instrument panel RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual TWINGO RS 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1692/w960_1692-0.png RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual

Page 1 of 241

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual © Renault s.a.s 2007 "The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a resu

Page 4 of 241

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual Contents
82A ENGINE IMMOBILISER
Immobiliser system: List and 
location of components 82A-1
Ignition switch: Removal - 
Refitting 82A-3
Transponder ring: Removal - 
Refitting 82A-6
Battery for remote

Page 45 of 241

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual 82A-5
ENGINE IMMOBILISER
Ignition switch: Removal - Refitting
82A
III - FINAL OPERATION.
aRefit:
-the antenna/transponder ring (see 82A, Engine
immobiliser, Transponder ring: Removal - Re-
fitting, pa

Page 47 of 241

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual 82A-7
ENGINE IMMOBILISER
Transponder ring: Removal - Refitting
82A
II -  OPERATION FOR REMOVAL OF PART 
CONCERNED
aUnclip:
-the connector (5) ,
-the two antenna/transponder ring tabs (6) .
aDisconnect

Page 50 of 241

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual 83A-1
INSTRUMENT PANEL
Instrument panel: Removal - Refitting
83A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aIf replacing an instrument panel, carry out the neces-
sary operations using the Diagnostic

Page 51 of 241

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual 83A-2
INSTRUMENT PANEL
Instrument panel: Removal - Refitting
83A
aClip on the instrument panel.
aRefit the instrument panel bolts.
aClip on the instrument panel visor.
II -  FINAL OPERATION.
aIf repla

Page 52 of 241

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual 83A-3
INSTRUMENT PANEL
Rev counter: Removal - Refitting
ENGINE REV COUNTER
83A
REMOVAL
OPERATION FOR REMOVAL OF PART 
CONCERNED
aUnclip the rear trim (1) from the rev counter.aRemove the nut (2) from

Page 60 of 241

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual 84A-5
CONTROL - SIGNALS
Steering column switch assembly: Removal - Refitting84A
aCheck that the rotary switch is positioned correctly:
the outlet for the drivers front airbag (9) wiring
always must b

Page 62 of 241

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual 84A-7
CONTROL - SIGNALS
Screen wiper switch: Removal - Refitting
84A
II -  OPERATION FOR REMOVAL OF PART 
CONCERNED
aDisconnect the connector (5) .
aRemove the windscreen wiper switch by pressing
down

Page 64 of 241

RENAULT TWINGO RS 2009 2.G Electrical Equipment Workshop Manual 84A-9
CONTROL - SIGNALS
Signals and lighting switch: Removal - Refitting
84A
II -  OPERATION FOR REMOVAL OF PART 
CONCERNED
aDisconnect the connector (5) .
aRemove the signal lighting switch by pressi
Page:   1-10 11-20 21-30 next >