light RENAULT TWINGO RS 2009 2.G Panelwork Owner's Manual

48A-2
NON-SIDE OPENING ELEMENTS
Bonnet: Removal - Refitting
48A
2 - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the bolts (4) ,
-the bonnet.
IV - REFITTING BY MEANS OF THE BONNET
HINGE BOLTS
1 - OPERATION FOR REFITTING PART
CONCERNED
aRefit:
-the bonnet,
-the bolts (4) .
aAdjust the opening clearances and flush fitting (see
48A, Non-side opening elements, Bonnet: Remo-
val - Refitting, page 48A-1) .
2 - FINAL OPERATION
aClip on the pipe at (2) .
aConnect the pipe at (1) .
aRefit:
-the front wing (see 42A, Front upper structure,
Front wing: Removal - Refitting, page 42A-3) ,
-the halogen headlights (see Halogen headlight:
Removal - Refitting) (MR 411, 80B, Headlights),
-the front bumper (see Front bumper: Removal -
Refitting) (MR 412, 55A, Exterior protection),-the front wheel arch liner (see Front wheel arch
liner: Removal - Refitting) (MR 412, 55A, Exterior
protection).
121519

48A-6
NON-SIDE OPENING ELEMENTS
Tailgate: Removal - Refitting
48A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the tailgate trim (see Tailgate trim: Removal - Re-
fitting) (MR 412, 73A, Non-side opening elements
trim),
-the high level brake light (see 3rd brake light: Re-
moval - Refitting) (MR 411, 81A, Rear lighting).
aRemove the blanking covers (1) .
aDisconnect the connectors:
-the rear screen wiper motor,
-the tailgate lock,
-the tailgate exterior door handle,
-the heated rear screen.
aRemove:
-the tailgate electrical supply harness,
-the tailgate washer jet tube,
-the tailgate gas struts (see Tailgate strut: Remo-
val - Refitting) (MR 412, 52A, Non-side opening
element mechanisms).II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the nuts (2) ,
-the tailgate.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the tailgate,
-the nuts (2) .
II - FINAL OPERATION.
aRefit:
-the tailgate gas strut (see Tailgate strut: Removal
- Refitting) (MR 412, 52A, Non-side opening ele-
ment mechanisms),
-the tailgate washer jet tube,
-the tailgate electrical supply harness,
aConnect the connectors:
-the heated rear screen,
-the tailgate exterior door handle,
-the tailgate lock,
-the rear screen wiper motor,
121306
121518

48A-7
NON-SIDE OPENING ELEMENTS
Tailgate: Removal - Refitting
48A
aRefit:
-the blanking covers (1) ,
-the high level brake light (see 3rd brake light: Re-
moval - Refitting) (MR 411, 81A, Rear lighting),
-the tailgate trim (see Tailgate trim: Removal - Re-
fitting) (MR 412, 73A, Non-side opening elements
trim).

48A-8
NON-SIDE OPENING ELEMENTS
Tailgate: Stripping - Rebuilding
48A
STRIPPING
aDescribed below is a special sequence of operations
for tailgate replacement.
STRIPPING OPERATION FOR PART CONCERNED
aRemove:
-the rear screen wiper arm (see Rear screen wiper
arm: Removal - Refitting) (MR 411, 85A,
Washing - Wiping),
-the tailgate trim (see Tailgate trim: Removal - Re-
fitting) (MR 412, 73A, Non-side opening elements
trim),
-the rear screen wiper motor (see Rear screen wi-
per motor: Removal - Refitting) (MR 411, 85A,
Washing - wiping),
-the tailgate lock (see Tailgate lock: Removal - Re-
fitting) (MR 412, 52A, Non-side opening element
mechanisms),
-the tailgate exterior door handle (see Tailgate ex-
terior opening control: Removal - Refitting) (MR
412, 52A, Non-side opening element mecha-
nisms),
-the high level brake light (see 3rd brake light: Re-
moval - Refitting) (MR 411, 81A, Rear lighting),
-the rear screen (see Rear screen: Removal - Re-
fitting) (MR 412, 54A, Windows),
-the wiring harness,
-the different tailgate blanking covers,
-the tailgate washer jet tube.aRemove:
-the rear parcel shelf mounting hook (1) ,
-the closing end stop (2) .
aRemove (depending on equipment level):
-the rear parcel shelf hinge hook (3) ,
-the rear parcel shelf stop. Note:
It is possible to carry out the trim removal opera-
tions on the vehicle before removing the tailgate.
121149
121148

48A-9
NON-SIDE OPENING ELEMENTS
Tailgate: Stripping - Rebuilding
48A
aRemove the hose (4) .
REBUILDING
REBUILDING OPERATION FOR PART
CONCERNED
aRefit:
-the pipe (4) ,
-the rear parcel shelf stop (depending on equipment
level),
-the rear parcel shelf hinge hook (3) (depending on
equipment level),
-the closing end stop (2) ,
-the rear parcel shelf mounting hook (1) ,
-the different tailgate blanking covers,
-the wiring harness,
-the tailgate washer jet tube,
-the rear screen (see Rear screen: Removal - Re-
fitting) (MR 412, 54A, Windows),
-the high level brake light (see 3rd brake light: Re-
moval - Refitting) (MR 411, 81A, Rear lighting),
-the tailgate exterior door handle (see Tailgate ex-
terior opening control: Removal - Refitting) (MR
412, 52A, Non-side opening element mecha-
nisms),
-the tailgate lock (see Tailgate lock: Removal - Re-
fitting) (MR 412, 52A, Non-side opening element
mechanisms),-the rear screen wiper motor (see Rear screen wi-
per motor: Removal - Refitting) (MR 411, 85A,
Washing - wiping),
-the tailgate trim (see Tailgate trim: Removal - Re-
fitting) (MR 412, 73A, Non-side opening elements
trim),
-the rear screen wiper arm (see Rear screen wiper
arm: Removal - Refitting) (MR 411, 85A,
Washing - wiping).
121220