clock RENAULT TWINGO RS 2009 2.G Mechanism And Accessories Workshop Manual

51A-3
SIDE OPENING ELEMENT MECHANISMS
Front side door lock barrel: Removal - Refitting
51A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the front side door trim (see Front side door trim:
Removal - Refitting) (MR 412, 72A, Side opening
element trim),
-the door sealing film (see Door sealing film: Re-
moval - Refitting) (MR 412, 65A, Door sealing).
II - REMOVAL OPERATION FOR PART
CONCERNED
aTurn the locking ring (1) on the door lock barrel by 1/
8 of a turn anti-clockwise.aRemove:
-the locking ring (2) keeping the lug (3) located on
the lower section of the lock barrel unclipped,
-the door lock barrel.
REFITTING
I - REMOVAL PREPARATION OPERATION
aAlways replace the door lock barrel locking ring.
II - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the door lock barrel,
-the door lock barrel locking ring.
aTurn the door lock barrel locking ring by 1/8 of a turn
clockwise.
aCarry out a function test
119293
119294
Note:
Note the direction of fitting of the door lock barrel
locking r ing's:
-mark G for the left-hand side,
-mark D for the right-hand side.