /
EDC16CP33_V54_PR784 / EDC16CP33_V54_PR785 / EDC16CP33_V54_PR786 / EDC16CP33_V54_PR787 / EDC16CP33_V54_PR788 /
EDC16CP33_V54_PR789 / EDC16CP33_V54_PR790 / EDC16CP33_V54_PR791 / EDC16CP33_V54_PR792 / EDC16CP33_V54_PR793 /
EDC16CP33_V20_PR784 / EDC16CP33_V58_PR785 / EDC16CP33_V20_PR786 / EDC16CP33_V20_PR787 / EDC16CP33_V20_PR788 /
EDC16CP33_V20_PR789 / EDC16CP33_V20_PR790 / EDC16CP33_V20_PR791 / EDC16CP33_V20_PR792 / EDC16CP33_V20_PR793 /
EDC16CP33_V58_PR784 / EDC16CP33_V58_PR785 / EDC16CP33_V58_PR786 / EDC16CP33_V58_PR787 / EDC16CP33_V58_PR788 /
EDC16CP33_V58_PR789 / EDC16CP33_V58_PR790 / EDC16CP33_V58_PR791 / EDC16CP33_V58_PR792 / EDC16CP33_V58_PR793 /
EDC16CP33_V5C_PR784 / EDC16CP33_V5C_PR785 / EDC16CP33_V5C_PR786 / EDC16CP33_V5C_PR787 / EDC16CP33_V5C_PR788 /
EDC16CP33_V5C_PR789 / EDC16CP33_V5C_PR790 / EDC16CP33_V5C_PR791 / EDC16CP33_V5C_PR792 / EDC16CP33_V5C_PR793 /
EDC16CP33_V24_PR784 / EDC16CP33_V24_PR785 / EDC16CP33_V24_PR786 / EDC16CP33_V24_PR787 / EDC16CP33_V24_PR788 /
EDC16CP33_V24_PR789 / EDC16CP33_V24_PR790 / EDC16CP33_V24_PR791 / EDC16CP33_V24_PR792 / EDC16CP33_V24_PR793 /
EDC16CP33_V26_PR784 / EDC16CP33_V26_PR785 / EDC16CP33_V26_PR786 / EDC16CP33_V26_PR787 / EDC16CP33_V26_PR788 /
EDC16CP33_V26_PR789 / EDC16CP33_V26_PR790 / EDC16CP33_V26_PR791 / EDC16CP33_V26_PR792 / EDC16CP33_V26_PR793 /
EDC16CP33_V60_PR784 / EDC16CP33_V60_PR785 / EDC16CP33_V60_PR786 / EDC16CP33_V60_PR787 / EDC16CP33_V60_PR788 /
EDC16CP33_V60_PR789 / EDC16CP33_V60_PR790 / EDC16CP33_V60_PR791 / EDC16CP33_V60_PR792 / EDC16CP33_V60_PR793
EDC16CP33
Program No.: C4
Vdiag No.: 18, 1C, 20, 24,
26, 54, 58, 5C, 60
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
Page 406 of 510
13B-406V12 MR-372-J84-13B300$122.mif
DIESEL INJECTION
Fault finding – Interpretation of parameters13B
PR794
PR795
PR796
PR797
PR798
PR799
PR800
PR801
PR802
PR803STORED REGENERATION FAILURE NO. 1
STORED REGENERATION FAILURE NO. 2
STORED REGENERATION FAILURE NO. 3
STORED REGENERATION FAILURE NO. 4
STORED REGENERATION FAILURE NO. 5
STORED REGENERATION FAILURE NO. 6
STORED REGENERATION FAILURE NO. 7
STORED REGENERATION FAILURE NO. 8
STORED REGENERATION FAILURE NO. 9
STORED REGENERATION FAILURE NO. 10
PARAMETER
DEFINITIONThese parameters are shown in miles (km).
NOTESSpecial notes:
These parameters must only be interpreted for DF312 Speed request if it is present
or stored.
Conformity check with engine stopped and ignition on, or engine running, and engine coolant
temperature > 80°C
These parameters are used so that the history of the last ten regeneration failures when driving can be found.
EDC16CP33_V18_PR794 / EDC16CP33_V18_PR795 / EDC16CP33_V18_PR796 / EDC16CP33_V18_PR797 / EDC16CP33_V18_PR798 /
EDC16CP33_V18_PR799 / EDC16CP33_V18_PR800 / EDC16CP33_V18_PR801 / EDC16CP33_V18_PR802 / EDC16CP33_V18_PR803 /
EDC16CP33_V1C_PR794 / EDC16CP33_V1C_PR795 / EDC16CP33_V1C_PR796 / EDC16CP33_V1C_PR797 / EDC16CP33_V1C_PR798 /
EDC16CP33_V1C_PR799 / EDC16CP33_V1C_PR800 / EDC16CP33_V1C_PR801 / EDC16CP33_V1C_PR802 / EDC16CP33_V1C_PR803 /
EDC16CP33_V54_PR794 / EDC16CP33_V54_PR795 / EDC16CP33_V54_PR796 / EDC16CP33_V54_PR797 / EDC16CP33_V54_PR798 /
EDC16CP33_V54_PR799 / EDC16CP33_V54_PR800 / EDC16CP33_V54_PR801 / EDC16CP33_V54_PR802 / EDC16CP33_V54_PR803 /
EDC16CP33_V20_PR794 / EDC16CP33_V20_PR795 / EDC16CP33_V20_PR796 / EDC16CP33_V20_PR797 / EDC16CP33_V20_PR798 /
EDC16CP33_V20_PR799 / EDC16CP33_V20_PR800 / EDC16CP33_V20_PR801 / EDC16CP33_V20_PR802 / EDC16CP33_V20_PR803 /
EDC16CP33_V58_PR794 / EDC16CP33_V58_PR795 / EDC16CP33_V58_PR796 / EDC16CP33_V58_PR797 / EDC16CP33_V58_PR798 /
EDC16CP33_V58_PR799 / EDC16CP33_V58_PR800 / EDC16CP33_V58_PR801 / EDC16CP33_V58_PR802 / EDC16CP33_V58_PR803 /
EDC16CP33_V5C_PR794 / EDC16CP33_V5C_PR795 / EDC16CP33_V5C_PR796 / EDC16CP33_V5C_PR797 / EDC16CP33_V5C_PR798 /
EDC16CP33_V5C_PR799 / EDC16CP33_V5C_PR800 / EDC16CP33_V5C_PR801 / EDC16CP33_V5C_PR802 / EDC16CP33_V5C_PR803 /
EDC16CP33_V24_PR794 / EDC16CP33_V24_PR795 / EDC16CP33_V24_PR796 / EDC16CP33_V24_PR797 / EDC16CP33_V24_PR798 /
EDC16CP33_V24_PR799 / EDC16CP33_V24_PR800 / EDC16CP33_V24_PR801 / EDC16CP33_V24_PR802 / EDC16CP33_V24_PR803 /
EDC16CP33_V26_PR794 / EDC16CP33_V26_PR795 / EDC16CP33_V26_PR796 / EDC16CP33_V26_PR797 / EDC16CP33_V26_PR798 /
EDC16CP33_V26_PR799 / EDC16CP33_V26_PR800 / EDC16CP33_V26_PR801 / EDC16CP33_V26_PR802 / EDC16CP33_V26_PR803 /
EDC16CP33_V60_PR794 / EDC16CP33_V60_PR795 / EDC16CP33_V60_PR796 / EDC16CP33_V60_PR797 / EDC16CP33_V60_PR798 /
EDC16CP33_V60_PR799 / EDC16CP33_V60_PR800 / EDC16CP33_V60_PR801 / EDC16CP33_V60_PR802 / EDC16CP33_V60_PR803
EDC16CP33
Program No.: C4
Vdiag No.: 18, 1C, 20, 24,
26, 54, 58, 5C, 60
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.