radiator RENAULT TWINGO RS 2009 2.G Mechanism And Accessories Workshop Manual

55A-4
EXTERIOR PROTECTION
Front bumper: Stripping - Rebuilding
55A
aUnclip the lower absorber (4) .
aRemove the plastic welds (5) from the radiator grille.
aRemove the radiator grille.
aRemove the plastic welds (6) from the lower grille.
aRemove the lower grille.aRemove the clips (7) .
aUnclip:
-the lower trim strip,
-the fog light supports (8) .
REBUILDING
I - REBUILDING OPERATION FOR PART
CONCERNED
aClip on the fog light supports (8) .
aPosition the lower trim strip.
aDrill a hole at the position of each of the clips (7)
using a ∅∅ ∅ ∅
4.5 mm drill bit.
aRivet the lower trim.
aPosition:
-the lower grille,
-the radiator grille.
aClip the lower grille and the radiator grille onto the
tabs provided using the clips (part no.: 77 03 076
037).
aClip on the lower absorber (4) .
aPosition the lower cover.
120888
120889120890
Note:
Removing the lower trim strip requires the lower
tr im and the lower absorber to be removed.

55A-7
EXTERIOR PROTECTION
Front bumper: Stripping - Rebuilding
C44, and EQUIPMENT LEVEL SPORT
55A
aDrill out the rivets (3) .aUnclip the lower absorber (4) .
aRemove the diffuser.
aCut the plastic welds of the radiator grille (5) and of
the lower grille (6) .
aRemove the radiator grille and the lower grille.
120887
132035132034
132038

55A-9
EXTERIOR PROTECTION
Front bumper: Stripping - Rebuilding
C44, and EQUIPMENT LEVEL SPORT
55A
II - REBUILDING OPERATION FOR PART
CONCERNED
aPlace the decorative strip to be bonded on the front
bumper and centre it visually.
aStick the decorative strip down taking care to keep it
properly aligned.
aClip:
-the « front side extender - front extender - fog light
support » assembly,
-the aerodynamic component.
aDrill a hole at each clip position (7) using a ∅ 4.5 mm
drill bit.
aRivet the aerodynamic component.
aClip the lower grille and the radiator grille onto the
tabs provided using the clips (part no.: 77 03 076
037).
aRefit the diffuser.
aClip on the lower absorber (4) .
aRefit new rivets.
aClip:
-the central absorber (2) ,
-the badge.
aRefit the front fog lights (see Front fog light: Remo-
val - Refitting) (80B, Headlights).
III - FINAL OPERATION.
aRefit the front bumper (see 55A, Exterior protec-
tion, Front bumper: Removal - Refitting, page
55A-1) .