diagnostic menu RENAULT TWINGO RS 2009 2.G Electrical Equipment - Radio R01-08 Workshop Manual

86A-25V2 MR-413-X44-86A100$080.mif
86A
R01-08
Vdiag No.: A4
Available configuration and operating mode
SC002 Computer configuration.
This configuration is used to configure the computer according to the vehicle equipment level.
Reread the configuration in the "configuration reading" menu to confirm that the modification was correctly stored
using the configuration readings.
Configuration modification procedure:
•Activate the + after ignition feed.
•Connect the diagnostic tool and switch on the radio.
•Establish dialogue with the computer.
•Select the Repair mode menu.
•Select the Configuration and programming menu.
•Select the special command SC002 Computer configuration.
•Select the connection in the drop-down menu that corresponds to the vehicle.
•Click on Confirm.
•Exit diagnostic mode (ends dialogue with the computer without switching off the tool), switch off the ignition for
30 seconds and then switch the ignition back on.
•Establish dialogue with the computer.
•Check to see that the configurations have been correctly stored in the Configuration reading menu.
RADIO
Fault finding – Configurations