remove seats RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual

37A-46
MECHANICAL COMPONENT CONTROLS
Parking brake lever: Removal - Refitting
37A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 411, 02A, Lifting equip-
ment).
aRelease the parking brake lever.
aRemove:
-the heat shield clips (1) ,
-the heat shield (2) .aRemove the parking brake lever adjusting nut (3) .
aDetach the parking brake cables from the compen-
sator.
aRemove:
-the parking brake lever compensator (4) ,
-the front seats, completely (see Complete front
seat: Removal - Refitting) (MR 412 Bodywork,
75A, Front seat frames and runners).
aDepending on the equipment level, remove:
-the rear bench seatback (see Rear bench seat-
back: Removal - Refitting) (MR 412 Bodywork,
76A, Rear seat frames and runners),
-the rear bench seat base (see Rear bench seat
base: Removal - Refitting) (MR 412 Bodywork,
76A, Rear seat frames and runners)
-the rear seats, completely (see Complete rear
seat: Removal - Refitting) (MR 412 Bodywork,
76A, Rear seat frames and runners).
aPartially remove the floor carpet to access the park-
ing brake lever (see Floor carpet: Removal - Refit-
ting) (MR 412 Bodywork, 71A, Body internal trim). Tightening torquesm
par king brake lever nuts8 Nm
121325
121334

37A-47
MECHANICAL COMPONENT CONTROLS
Parking brake lever: Removal - Refitting
37A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the nuts (6) from the parking brake lever,
-the parking brake lever (7) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the parking brake lever,
-the parking brake lever nuts.
aTorque tighten the parking brake lever nuts (8
Nm).
II - FINAL OPERATION.
aFit the floor carpet (see Floor carpet: Removal -
Refitting) (MR 412 Bodywork, 71A, Body internal
trim).
aRefit (depending on equipment level):
-the rear seats, completely (see Complete rear
seat: Removal - Refitting) (MR 412 Bodywork,
76A, Rear seat frames and runners),
-the rear bench seat base (see Rear bench seat
base: Removal - Refitting) (MR 412 Bodywork,
76A, Rear seat frames and runners),-the rear bench seatback (see Rear bench seat-
back: Removal - Refitting) (MR 412 Bodywork,
76A, Rear seat frames and runners).
aRefit the front seats, completely (see Complete
front seat: Removal - Refitting) (MR 412 Body-
work, 75A, Front seat frames and runners).
aAttach the parking brake cables to the compensator.
aRefit the parking brake lever adjusting nut.
aAdjust the parking brake lever (see 37A, Mechani-
cal component controls, Parking brake lever:
Adjustment, page 37A-48) .
aRefit:
-the heat shield,
-the heat shield clips.
121607