diagram RENAULT TWINGO RS 2009 2.G Electrical Equipment - Radio R2-08 Owner's Guide

86A-101
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 15 Telephone communication is poor
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
Check the microphone using command AC010
Microphone test.
Is the result of the check correct?
Is the telephone reception area good enough to
do the test?Go to an area with good telephone
reception to do the test.
If the fault is still present, contact Techline.
Contact the Techline.
NOA
YES
NO
YES
R208_V64_ALP15

86A-103
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 16 Voice recognition does not work or does not work properly
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
Check the microphone using command AC010 Microphone test.
Is the result of the check correct? Contact the Techline.
Check the condition and connection of the connectors of the
microphone, component code 789 and of the radio, component
code 261.
If the connectors are faulty and if there is a repair procedure
(see Technical Note 6015A, Repairing electrical wiring, Wiring:
Precautions for repair), repair the connector, otherwise replace
the wiring.
Check the continuity, insulation and absence of interference
resistance on the following connections:
•107G between components 789 and 261,
•107F between components 789 and 261,
•107J between components 789 and 261.If the connection or
connections are faulty and
there is a repair procedure
(see Technical Note
6015A, Electrical wiring
repair, Wiring:
Precautions for repair),
repair the wiring, otherwise
replace it.
Are the checks correct?
Replace the microphone, component code 789 (see MR 392
(Clio III) or MR 411 (New Twingo), 86B, Car phone,
"Hands-free" microphone: Removal - Refitting).
YES
NO
NO
YES
R208_V64_ALP16

86A-104
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 17 Problem pairing my telephone to the radio
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
Consult the list of compatible phones on
Renault.net.
Is the customer's phone in the list of compatible
phones authorised by Renault?Explain to the customer that the phone is not
compatible with this radio.
Is it possible to pair another compatible phone
to this radio?Contact the Techline.
Is it possible to pair the customer's phone to
this radio when outside?The problem disappears.
Is the customer's phone working properly?Explain to the customer that the phone must
be replaced.
Contact the Techline.
NO
YES
NO
YES
YES
NO
NO
YES
R208_V64_ALP17

86A-105
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 18 Fault when using the mobile connectivity terminal
NOTESSee Clio III or New Twingo wiring diagrams.
ALP 18 is used to run fault finding on the mobile connectivity terminal if a mobile
connectivity computer is not fitted on the vehicle.
In a vehicle equipped with a navigation computer, the terminal is connected to the
navigation computer, component code 662. Otherwise, it is connected to the radio,
component code 261.
Is the mobile device connected to the mobile connectivity
terminal switched on and is the volume sufficient?Increase the volume of the
mobile device.
Does the customer's mobile device operate correctly with
earphones that are in good condition?Explain to the customer that the
mobile device is defective.
Check the condition (appearance check) of the cable
connecting the mobile device to the analogue terminal.
Explain to the customer that the
cable of the mobile device is
faulty. Are the checks correct?
NO
YES
NO
YES
NO
YES
A
R208_V64_ALP18