ground clearance SATURN VUE HYBRID 2007 Owners Manual

Your Driving, the Road, and
Your Vehicle
Whenever we drive, we are taking on an
important responsibility. This is true for any motor
vehicle — passenger car, van, truck, sport utility.
Driver behavior, the driving environment, and the
vehicle’s design all affect how well a vehicle
performs. But statistics show that the most
important factor, by far, is how we drive.
Knowing how these three factors work together can
help you understand how your vehicle handles and
what you can do to avoid many types of crashes,
including a rollover crash.
Driver Behavior
The single most important thing is this: everyone in
the vehicle, including the driver, should buckle up.
SeeSafety Belts: They Are for Everyone on
page 20. In fact, most serious injuries and fatalities
to unbelted occupants can be reduced or prevented
by the use of safety belts. In a rollover crash, an
unbelted person is signicantly more likely to die
than a person wearing a seat belt. In addition,
avoiding excessive speed, sudden or abrupt turns,and drunken or aggressive driving can help make
trips safer and avoid the possibility of a crash,
especially a rollover crash. This section provides
many useful tips to help you drive more safely.
Driving Environment
You can also help avoid a rollover or other type of
crash by being prepared for driving in inclement
weather, at night, or during other times where
visibility or traction may be limited, such as on
curves, slippery roads, or hilly terrain. Unfamiliar
surroundings can also have hidden hazards.
To help you learn more about driving in different
conditions, this section contains information about
city, freeway, and off-road driving, as well as other
hints for driving in various weather conditions.
Vehicle Design
According to the U.S. Department of
Transportation, utility vehicles have a signicantly
higher rollover rate than other types of vehicles.
Utility vehicles do have higher ground clearance
and a narrower track or shorter wheelbase than
passenger cars, to make them more capable for
off-road driving.
232
ProCarManuals.com

Each new wheel should have the same
load-carrying capacity, diameter, width, offset and
be mounted the same way as the one it replaces.
{CAUTION:
Using the wrong replacement wheels,
wheel bolts, or wheel nuts on your vehicle
can be dangerous. It could affect the
braking and handling of your vehicle,
make your tires lose air and make you
lose control. You could have a collision in
which you or others could be injured.
Always use the correct wheel, wheel bolts,
and wheel nuts for replacement.
If you need to replace any of your wheels, wheel
bolts, or wheel nuts, replace them only with
new Saturn original equipment parts. This way,
you will be sure to have the right wheel, wheel
bolts, and wheel nuts for your vehicle.Notice:The wrong wheel can also cause
problems with bearing life, brake cooling,
speedometer or odometer calibration,
headlamp aim, bumper height, vehicle ground
clearance, and tire clearance to the body
and chassis.{CAUTION:
Rust or dirt on a wheel, or on the parts to
which it is fastened, can make wheel nuts
become loose after a time. The wheel could
come off and cause a crash. When you
change a wheel, remove any rust or dirt
from places where the wheel attaches to
the vehicle. In an emergency, you can use a
cloth or a paper towel to do this; but be
sure to use a scraper or wire brush later, if
you need to, to get all the rust or dirt off.
354
ProCarManuals.com