audio RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual

86A-1
RADIO
Radio: List and location of components
WITH 2 SPEAKERS, WITHOUT RADIO or WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 01 or RADIO
NO. 03
86A
I - LIST OF COMPONENTS
II - LOCATION OF COMPONENTS
Radio (1)Radio (1) No. Description
(1) Radio
(2) Display
(3) Radio control satellite
(4) Radio aerial
(5) Tweeters
(6) Front speakers
(7) Rear speakers
(8) Offset audio socket (mp3)
RADIO NO. 01
119708
RADIO NO. 03
121084

86A-3
RADIO
Radio: List and location of components
WITH 2 SPEAKERS, WITHOUT RADIO or WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 01 or RADIO
NO. 03
86A
Tweeter speakers (5)
Front speakers (6)Rear speakers (7)
Offset audio socket (mp3) (8)
120274
119277
WITH 4 SPEAKERS, WITHOUT RADIO or RADIO
NO. 03
121075
RADIO NO. 03
121381

86A-4
RADIO
Radio: Removal - Refitting
RADIO NO. 01 or RADIO NO. 03
86A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aSwitch off the ignition.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the radio using two (Ms. 1373) (1) .
aMark the routing of the wiring behind the radio.
aDisconnect the audio equipment connectors.
aMark the routing of the aerial cable behind the radio.
aDisconnect the aerial cable from the radio.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aConnect the aerial cable to the radio.
aClip the aerial cable into the position marked during
removal.
aConnect the radio connectors.
aFit the wiring in the position marked during removal.aRefit the radio.
II - FINAL OPERATION.
aCarry out the necessary operations (see Fault fin-
ding - Replacement of components) (MR 413,
86A, Radio). Special tooling required
Ms. 1373Tool for removing radios or
chronotachographs.
120073

86A-13
RADIO
Offset multimedia socket: Removal - Refitting
RADIO NO. 03
86A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the radio (see 86A, Radio, Radio: Removal - Re-
fitting, page 86A-4) ,
-the centre console (see Centre console: Removal
- Refitting) (MR 412, 57A, Interior equipment),
-the centre front panel (see Centre front panel: Re-
moval - Refitting) (MR 412, 57A, Interior equip-
ment).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aMark the routing of the offset audio socket wiring (1)
behind the radio.
aRemove:
-the bolts (2) ,
-the offset audio connection.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the offset audio connection,
-the offset audio socket bolts.
aFit the wiring of the offset audio socket in the posi-
tion marked during the removal operation.II - FINAL OPERATION.
aRefit:
-the centre front panel (see Centre front panel: Re-
moval - Refitting) (MR 412, 57A, Interior equip-
ment),
-the centre console (see Centre console: Removal
- Refitting) (MR 412, 57A, Interior equipment),
-the radio (see 86A, Radio, Radio: Removal - Re-
fitting, page 86A-4) .
121381